Runco Vx 5000d Projector User Manual

9
Projector Description
Input Panel
Top View
Exhaust Vent Vertical 
Lens Shift
Motorized
Focus &
Zoom
Cover Screw
Intake Vents
Power
Lamp
Temp
Vertical Lens Shift:Using the provided
adjustment tool, turn this to move the lens up
and down.
Power:
Led is red when unit is in 
standby, blue when it is in operation.
Lamp:
When the lamp is on, this LED is blue.
When the lamp is off, this LED is off.
T
emp:If the Projector has overheated and
shut down, this will light red.
Int
ake &Bottom Vents:This is where...

10
Ceiling Mount Dimensions
12.241
4.315
10.979
20.870
11.227
Lens Offset from the 
logo side of Projector
5.960
1.015 
Feet Height
8.935
12.5001.645 
Bracket Height
27.804
0
5.858
(3X)
10.846
15.834
(3X)
0
6.500 (2X)
15.000 (2X)
8.796
14.004
10.750 (2X)
26.30411.400 Center of Bracket
Front View
Side View
Bottom View 

11
Horizontal Vertical and Lens Shift
Vertical Lens Shift (Up or Down)
1.0151.645
10.58012.500
10.750
8.796
Base plate to center of lens
Approx. 5-6 (depends on the 
amount of lens shift)
Power
Lamp
Te m p
0%Screen Center
100% Width Lens Shift
(1.0 x W)
50% Width Lens Shift 
(0.5 x W)
150% Width Lens Shift
(1.5 x W)
50% Height
Lens Shift 
(0.5 x H)
100% Height
Lens Shift
(1.0 x H)
150% Height
Lens Shift
(1.5 x H)
Screen Center0%
Screen Width (W)
Horizontal Lens Shift (Left or Right) 

12
Lens Option 1: Throw Distance 1.57 - 1.95x Width of Screen
When only Vertical or only Horizontal Shift is used:
Maximum. Vertical Shift = 90% of screen height (.9 x height)
Maximum Horizontal Shift = 40% of screen width (.4 x width)
Amount of Horizont
al Shift when Vertical is @ maximum:
Maximum Horizontal Shift = 5% of screen width (.05 x width)
Amount of V
ertical Shift when Horizontal is @ maximum:
Maximum Vertical Shift = 10% of screen height (.10 x height)
The maximum shif
t in 2 directions (ex....

13
Lens Option 3: Throw Distance 2.76 - 4.85x Width of Screen
When only Vertical or only Horizontal shift is used:
Maximum Vertical Shift = 95% of screen height (.95 x height)
Maximum Horizontal Shift = 52% of screen width (.52 x width)
Amount of Horizont
al shift when Vertical is @ maximum:
Maximum Horizontal Shift = 7% of screen width (.05 x width)
Amount of V
ertical shift when Horizontal is @ maximum:
Maximum Vertical Shift = 24% of screen height (.24 x height)
The maximum shif
t in 2 directions (ex....

14
Lens Option 6: Throw Distance 0.8 Fixedx Width of Screen
When only Vertical or only Horizontal Shift is used:
Maximum. Vertical Shift = 15% of screen height (.15 x height)
Maximum Horizontal Shift = 10% of screen width (.1 x width)
Amount of Horizont
al Shift when Vertical is @ maximum:
Maximum Horizontal Shift = 5% of screen width (.05 x width)
Amount of V
ertical Shift when Horizontal is @ maximum:
Maximum Vertical Shift = 10% of screen height (.10 x height)
Explanation:
•    0% shift is when the...

15
Use the included 3/16 Hex-head tool to adjust the
Vertical lens shift to center image vertically on
screen. See the chart on page 12 for shift range
available with the installed lens and screen size.
Next use the same 3/16 Hex-head tool to adjust the
Horizontal lens shift to center image horizontally on
screen. See chart on page 12 for shift range avail-
able. The tool will automatically center on top of the
adjustment nut when inserted into the access hole.
Lens Adjustments (Zoom / Focus / Shift)...

16
ProntoNeo Remote Control Description
OKCHVOL
+
+
--
Sending LED Learning Eye
LCD Touch Screen
Device Button 
to activate the 
Device Overview 2 Content 
Specific Buttons
Hard Buttons Mode Button 
to switch to 
another mode Page Down ButtonPage Up Button Backlight Button to 
activate the displaySerial Port for 
Communicating
with a PC
Mode Buttons:
Press and hold 3 seconds to
activate the Mode screen.
Volume Up and 
Volume Down
MuteDevice Button:
To activate the 
Device Overview.
Channel Up and...

Insert the 3 AA batteries, making sure to set them in with the proper polarity.
1. Press and open the back cover.
2. Align the batteries according to the (+) and (-) indication inside the case.
3. Replace the back cover.
17
Batter y Installation and Replacement 

18
ProntoNeo Remote Control Usage
Main Screen:
This screen will turn on the
Projector and send you to
the Aspect Ratio or Source
screen.Source Screen:
This screen will allow you
to select your Source.Aspect Ratio Screen:
This screen will allow you
to select your Aspect Ratio.
Menu Screen: 
This screen will access the
Menu.Focus & Zoom Screen:
This screen allows you to
access the focus and zoom
feature.Runco Screen