Samsung Dcs 400si Lcd24b, Lcd12b, Std24b, Basic 12b, 7b Keyset User Guide

CONSULTATION HOLDWhen you are talking on an outside line and it is necessary to consult with
another extension:
Press the TRSF key; you will receive transfer dial tone. Your call is placed on
transfer hold.
Dial the extension number.
Consult with the internal party.
Press TRSF to return to the outside party or hang up to transfer the call.
NOTE: Repeatedly pressing the TRSF key will toggle between the outside  party
and internal extension. If necessary you may disconnect either one of the par-
ties...

CONFERENCE CALLSYou may conference up to five parties (you and four others) in any combination
of outside lines and internal stations in any order.
While engaged in a conversation, press the CONF key and receive confer-
ence tone.
Make another call, either intercom or outside, press the CONF key and
receive conference tone.
Make another call or press the CONF key to join all parties.
Repeat the last step until all parties are added.
NOTE: When attempting to add another party to the conference and you...

NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press SPK or the MONITOR key if you are using a 7B phone before
you begin dialing.FORWARD FOLLOW MEWhen you want all calls to your extension forwarded to the extension where you
are now:
Dial 605 plus your extension number.
Receive confirmation tone and hang up.
If you want a specific extension’s calls forwarded to your phone (Remote Call
Forward):
Dial 605 plus the desired extension number.
Receive confirmation...

MY GROUP PICKUPIf desired, a new access code can be assigned to pickup ringing calls in the
same pickup group as you are in. Like “66” above except you do not need to dial
the desired group number. See your installation company for the assigned ac-
cess code. MY GROUP PICKUP:__________________.PRIVACY RELEASEThis feature will allow another station to join in on your conversation by releas-
ing privacy on the C.O. from your phone.
To Release Privacy
While on you are talking on a C.O. line and you wish to...

24 The A key is not used.
The B key inserts a flash.
The C key inserts a pause.
The D key is used for pulse to tone conversion. If your system uses rotary
(or pulse) dialing C.O. lines, pressing D while entering a speed dial number
causes all subsequent digits to be sent as DTMF tones.
The E key is used to hide digits. Display keyset users may want to hide
some speed dial numbers so that they will not show in the display. When you
are entering a telephone number, press E. All subsequent digits will...

26MEMO REDIALINGWhen you are calling directory information, you can store the number you are
given using the SAVE feature. There is no need for pencil and paper.
While you are talking on an outside call, press SAVE.
Dial the telephone number as it is dictated to you on the key pad.
Press SAVE to store the number.
To dial the number, press the SNR button. It will select the same line and dial the
stored number. If necessary, you can select a different line and then press the
SNR button.
PAGING AND...

MEET ME PAGELift the handset.
Press the Meet Me Page (MMPG) key or dial 54.
Dial the desired zone number.
After the attention tone, instruct the paged person to dial 56.
Press WAIT or TRSF.
Remain off-hook until the person dials 56 from any phone.
The paged person will be automatically connected with you.CALL PARK AND PAGEWhen you have an outside call for someone who is not at his/her desk, you can
park the call prior to paging. The DCS 400si offers two different methods:
MANUAL PARK ORBITS
While...

30 NOTES:
1. Display keyset users can view message indications and return them in any
order. See 
Viewing Message Indications
 under 
Display Features
.
2. If the Hot Keypad feature has been turned off, you must first lift the handset
or press SPK or the MONITOR key if you are using a 7B phone before you
begin dialing.
3. If a message has been left at your keyset by a keyset in Auto Answer, you
must manually cancel the message after it has been returned.
PROGRAMMED MESSAGESWhen you will be away from your...

ESTABLISHED CALL PICKUPTo pick up an established call in progress at a single line extension connected
to a computer modem on your PC.
Press the EP key for that station on your keyset and the call is automati-
cally moved to your keyset.
The single line extension on your modem will be disconnected.
NOTE: You must have an assigned (EP key) button on your regular keyset, for
the single line station.APPOINTMENT REMINDER/ALARM
CLOCKThis feature works like an alarm clock. Use it to remind yourself of an...

Press the LISTEN key to turn on the speaker. The microphone is not in use,
so the distant party does not hear other parties present in your office.
Press LISTEN again to turn the speaker off and resume private conversa-
tion.
Repeat if necessary.
NOTE: Depending on speaker volume and the acoustics of your office, it may
be advisable to turn the group listening feature off before hanging up. This will
eliminate a momentary squeal.ACCOUNT CODESWhen equipped with optional equipment, your DCS 400si system...