Samsung Camera Wb 350 F Manual

Wireless network  120
Saving files to a smart phone automatically
The camera connects to a smart phone that supports the AutoShare feature via a WLAN. When you capture a photo with your camera, the photo is saved to the smart phone 
automatically.
‡The AutoShare feature is supported by smart phones or tablets running Android OS or iOS. Some features may not be supported by some models. Before using this feature, update 
the device’s firmware to the latest version. If the firmware version is not the most...

Wireless network  121
Sending photos or videos to a smart phone
The camera connects to a smart phone that supports the MobileLink feature via a WLAN. You can easily send photos or videos to your smart phone.
‡The MobileLink feature is supported by smart phones or tablets running Android OS or iOS. Some features may not be supported by some models. Before using this feature, update 
the device’s firmware to the latest version. If the firmware version is not the most recent, this function may not perform...

Sending photos or videos to a smart phone
Wireless network  122
6 On the camera, allow the smart phone to connect to your camera.
‡If the smart phone has been connected to your camera before, it is connected 
automatically.
‡If you select Select Files from Camera (Connect to multiple smartphones), 
touch Connect next to the smart phone listed on the camera. 
7 To connect to multiple smart phones, repeat steps 4, 5 and 6, and 
then touch Next .
8 On the smart phone or camera, select files to transfer...

Wireless network  123
1 On the camera, rotate the mode dial to w.
2 On the camera, select .
‡If the pop-up message that prompts you to download the application 
appears, select Next.
‡To require PIN verification when connecting the smart phone to the camera, 
select Security Settings . (p. 143)
3 On the smart phone, turn on Samsung SMART CAMERA App.
‡For iOS devices, turn on the Wi-Fi feature before turning on the application.
‡To start the application automatically on an NFC-enabled smart phone,...

Using a smart phone as a remote shutter release
Wireless network  124
7 On the smart phone, touch and hold  to focus.
‡The focus is automatically set to Multi AF.
8 Release  to capture the photo.
‡The photo will be stored on the smart phone in its original size. 
‡If the GPS feature is activated on the smart phone, the GPS information will 
be saved with the captured photo.
‡When you use this feature, the ideal distance between the camera and the smart 
phone may vary, depending on your...

Wireless network  125
Using the Baby Monitor
Use the Baby Monitor feature to connect the camera to a smart phone and monitor a location.
‡The Baby Monitor feature is supported by smart phones that support WVGA (800 X 480) or higher resolution and run the Android OS or iOS. Some features may not be supported by 
some models. Before using this feature, update the device’s firmware to the latest version. If the firmware version is not the most recent, this function may not perform properly. 
‡You should...

Using the Baby Monitor
Wireless network  126
Adjusting the noise level for alarm activation
You can set the level of noise that will activate an alarm while using sound 
monitoring. Press [
D/c] to adjust the noise level.
Noise level for alarm  activation:
When the camera  detects noise 
that exceeds the 
designated level for a 
short period, an alarm  will sound.
▲▼: Sensor sensitivity
Do not use this feature for illegal purposes. 

Wireless network  127
Using Auto Backup to send photos or videos
You can send photos or videos that you captured with the camera to a PC wirelessly.
Sending photos or videos to a PC
1 Rotate the mode dial to w.
2 Select .
‡If the pop-up message that prompts you to download the application 
appears, select Next.
‡The camera will automatically attempt to connect to a WLAN via the most 
recently connected AP device. 
‡If the camera has not previously been connected to a WLAN, it will search for...

Using Auto Backup to send photos or videos
Wireless network  128
3 Select a backup PC.
4 Select OK.
‡To cancel sending, select Cancel.
‡You cannot select individual files to back up. This function backs up only new 
files on the camera.
‡The backup's progress will be shown on both the PC monitor and the camera 
screen.
‡When the transfer is completed, the camera will turn off automatically in 
approximately 30 seconds. Select Cancel to return to the previous screen and 
prevent the camera from...

Wireless network  129
Changing email settings
In the email menu, you can change settings for storing your information. You can 
also set or change the email password. For information about entering text, refer to 
"Entering text". (p. 118)
Storing your information
1 Rotate the mode dial to w.
2 Select .
3 Press [m].
4 Select Sender Setting.
5 Select the Name box, enter your name, and then select Done.
Sender Setting
Name
Email
Save Reset
6 Select the Email box, enter your email address, and then...