Home > Sahara > Projector > Sahara Projector Protector Specifications

Sahara Projector Protector Specifications

    Download as PDF Print this page Share this page

    Have a look at the manual Sahara Projector Protector Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 9 Sahara manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Williams House, Hailey Road, Erith, Kent, DA18 4AA  SAHARA PRESENTATION SYSTEMS PLC www.saharaplc.com 
    The Sahara Protector is the UK’s first totally secure projector and 
    represents the ultimate in theft deterrent projection technology
    . 
     
    The concept is stunningly simple. Familiar with car stereo front panels which can be easily 
    removed when the car is parked? Well, Sahara has done the same for the Protector. After the 
    initial set up the panel is removed and taken away from the classroom where the projector 
    remains installed, working perfectly via the remote control.  When not in use, the remote control 
    is used to shut down the Protector, de-activating the lamp and projector engine. With the 
    Protector now in standby, the power source remains constant ensuring the projector stays 
    completely enabled. 
     
    The projector is only disarmed when the power is interrupted, either by the plug being removed 
    from the socket, or switched off at the mains. If this happens the Protector will not re-boot until 
    the operating panel  has been replaced. Each projector has a unique serial coded panel and will 
    recognise only that. Replace it with an unauthorised panel and the projector will not work.  
    Therefore, should a thief obtain a panel, they will not be able to re-boot any machine but its 
    manufactured partner.  Should the panel genuinely go missing, Sahara will be able to match the 
    projector to the panel by the serial number and supply a replacement panel within a short time. 
      
    The Protector comes in Bright Orange especially aimed at the educational market (although it is 
    available in silver) to clearly advertise its unique security status.  The body of the projector is 
    also clearly labelled with a message that this projector will not work once removed from the 
    power source and without the panel. Window stickers are also supplied with every machine to 
    show that the projector inside is protected with the hope that the more these projectors are 
    installed into classrooms, the more word will spread that it is pointless stealing a Protector as it 
    has effectively no sell-on value without its corresponding security panel. 
     
    Sahara is also able to offer any school the opportunity to personalise the start-up screen.  Once 
    burned in, the only way to change the screen is for it to be returned to Sahara for the change.  
    Sahara anticipates this can be done at a small cost per machine, and this will be offered at the 
    time of purchase. 
    Removable security 
    panel flips out easily 
    Full control via  
    infrared remote 
    Each security panel has 
    a unique serial code 
    Silver option available 
    Window stickers deter 
    potential thieves  
    						
    							Williams House, Hailey Road, Erith, Kent, DA18 4AA  SAHARA PRESENTATION SYSTEMS PLC www.saharaplc.com 
    Panel  TI DMD 0.55-inch, 12 deg. DDR   Vertical Scan Rate  50-85Hz 
     XGA (1024x768)  Projection Position  Front/Rear, Table/Ceiling 
      HDTV Compatibility  480P, 480i, 720P, 1080i   Lamp  200W 
    Data Compatibility  VGA, SVGA, XGA, SXGA  Audio Noise  
    						
    All Sahara manuals Comments (0)

    Related Manuals for Sahara Projector Protector Specifications