Runco Vx 60d Projector User Manual
Have a look at the manual Runco Vx 60d Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 123 Runco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
103Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual Optional Input Modules APPENDIX D There are many optional input modules and accessories currently available for this projector. Contact your dealer for a complete and up-to-date listing. The RGB500 Input Module may be installed in this projector, a Marquee Signal Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input signals from computers or other RGB source devices. RGB500 Features • accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or separate horizontal and vertical sync), up to 500 MHz bandwidth • accepts YPbPr, composite (on green) and Y/C (on red/blue) • BNC connectors for RGB signal inputs NOTE: The audio connectors are not functional. The RGB400 Buffered Amplifier Input Module may be installed in this projector, in a Marquee Signal Switcher or in a Marquee Case/Power Supply. Connect three-, four-, or five-wire RGB video signals of up to 400 MHz bandwidth, signals typically produced by high-resolution computer or workstations. The buffering capability of the module enables the incoming signal to be sent to a remote destination. Inputs are 75 Ω terminated. RGB400BA Features • accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or separate horizontal and vertical sync) • accepts YPbPr, composite (on green) and Y/C (on red/blue) • BNC connectors for RGB signal inputs • Buffered signals to a remote destination NOTE: The audio connectors are not functional. ➤ RGB500 Input Module ➤ RGB400BA Input Module
104Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual Appendix D: Optional Input Modules The RGB400 ALT Input Module may be installed in this projector, a Marquee Signal Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input signals from computers or other RGB source devices. Video inputs are 75 Ω terminated. Video outputs provide buffered loop-through to another display device. RGB400ALT Features • accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or separate horizontal and vertical sync) • accepts YPbPr, composite (on green) and Y/C (on red/blue) • BNC connectors for RGB signal inputs • buffered loop-through video outputs NOTE: The audio connectors are not functional. The PC250 Analog Input Module may be installed in this projector, a Marquee Signal Switcher or a Marquee Case/Power Supply. The module receives analog RGB input signals from IBM PC compatibles or Macintosh computers. Video inputs are 75 Ω terminated. Video outputs are provided for buffered loop-through to another display device. PC250 Analog Features • accepts VGA or MAC RGB video • 15 pin D connectors for video • active loop-through video outputs NOTES: 1) This interface does not accept VGA and MAC signals simultaneously . 2) The audio connectors are not functional. 3) Trademarks are the rights of their respective owners. RGB400 Active Loop-Thru ➤ Input Module PC250 Analog Input Module ➤
105Runco VX-40d/-50d/-60d/-80d Owner’s Operating ManualAppendix D: Optional Input Modules The module receives either composite video or S-video input signals from tape or disk players (do not connect both types of signals simultaneously). Video inputs are 75 Ω terminated. Video outputs are provided for buffered loop-through to another display device. Composite/S-video Features • BNC connectors for composite RGB signals • 4-pin mini-DIN connectors for S-Video signals • buffered loop-through video outputs NOTES: 1) This interface is not a decoder. NTSC, PAL, or SECAM signals must connect to the video decoder installed at INPUT 3 / INPUT 4. 2) The audio connectors are not functional. 3) Do not connect both composite video and S-video signals to the Composite / S- Video Input Module. Connect one or the other, even when plugged into a switcher. This module can display digital video input signals conforming to the DVI (Digital Visual Interface) single-channel standard. Features • supports Digital Visual Interface (DVI) single-channel • supports VESA ® Extended Display Identification Data (EDID™) • provides an active-loop-through using a DVI connector (conforming to the DVI Specification) ➤ Composite / S-Video Input Module ➤ DVI Input Module
106Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual Appendix D: Optional Input Modules The module accepts a serial digital 4:2:2 component video signal (YCbCr) via a single SERIAL IN BNC connector. The signal can loop through the SERIAL OUT BNC connector to another device (such as another projector). Inputs are 75 Ω Terminated. SDI Features • accepts serial digital 4:2:2 component video (YCbCr) • provides both a SERIAL IN and a SERIAL OUT BNC connector includes status LEDs for signal and error • SMPTE 259M compatible The Dual SD/HD-SDI Module enables incoming serial digital (SD or HD) data to be tiled across multiple screen displays, overlapped for extra-bright displays, or distributed to additional projectors for multiple, same-image screens. Dual SD/HD-SDI Features • Accepts and decodes up to two serial digital inputs • Outputs up to two 10-bit YCbCr 4:2:2 video signals • Provides input(s) to output(s) loop-through capability • Supplies interchangeable inputs as part of the Picture-in Picture display • SMPTE 259M compatible Serial Digital Input Module ➤ Dual SD/HD-SDI Module ➤ Appendix D: Optional Input Modules
R u n c o I n t e r n a t i o n a l • 2 9 0 0 F a b e r S t re e t • U n i o n C i t y, C A 9 4 5 8 7 • P h ( 5 1 0 ) 3 2 4 - 7 7 7 7 / ( 8 0 0 ) 2 3 R U N C O / F a x ( 5 1 0 ) 3 2 4 - 9 3 0 0w w w. r u n c o . c o m RUMA-011010 rev 08-29-05 S E R I A L N U M B ER