Samsung CLP 660N User Manual

4.2   
Specifications on print media
Ty p eSizeDimensionsWeighta
a. If media weight is over 105 g/m2 (28 lb bond), use the multi-purpose tray.
Capacityb
b. Maximum capacity may differ depending on media we ight, thickness, and environmental conditions.
Plain paper Letter 216 x 279 mm (8.5 x 11 inches) • 60 to 105 g/m2 (16 to 28 lb 
bond) for the tray
• 60 to 163 g/m
2 (16 to 43 lb 
bond) for the multi-purpose 
tray • 250 sheets of 75 g/m
2 
(20 lb bond) paper for the 
tray
• 100 sheets of 75 g/m
2 
(20...

4.3   
Media sizes supported in each mode
Guidelines for special print media
ModeSizeWeightSource
Single side 
printing All sizes 
supported by 
the machineAll weights 
supported by 
the machine •tray1
• optional tray
• multi-purpose tray
Duplex 
printing
a
a. 75 to 105 g/m2 (20 ~ 28 lb bond) only, and this feature is supported in 
CLP-6xxND.
Letter, A4, 
Legal, Folio, 
Oficio 75 to 90 g/m2 
(20 to 24 lb 
bond) •tray1
• optional tray
• multi-purpose tray
Media typeGuidelines
Envelopes • Successful...

4.4   
Caution  
Using photographic paper or coated paper may cause 
problems, requiring repairs. Su ch repairs are not covered by 
Samsung’s warranty or service agreements.
Preprinted 
paper
• Letterhead must be printed with heat-resistant 
ink that will not melt, vaporize, or release 
hazardous emissions when subjected to the 
printer’s fusing temperature for 0.1 second. 
Check your machine’s specification to view the 
fusing temperature, see page 10.1.
• Letterhead ink must be non-flammable and...

4.5   
Changing the size of the paper in the paper tray
To load longer sizes of paper, such as Legal-sized paper, you need to 
adjust the paper guides to extend the paper tray.
1 Adjust the paper length guide to the desired paper length. It is 
preset to Letter or A4 si ze depending on the country. 
1tray extend lever
2paper length guide
3paper width guide
2After inserting paper into the tray, while pinching the paper width 
guide as shown, move it toward the stack of paper until it lightly 
touches the...

4.6   
In the multi-purpose tray
The multi-purpose tray can hold specia l sizes and types of print material, 
such as postcards, note ca rds, and envelopes. It is useful for single page 
printing on letterhead or colored paper.
Tips on using the multi-purpose tray
• Load only one size of print media at a time in the multi-purpose tray.
• To prevent paper jams, do not add paper when there is still paper in  the multi-purpose tray. This also applies to other types of print media.
• Print media should be...

4.7   
5 After loading paper, set the paper type and size for the multi-
purpose tray. See 
Software section for PC-printing.
Note 
The settings made from the printer driver override the 
settings on the control panel.
6 After printing, close the multi-purpose tray.
Note
Depending on the media type you are using, keep the following 
loading guidelines:
• Envelopes: Place an envelopes flap side up, stamp area 
bottom right.
• Labels: Print side up and top short edge entering the machine  first.
•...

5.1   
5 Basic printing
This chapter explains common printing tasks. 
Printing a document
Your machine allows you to print from various Windows, Macintosh, or 
Linux applications. The exact steps fo r printing a document may vary 
depending on the application you use.
1 Open the document you want to print.
2 Select  Print from the  File menu. The Print window is displayed. It 
may look slightly different de pending on your application.
3 Select  your printer driver  from the Selet Printer  drop-down...

6.1   
6 Maintenance
This chapter provides information for maintaining your machine and the 
toner cartridge.
This chapter includes:
• Printing a machine configuration report
• Printing a network report
• Monitoring the supplies life
• Cleaning your machine
• Maintaining the cartridge
• Redistributing toner
• Replacing the toner cartridge
• Replacing the paper transfer belt
• Maintenance parts
• Managing your machine from the website
Printing a machine configuration report
You can print the machines...

6.2   
2 Using the handle, completely open the front cover.
Caution
• Do not touch the green surface,  the OPC drum or the front of 
the toner cartridge, with your hands or any other material. 
Use the handle on each cartridge in order to avoid touching 
this area.
• Be careful not to scratch the surface of the paper transfer  belt.
• If you leave the front cover open for more than a few minutes,  the OPC drum can be exposed to light. This will cause 
damage to the OPC drum. Cove r the toner cartridge’s...

6.3   
6 With a dry lint-free cloth, wipe away any dust and spilled toner from 
the toner cartridges area and their cavities. 
Note
If toner gets on your clothing, wipe it off with a dry
cloth and wash it in cold water. Hot water sets toner into
fabric.
7 Reinstall all the compartments into  the machine, and close the front 
door.
Maintaining the cartridge
toner cartridge storage
To get the most from the toner cartri dge, keep the following guidelines in 
mind:
• Do not remove the toner cartridge fr om...