Samsung 460ut-b Manual

If the connection is established via Ethernet, enter the IP that was entered for the display 
device. 

Main Screen Layout
 Menu BarChange the status of a display device or the properties of the program.
 Device CategoryView a list of connected display devices or device groups.
 Schedule CategoryView a list of schedules for display devices.
 Set ListSelect the display device you want to adjust.
 Modify the Set ListAdd, edit, regroup or delete sets.
 Help TopicsDisplay help topics for the program.
4
3
2
16
5
1
2
3
4
5
6 

Menus
You can power on or off a selected device or change the input source or volume of the device.
Choose display devices from the list of sets, and select the Home tab. 
 Home
Select an item and change the corresponding setting.
Power
On: Power on a selected display.
Off: Power off a selected dis
Input
Input Source : Change the input source.
 Input sources available can vary depending on the Display Device Models.
The input source can be changed only for displays that are turned on. 
Channel :...

This menu shows a list of display devices which have following errors - fan error, temperature 
error, brightness sensor error, or lamp error.
Select a display device from the list. The Repair button will be enabled. Click the refresh button 
to refresh the error status of the display device. The recovered display device will disappear 
from the Fault Device List. 
Fault Device Alert
Display device in which error is detected will be reported by email.
Fill in all required fields. The Test and OK...

Screen Adjustment
The screen settings (contrast, brightness, etc.) can be adjusted. 
Choose display devices from the list of sets, and select the Picture tab.
Custom
Select an item and change the corresponding screen setting.
 Color and Tint are not available if the input source is PC.
Red, Green, Blue and PC Screen Adjustment are not available if the input source is Video.
Color, Tint, Color Tone, Color Temp, Red, Green, Blue and PC Screen Adjustment are not 
available if both PC Source and Video...

Options
Dynamic Contrast
Adjust the Dynamic Contrast for the selected display device. 
Gamma Control
Change the gamma value for the selected display. 
Auto Motion Plus
This option is used to view dynamic images.
Off: Disable the Auto Motion Plus function.
Clear: Set the level of Auto Motion Plus to clear. This mode is suitable to display vivid images.
Standard: Set the level of Auto Motion Plus to standard.
Smooth: Set the level of Auto Motion Plus to smooth. This mode is suitable to display smooth...

Size
Picture Size
Adjust the screen size for the selected display device. 
The Detail item will be disabled if Picture Size is set to a mode that does not support detailed 
configuration.
The -/+ buttons can be used to adjust Zoom.
The screen can be relocated using the up/down/left/right buttons.
Detail
You can view details of the selected screen size.
PC Screen Adjustment
Frequency adjustment or fine-tuning is available by using the -/+ buttons in Coarse or Fine.
To relocate the screen, click one of the...

Sound Adjustment
You can change the sound settings. 
Choose display devices from the list of sets, and select the Sound tab.
 The Bass or Treble item will be disabled if the item is not supported by the selected set. 
Bass
Adjust the bass for the selected display. 
Treble
Adjust the treble for the selected display. 
Balance (L/R)
Adjust the volume of the left and right speakers of the selected display device. 
SRS TS XT
Enable or disable the SRS TS XT effect for the selected display device.  

System Setup
Choose display devices from the list of sets, and select the System tab. 
Video Wall
The Video Wall  function can be used to display part of a whole  picture or repeat the same picture on 
each of connected  multiple display devices.
 Video Wall is enabled only when devices are in the group. 
Video Wall
Enable or disable Video Wall .
Format
Select the format to display the split screen.
VMM






























/BUVSBM 

H
Select the number of horizontal display devices.
A maximum of 15 displays can be arranged in a row.
 A maximum of 6 can be assigned to V if 15 is assigned to H. 
V
Select the number of vertical display devices. 
A maximum of 15 displays can be arranged in a row.
 A maximum of 6 can be assigned to V if 15 is assigned to H. 
Screen Position
View the layout of displays (configured by the screen divider) or change the layout as required.
Screen Position and Preview are enabled when Video Wall is set to on....