Runco Vx3000i Ultra Operation Manual

Table of Contents
VX-3000 Installation/Operation Manual xi 
PREL
IMINARY
Lamp Replacement  .................................................................................................... 73
Troubleshooting Tips  .................................................................................................. 74
6.Serial Communications ........................................................................................... 77
RS-232 Connection and Port Configuration...

Table of Contents
xii VX-3000 Installation/Operation Manual
PREL
IMINARY
Downloaded From projector-manual.com Runco Manuals 

VX-3000 Installation/Operation Manual xiii 
1List of Figures
PREL
IMINARY
2-1. VX-3000 Front/Side/Top View ...................................................................................... 5
2-2. VX-3000 Rear/Bottom/Side View ................................................................................. 7
2-3. VX-3000 Rear Panel ..................................................................................................... 8
2-4. VX-3000 Remote Control...

List of Figures
xiv VX-3000 Installation/Operation Manual
PREL
IMINARY
4-6. Keystone Correction ................................................................................................... 64
4-7. Pincushion Correction ................................................................................................ 65
4-8. Gain and Offset .......................................................................................................... 69
4-9. CIE 1931 Chromaticity Diagram...

VX-3000 Installation/Operation Manual 1 
PREL
IMINARY
1.1 
About This Manual
This Owner’s Manual describes how to install, set up and operate a Runco VX-3000 
DLP™ Home Theater Projector.
Target AudienceRunco has prepared this manual to help home theater installers and end users get the 
most out of the VX-3000. 
Runco has made every effort to ensure that this manual is accurate as of the date it was 
printed. However, because of ongoing product improvements and customer feedback, it 
may require...

Introduction
2 VX-3000 Installation/Operation Manual
PREL
IMINARY
Graphic Conventions: These symbols appear in numerous places throughout the 
manual, to emphasize points that you must keep in mind to avoid problems with your 
equipment or injury: 
1.2 
Using This Manual
Use the following table to locate the specific information you need in this manual. 
TIPS highlight time-saving short cuts and helpful guidelines for using 
certain features. 
NOTES emphasize text with unusual importance or special...

Introduction
VX-3000 Installation/Operation Manual 3 
PREL
IMINARY
1.3 
Description, Features 
and Benefits
The VX-3000 Home Theater Projector offer the astounding picture quality and versatility 
heretofore associated with more expensive projectors. Its 1920
 x 1080, native-resolution 
DLP light engine features Runco's powerful SuperOnyx™ technology for bright, pristine 
high-definition (1080p) images.
Contrast ratio and dynamic range extend to new heights with Runco's exclusive 
Reflectance...

Introduction
4 VX-3000 Installation/Operation Manual
PREL
IMINARY
Key Features and BenefitsThe VX-3000 offers these key features and benefits: 
• Native Resolution: 1920 x 1080 (16:9 Native Aspect Ratio) 
• DLP system using SuperOnyx™ Digital Micromirror Device (DMD)
• 6-segment color wheel produces wide dynamic range and rich grayscale
• Picture in Picture function allows you to display two inputs on the screen at the same 
time
• Two (2) HDMI Inputs with High-bandwidth Digital Content Protection...

VX-3000 Installation/Operation Manual 5 
PREL
IMINARY
2.1 
VX-3000 at a Glance
Figure 2-1 and Figure 2-2 show the key VX-3000 components. 
Figure 2-1. VX-3000 Front/Side/Top View
1.EXHAUST VENT
2.ZOOM TAB (Standard VX-3000)  
Use this to change the projected image size with a standard VX-3000.
3.TOP IR SENSOR
2. Controls and Functions
12 3
4 5
678910
Downloaded From projector-manual.com Runco Manuals 

Controls and Functions
6 VX-3000 Installation/Operation Manual
PREL
IMINARY
4.TEMP LED 
Indicates fan status and internal temperature as follows:
• Off during normal operation
• Red when internal temperature is too high or a fan failure occurs
5.INTAKE VENT
6.POWER/STANDBY LED 
Indicates power status as follows:
• Orange when the projector is in standby mode
• Flashes green for approximately 45 seconds after the projector is turned on to 
indicate that the lamp is warming up
• Green during normal...