Samsung A800b User Manual

2. Click on [Settings] tab and set the  by referring to  described in  the display mode 
table supported  by this projector. 
You do not have to change  setup.
3. Press the [Advanced] button.  Another property window will appear.
4. Click on [Monitor] tab and set  the  by 
referring to  described in  the display mode 
table supported  by this projector.  
Set up both the vertical and hor izontal frequency instead of 
.
5. Click the [OK] button to close the window, and click the  [OK] button of the...

 
 
 to “Video” mode using the [VIDEO
] buttons or check whether your PC is connected correctly.
When connecting the projector to  PC, check that PC setup complies to display settings supported by this projector. 
If not, there may  be signal problems.
 
 
 |  Basic Settings | Connecting the Power | Connecting to video equipment | 
 
 
 
  
 
  
 
   
1. Rear of Projector 
  
Plug the power cord in
to the power terminal on the rear side of the projector. 
 
 
 
 
 |  Basic Settings | Connecting the Power...

 
 
 
Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of video equipment using the 
video cable. 
- If the video equipment has S-VIDEO OUT port, connect it to [S -VIDEO IN] input port of the projector.
Using the S-VIDEO connection, provides a higher visual quality.
When finishing connecting the de vices, connect the power of the projector and the VCR. 
    Using the Projector   
  Turn on the projector and press  the [Video] button to select . 
 
Connect the...

 
 
 
Connect the [COMPONENT IN 1 (Y/PB/ PR)] or [COMPONENT IN 2 (Y/PB/ PR)] input port at the back of the projector to 
the Component port at the back of the DVD with the component ca ble. 
When the connection is finished, connect the power of your projector and DVD (or the device connected to the digital 
output terminal).  
   Using the Projector   
  Turn on the projector and press the [COMP1] button to select . 
 
Press the [COMP2] button to select  if [COMPONENT  IN 2] is connected. 
When Component...

 
 
 
Connect antenna cable to antenna signal input terminal of the receiver. 
Connect the COMPONENT 1 [COMPONENT IN 1 (Y/PB/ PR)] or [COMPONENT IN 2 (Y/PB/ PR)] input port at the back of 
the projector to the Component po rt at the back of the digital broadcast receiver with the component cable.  
- If the digital broadcast receiver provides a PC output port,  you can connect a digital broadcast receiver using the [PC 
IN] input port of the projector. 
When finish connecting the devic es, connect the...

 
 
 
Connect [PC IN] port on the rear side of the projector to the monitor output port of PC using PC video cable. 
When connections are all comple ted, connect both power codes of  the projector and the PC.
This product supports plug and play and therefore, if you use Window XP you do not need to setup the driver 
on your PC.
    Using the Projector   
  Turn on the projector and press  the [PC] button to select . 
If PC Mode is not available, che ck PC video cable is in place. 
 
Turn on the PC and...

 
 
 
- Connecting using a HDMI/DVI cable 
Connect the [HDMI 1/DVI IN] terminal on the back of the projector and the DVI output terminal of the digital output 
device using a HDMI/DVI cable.
- Connecting using a HDMI cable
Connect the [HDMI 1/DVI IN] or [HDMI IN 2] terminal on the back  of the projector and the HDMI outpu t terminal of the 
digital output device using a HDMI cable. 
When the connection is finished, connect the power of your proj ector and DVD (or the device connected to the digital...

 
 
 |  Input | Picture | Setup | Option | 
 
 
 
 
* Click the Play( )/Stop( ) button in the table below to view the  video file. 
Screen 
Adjustment  Description  Play/Stop 
Source List  You can select a device connecte d to the projector to display. 
  1) Component 1  5) PC 
2) Component 2   6) HDMI 1 
3) S-Video  7) HDMI 2
4) Video   
Edit NameYou can edit the names of device s connected to the projector. 
  1) Component 1  5) PC 
2) Component 2   6) HDMI 1 
3) S-Video  7) HDMI 2
4) Video   
 
 
 
|...

* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment  Description  Play/Stop 
Mode Select a screen state which is customized to your projector or  change the screen mode 
as required. 
 
1) Mode
  - Dynamic   
Select this if you want the screen quality to be clearer than s tandard screen 
quality. 
  -Standard  
You can comfortably view the pro jection screen if the surrounding is somewhat 
bright. 
  - Movie1, Movie2   
Select this if your surroundings  are...

2) R-Gain  6) G-Offset 
3) G-Gain  7) B-Offset 
4) B-Gain     
 
8) Gamma  : An image compensation function  that controls the settings according to the 
video properties. 
 
  -Film  : Picture Adjustment Film gamma.
  -Video  : The Gamma mode normal that matches a TV screen.
  -Graphic  : The Gamma mode that matches a PC screen.
 
Gamma
  9) DynamicBlack™  : Adjusts the brightne ss and contrast of the screen by adjustin g the 
tightening thread in the optical system. 
 
  -Off  : You can view the screen...