Samsung CLP 310 User Manual

							Sharing the Printer Locally
24
4Sharing the Printer 
Locally
You can connect the printer directly to a selected computer, 
which is called “host computer,” on the network. 
The following procedure is for Windows XP. For other Windows 
OS, refer to the corresponding Windows Users Guide or online 
help.
NOTES: 
• Check the Operating System(s) that are compatible with 
your printer. Please refer to the OS Compatibility section of 
Printer Specifications in your Printer User’s Guide.
• If you need to know the exact name of your printer, you can 
check the supplied CD-ROM.
Setting Up a Host Computer
1Start Windows. 
2From the Start menu select Printers and Faxes. 
3Double-click your printer driver icon. 
4From the Printer menu, select Sharing. 
5Check the Share this printer box.
6Fill in the Shared Name field, and then click OK.
Setting Up a Client Computer 
1Right-click the Windows Start button and select Explore.
2Select My Network Places  and then right-click Search 
for Computers
.
3Fill in the IP address of host computer in Computer name 
field, and click 
Search. (In case host computer requires 
User name and Password, fill in User ID and password 
of host computer account.)
4Double-click Printers and Faxes.
5Right-click printer driver icon, select Connect.
6Click Yes, if the installation confirm message appears.
Downloaded From ManualsPrinter.com Manuals 
						

							Using Smart Panel
25
5Using Smart Panel
Smart Panel is a program that monitors and informs you of the 
status of the printer, and allows you to customize the printer’s 
settings. If you are a Windows or Macintosh OS user, Smart 
Panel is installed automatically when you install the printer 
software. If you are a Linux OS user, download Smart Panel 
from the Samsung website (www.samsung.com/printer) and 
install.
NOTES:
• To use this program, you need:
- To check for Operating System(s) that are compatible with 
your printer, refer to Printer Specifications in your Printer 
User’s Guide.
- Mac OS X 10.3 or higher
- Linux. To check for Linux systems that are compatible with 
your printer, refer to Printer Specifications in your Printer 
User’s Guide.
- Internet Explorer version 5.0 or higher for flash animation 
in HTML Help.
• If you need to know the exact name of your printer, you can 
check the supplied CD-ROM.
Understanding Smart Panel
If an error occurs while printing, Smart Panel appears 
automatically, showing the error.
You can also launch Smart Panel manually. Double-click the 
Smart Panel icon on the Windows task bar (in Windows), or 
Notification Area (in Linux). You can also click it on the status 
bar (in Mac OS X).
Double-click this icon in Windows.
Click this icon in Mac OS X.
If you are a Windows user, from the Start menu, select 
Programs or All Programs  → your printer driver name → 
Smart Panel.
NOTES: 
• If you have already installed more than one Samsung 
printer, first select the printer model you want in order to 
use the corresponding Smart Panel. Right-click (in Windows 
or Linux) or click (in Mac OS X) the Smart Panel icon and 
select 
your printer name.
• The Smart Panel window and its contents shown in this 
Software User’s Guide may differ depending on the printer or 
Operating System in use.
The Smart Panel program displays the current status of the 
printer, the level of toner remaining in the toner cartridge(s) 
and various other information. You can also change settings.
Toner Level
You can view the level of toner remaining in the toner 
cartridge(s). The printer and the number of toner cartridge(s) 
shown in the above window may differ depending on the printer in 
use. Any printers do not have this feature.
Buy Now
You can order replacement toner cartridge(s) online.
Troubleshooting Guide
You can view Help to solve problems.
Printer Setting
You can configure various printer settings in the Printer Settings 
Utility window. Any printers do not have this feature.
NOTE: If your printer is connected to a network and you are a 
Windows and Mac OS X user, the 
SyncThru Web Service 
window appears instead of the Printer Settings Utility window. 
Linux does not support network environments.
Click this icon in Linux.
1
1
Downloaded From ManualsPrinter.com Manuals 
						

							Using Smart Panel
26
Driver Setting (Only for Windows)
You can use the printer properties window, which allows you to 
access all of the printer options you need for using your 
printer.
 For details, See “Printer Settings” on page 14.
Opening the Troubleshooting 
Guide
Using the troubleshooting guide, you can view solutions for 
error status problems.
Right-click (in Windows or Linux) or click (in Mac OS X) the 
Smart Panel icon and select 
Troubleshooting Guide.
Using Printer Settings Utility
Using the Printer Settings Utility, you can configure and check 
print settings. 
1Right-click (in Windows or Linux) or click (in Mac OS X) the 
Smart Panel icon and select 
Printer Setting.
2Change the settings. 
3To send the changes to the printer, click the Apply button.
NOTES: If your printer is connected to a network, the 
SyncThru Web Service window appears instead of the 
Printer Settings Utility window.
Using Onscreen Help File
For more information about Printer Settings Utility, click   . 
Changing the Smart Panel 
Program Settings
Right-click (in Windows or Linux) or click (in Mac OS X) the 
Smart Panel icon and select 
Options. Select the settings you 
want from the 
Options window.
Downloaded From ManualsPrinter.com Manuals 
						

							Using Your Printer in Linux
27
6Using Your Printer in 
Linux 
You can use your machine in a Linux environment. 
This chapter includes:
• Getting Started
• Installing the Unified Linux Driver
• Using SetIP program
• Using the Unified Driver Configurator
• Configuring Printer Properties
• Printing a Document
Getting Started
You need to download Linux software package from the 
Samsung website (www.samsung.com/printer) to install the 
printer softwares. 
After the driver is installed on your Linux system, the driver 
package allows you to monitor a number of machine devices via 
fast ECP parallel ports and USB simultaneously. 
The Unified Linux Driver package is supplied with a smart and 
flexible installation program. You dont need to search for 
additional components that might be necessary for the Unified 
Linux Driver software: all required packages will be carried onto 
your system and installed automatically; this is possible on a 
wide set of the most popular Linux clones.
Installing the Unified Linux 
Driver
Installing the Unified Linux Driver
1Make sure that you connect your machine to your 
computer. Turn both the computer and the machine on.
2When the Administrator Login window appears, type in 
root in the Login field and enter the system password.
NOTE: You must log in as a super user (root) to install the 
printer software. If you are not a super user, ask your system 
administrator.
3From the Samsung website, download and unpack the 
Unified Linux Driver package to your computer.
4Click the   icon at the bottom of the desktop. When the 
Terminal screen appears, type in: 
[root@localhost root]#tar zxf [FilePath]/
UnifiedLinuxDriver.tar.gz[root@localhost root]#cd 
[FilePath]/cdroot/Linux[root@localhost Linux]#./
install.sh
NOTE:  If you do not use the graphical interface and failed to 
install the software, you have to use the driver in the text 
mode. Follow the steps 3 to 4, and then follow the instructions 
on the terminal screen.
5When the welcome screen appears, click Next.
Downloaded From ManualsPrinter.com Manuals 
						

							Using Your Printer in Linux
28
6When the installation is complete, click Finish.
The installation program has added the Unified Driver 
Configurator desktop icon and Samsung Unified Driver 
group to the system menu for your convenience. If you 
have any difficulties, consult the onscreen help that is 
available through your system menu or can otherwise be 
called from the driver package windows applications, 
such as 
Unified Driver Configurator.
NOTE: Installing the driver in the text mode:
• If you do not use the graphical interface or have failed the 
driver installation, you have to use the driver in the text 
mode.
• Follow the step 1 to 3, then type [root@localhost Linux]# ./
install.sh, then follow the instruction on the terminal screen. 
Then the installation completes.
• When you wan to uninstall the driver, follow the installation 
instruction above, but type [root@localhost Linux]# ./
uninstall.sh on the terminal screen.
Uninstalling the Unified Linux Driver
1When the Administrator Login window appears, type in 
root in the Login field and enter the system password.
NOTE: You must log in as a super user (root) to uninstall the 
printer software. If you are not a super user, ask your system 
administrator.
2Click the   icon at the bottom of the desktop. When the 
Terminal screen appears, type in: 
[root@localhost root]#cd /opt/Samsung/mfp/uninstall/
[root@localhost uninstall]#./uninstall.sh
3Click Uninstall.
4Click Next. 
5Click Finish.
Downloaded From ManualsPrinter.com Manuals 
						

							Using Your Printer in Linux
29
Using SetIP program
This program is for the network IP setting using the MAC 
address which is the hardware serial number of the network 
printer card or interface. Especially, it is for the network 
administrator to set several network IPs at the same time. 
You can only use SetIP program when your machine is 
connected to a network.
SetIP program should be automatically installed during the 
printer driver installation.
Starting the program
1Print the machine’s network information report which 
includes your machine’s MAC address.
2Open the /opt/Samsung/mfp/share/utils/.
3Double click the SetIPApplet.html file.
4Click  in the SetIP window to open the TCP/IP 
configuration window.
5Enter the network cards MAC address, IP address, subnet 
mask, default gateway, and then click 
Apply.
NOTE: when you enter the MAC address, enter it without 
colon(:).
6The machine prints the network information. Confirm all 
the settings are correct.
7Close the SetIP program.
Using the Unified Driver 
Configurator
Unified Linux Driver Configurator is a tool primarily intended for 
configuring Printer.
After installing the Unified Linux driver, the Unified Linux Driver 
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver 
Configurator
1Double-click Unified Driver Configurator on the 
desktop.
You can also click the Startup Menu icon and select 
Samsung Unified Driver and then Unified Driver 
Configurator
.
2Press each button on the Modules pane to switch to the 
corresponding configuration window.   
You can use the onscreen help by clicking 
Help.
3After changing the configurations, click Exit to close the 
Unified Driver Configurator.
Printers Configuration button
Ports Configuration button
Downloaded From ManualsPrinter.com Manuals 
						

							Using Your Printer in Linux
30
Printers Configuration
Printers configuration has the two tabs: Printers and Classes. 
Printers Tab
You can see the current system’s printer configuration by 
clicking on the printer icon button on the left side of the Unified 
Driver Configurator window.
You can use the following printer control buttons:
•Refresh: renews the available printers list.
•
Add Printer: allows you to add a new printer.
•
Remove Printer: removes the selected printer.
•
Set as Default: sets the current printer as a default 
printer.
•
Stop/Start: stops/starts the printer.
•
Test: allows you to print a test page to check if the 
machine is working properly.
•
Properties: allows you to view and change the printer 
properties. For details, see page 31.
Shows all of the 
installed printer.
Switches to Printer 
configuration.
Shows the status, 
model name and 
URI of your printer.
Classes Tab
The Classes tab shows a list of available printer classes.
•Refresh : Renews the classes list.
•
Add Class... : Allows you to add a new printer class.
•
Remove Class : Removes the selected printer class.
Ports Configuration
In this window, you can view the list of available ports, check 
the status of each port and release a port that is stalled in busy 
state when its owner is terminated for any reason.
•Refresh : Renews the available ports list.
•
Release port : Releases the selected port.
Shows the status of the 
class and the number of 
printers in the class.
Shows all of the 
printer classes.
Switches to 
ports 
configuration.
Shows the port type, 
device connected to 
the port and status
Shows all of the 
available ports.
Downloaded From ManualsPrinter.com Manuals 
						

							Using Your Printer in Linux
31
Configuring Printer Properties
Using the properties window provided by the Printers 
configuration, you can change the various properties for your 
machine as a printer.
1Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
2Select your machine on the available printers list and click 
Properties.
3The Printer Properties window opens.
The following five tabs display at the top of the window:
•
General: allows you to change the printer location and 
name. The name entered in this tab displays on the 
printer list in Printers configuration.
•
Connection: allows you to view or select another port. If 
you change the printer port from USB to parallel or vice 
versa while in use, you must re-configure the printer port 
in this tab.
•
Driver: allows you to view or select another printer 
driver. By clicking 
Options, you can set the default 
device options.
•
Jobs: shows the list of print jobs. Click Cancel job to 
cancel the selected job and select the 
Show completed 
jobs
 check box to see previous jobs on the job list.
•
Classes: shows the class that your printer is in. Click 
Add to Class to add your printer to a specific class or 
click 
Remove from Class to remove the printer from the 
selected class.
4Click OK to apply the changes and close the Printer 
Properties Window.
Printing a Document
Printing from Applications
There are a lot of Linux applications that you are allowed to 
print from using Common UNIX Printing System (CUPS). You 
can print on your machine from any such application.
1From the application you are using, select Print from the 
File menu.
2Select Print directly using lpr.
3In the LPR GUI window, select the model name of your 
machine from the Printer list and click 
Properties.
4Change the printer and print job properties.
Click.
Downloaded From ManualsPrinter.com Manuals 
						

							Using Your Printer in Linux
32
The following four tabs display at the top of the window.
•
General - allows you to change the paper size, the paper 
type, and the orientation of the documents, enables the 
duplex feature, adds start and end banners, and changes 
the number of pages per sheet.
•
Text - allows you to specify the page margins and set the 
text options, such as spacing or columns.
•
Graphics - allows you to set image options that are used 
when printing images/files, such as color options, image 
size, or image position.
•
Device: allows you to set the print resolution, paper 
source, and destination.
5Click Apply to apply the changes and close the Properties 
window. 
6Click OK in the LPR GUI window to start printing.
7The Printing window appears, allowing you to monitor the 
status of your print job.
To abort the current job, click 
Cancel.
Printing Files
You can print many different types of files on the Samsung 
machine device using the standard CUPS way - directly from 
the command line interface. The CUPS lpr utility allows you do 
that. But the drivers package replaces the standard lpr tool by 
a much more user-friendly LPR GUI program.
To print any document file:
1Ty p e  lpr  from the Linux shell command 
line and press 
Enter. The LPR GUI window appears.
When you type only 
lpr and press Enter, the Select 
file(s) to print window appears first. Just select any files 
you want to print and click 
Open. 
2In the LPR GUI window, select your printer from the list, 
and change the printer and print job properties.
For details about the properties window, see page 31.
3Click OK to start printing.
Downloaded From ManualsPrinter.com Manuals 
						

							Using Your Printer with a Macintosh
33
7Using Your Printer with 
a Macintosh
Your printer supports Macintosh systems with a built-in USB 
interface or 10/100 Base-TX network interface card. When you 
print a file from a Macintosh computer, you can use the CUPS driver 
by installing the PPD file. 
NOTE: Some printers do not support a network 
interface. Make sure that your printer supports a 
network interface by referring to Printer Specifications 
in your Printer User’s Guide.
This chapter includes:
• Installing Software
• Using SetIP program
• Setting Up the Printer
•Printing
Installing Software
The CD-ROM that came with your printer provides you with the 
PPD file that allows you to use the CUPS driver or Apple 
LaserWriter driver 
(only available when you use a printer 
which supports the PostScript driver)
, for printing on a 
Macintosh computer. 
Printer driver
Installing the Printer driver
1Make sure that you connect your printer to the computer. 
Turn on your computer and printer.
2Insert the CD-ROM which came with your printer into the 
CD-ROM drive.
3Double-click CD-ROM icon that appears on your 
Macintosh desktop.
4Double-click the MAC_Installer folder.
5Double-click the MAC_Printer folder.
6Double-click the Samsung SPLC Installer icon.
7Enter the password and click OK.
8The Samsung SPL Installer window opens. Click Continue 
and then click Continue.
9Select Easy Install and click Install.
10After the installation is finished, click Quit.
Uninstalling the Printer driver
Uninstall is required if you are upgrading the software, or if 
installation fails.
1Insert the CD-ROM which came with your printer into the 
CD-ROM drive.
2Double-click CD-ROM icon that appears on your 
Macintosh desktop.
3Double-click the MAC_Installer folder.
4Double-click the MAC_Printer folder.
5Double-click the Samsung SPLC Installer icon.
6Enter the password and click OK.
7The Samsung SPL Installer window opens. Click Continue 
and then click Continue.
8Select Uninstall and then click Uninstall.
9When the uninstallation is done, click Quit.
Downloaded From ManualsPrinter.com Manuals