Safari Arms 45 Automatic Pistol Instructions Manual
Have a look at the manual Safari Arms 45 Automatic Pistol Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1 Safari Arms manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
MATCHMASTER
\I
7
II
\spring tension, DO NOT point the front of\\-1 ‘\\ \the pistol at your face or someone else’s face\\\\$ during disassembly and reassembly.\
Depress the recoil spring ca p - using the](http://img.usermanuals.tech/thumb/5847/93415/w64_safari_45_d-25.png "Page 26
MATCHMASTER
\I
7
II
\spring tension, DO NOT point the front of\\-1 ‘\\ \the pistol at your face or someone else’s face\\\\$ during disassembly and reassembly.\
Depress the recoil spring ca p - using the")
![Page 30
With the pistol braced firmly on a padded surface (a carpet scrap works\
nice-
*--\C-,./Q.,,/0\keeping the barrel bushing ready, About this time you’ll wish you had\
a third,I\I
I I
I#lIII#-.1fI/\I0/IIUse the base of a magazine or a barrel bushing wrench to compress the re\
coil
\Insert the barrel bushing and twist clock-
- _
-](http://img.usermanuals.tech/thumb/5847/93415/w64_safari_45_d-29.png "Page 30
With the pistol braced firmly on a padded surface (a carpet scrap works\
nice-
*--\C-,./Q.,,/0\keeping the barrel bushing ready, About this time you’ll wish you had\
a third,I\I
I I
I#lIII#-.1fI/\I0/IIUse the base of a magazine or a barrel bushing wrench to compress the re\
coil
\Insert the barrel bushing and twist clock-
- _
-")
![Page 36
ENFORCER andTAKEDOWN NOTCHIII
Y\](http://img.usermanuals.tech/thumb/5847/93415/w64_safari_45_d-35.png "Page 36
ENFORCER andTAKEDOWN NOTCHIII
Y\")
BIG DEUCE and -it can be started by pressing on the end that pro-
Ease the slide forward into battery.t0#8l LI llalmalI8. Then twist the barrel bushing I Bl\w \Remove recoil spring cap. Flip the barrel link f(toward muzzle) and remove barrel
Big Deuce Reassembly stop shaft,and then Press in the barrel bushing
rotate the slide stop upward until it aligns with the disassembly notch. Be careful not to mar the finish on your pistol. The slide will move easily for alignment. Move the slide to the rear until the slide stop lines up with the slide stop notch. Then depress the slide stop and ease the slide forward into bat- tery. Lower the hammer.Your pistol is ready for loading.
ment. Move the slide to the rear until the slide stop linesup with the slide stop notch. Then depress the slide stop and ease the slide forward into battery. Lower the hammer. Your Enforcer or Cohort is ready for loading.