Samsung CLP 310 User Manual

Getting started_21
SYSTEM REQUIREMENTS
Before you begin, ensure that your system meets the following 
requirements:
Windows
Your machine supports the following Windows operating systems.
Macintosh
Linu
x
SETTING UP THE NETWORK
You need to set up the network protocols on the machine (;printer) to use it 
in the network environment. If you use your machine in the wired network, 
refer to Using a wired network. If you use your network printer in the 
wireless network, refer to Using a wireless...

22 _Getting started
Supported operation environments
The following table shows the network environments supported by the 
machine:
USING A WIRED NETWORK
You must set up the network protocols on your printer to use it on your 
network.  This chapter will show you how this is easily accomplished.
Printing Configuration report
You can print a Network Configuration Report from the machines control 
panel that will show the current machine’s network settings. This will help 
you to set up a network and...

Getting started_23
5.Enter the machine’s new information into the configuration window 
as follows:
•MAC Address : Find the machine’s MAC address from the Network 
Configuration Report and enter it without the colons.
For example, 00:15:99:29:51:A8 becomes 0015992951A8. 
•IP Address: Enter a new IP address for your printer the same as the 
computer’s IP address except for the last number.
For example, if your computer’s IP address is 192.168.1.150, enter 
192.168.1.X. (X is number between 1 and 254 other...

24 _Getting started
Before starting, please locate the USB cable and the Printer Software 
Installation CD-ROM provided with your machine (;printer).
You may need to contact a network administrator or the person who has set 
up your wireless network for information regarding the configuration.
Checking your network environments 
IP address
Every device in a network is identified by a unique numerical address 
called an IP Address. Your machine came with a default IP address of 
192.0.0.192, and you can...

Getting started_25
If the IP address assignment method is Static, check if Static is 
shown in the window. However, if it shows DHCP, click Change 
TCP/IP to enter the IP address and other network configuration 
values for the printer. Before entering the IP address for the printer, 
you must know the computerís network configuration information. If 
the wireless computer is set to DHCP, you must contact the network 
administrator to get the static IP address.
Example)
If computer’s network information...

26 _Getting started
Example)
If computer’s network information is as below:
IP address:   169.254.133.42
Subnet Mask:  255.255.0.0
Printer’s network information should be as below:
IP address: 169.254.133. 43 (Use computer’s IP address, with 
changed last three digits.)
Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
Gateway: 169.254.133.1 (Change the last three digits from IP 
address of your printer to 1.)
10.The wireless network is connecting according to the network 
configuration.
11.When...

Getting started_27
assignment, or you are required to set a static IP, proceed to the 
Setting IP address part before going to Configuring the 
machine’s wireless network part after reviewing the following parts 
on printing a Network Configuration Report. 
•Ad-hoc mode : An Ad-hoc mode network provides peer to peer 
communication. In an Ad-hoc mode network, wireless devices and 
computers communicate directly with each other, without using an 
access point. They can share files and machines, but may not...

28 _Getting started
5.Enter the machine’s new information into the configuration window 
as follows:
•MAC Address : Find the machine’s MAC address from the Network 
Configuration Report and enter it without the colons.
For example, 00:15:99:29:51:A8 becomes 0015992951A8. 
•IP Address: Enter a new IP address for your printer the same as the 
computer’s IP address except for the last number.
For example, if your computer’s IP address is 192.168.1.150, enter 
192.168.1.X. (X is number between 1 and 254...

Getting started_29
3.Click Wireless and Select Wizard. Then, click Next.
4.Select the one 
Network Name(SSID) in the list.
•
SSID: SSID(Service Set Identifier) is a name that identifies a wireless 
network. Access points and wireless devices attempting to connect 
to a specific wireless network must use the same SSID. The SSID is 
case-sensitive.
•
Operation Mode: Operation Mode refers to the type of wireless 
connections.
- 
Ad-hoc: allows wireless devices to communicate directly with each 
other in a...

30 _Getting started
• If the installation window does not appear, click Start > Run. Type 
X:\Setup.exe, replacing “X” with the letter which represents your 
drive and click OK. 
• If you use Windows Vista, Windows 7 and Windows Server 2008 R2, 
click Start > All Programs > Accessories > Run, and type 
X:\Setup.exe.
3.Select Typical installation for a network printer, and then click Next.
4.The list of machines available on the network appears. Select the printer 
you want to install from the list and...