Runco Vx 2cx Projector User Manual
Here you can view all the pages of manual Runco Vx 2cx Projector User Manual. The Runco manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
Maintenance and Troubleshooting Runco VX-2cx/VX-2dcx Owner’s Operating Manual 59 PREL IMINARY 5.3 Troubleshooting Tips Table 5-1 provides some general guidelines for troubleshooting problems you may encounter with the VX-2. If you encounter an issue not described here, please contact Runco Technical Support. Table 5-1. Troubleshooting Chart SymptomPossible Cause(s)Solution The projector does not turn on after initial installation. The power LED on the front of the DHD Controller lights red after...
Page 72
Maintenance and Troubleshooting 60 Runco VX-2cx/VX-2dcx Owner’s Operating Manual PREL IMINARY Notes:
Page 73
Runco VX-2cx/VX-2dcx Owner’s Operating Manual 61 PREL IMINARY 6.1 RS-232 Connection and Port Configuration To interface the DHD Controller with a home theater automation/control system or a PC running terminal emulation software, connect it to your control system or PC as shown in Figure 3-11. Configure the RS-232 controller or PC serial port as follows: no parity, 8 data bits, 1 stop bit and no flow control. Set the baud rate to 19200, to match that of the DHD Controller RS-232 port. 6.2...
Page 74
Serial Communications 62 Runco VX-2cx/VX-2dcx Owner’s Operating Manual PREL IMINARY Input Selection Commands COMPONENTNAYESSelects the Component input COMPOSITENAYESSelects the Composite video input DVI1NAYESSelects the DVI 1 input DVI2NAYESSelects the DVI 2 input HD1NA YESSelects the RGB HD 1 input HD2NA YESSelects the RGB HD 2 input INPUT?NANAReturns active input SVIDEO1NAYESSelects the S-Video 1 input SVIDEO2NAYESSelects the S-Video 2 input Aspect Ratio Commands ANAMORPHICNAYESSelects the...
Page 75
Serial Communications Runco VX-2cx/VX-2dcx Owner’s Operating Manual 63 PREL IMINARY Picture Adjust Commands BRIGHTNESS-100/100YESSets a value for brightness BRIGHTNESS?NANAReturns brightness setting value CHROMADELAY-12/12YESSets a value for input color chroma delay CHROMADELAY?NANAReturns input color chroma delay setting COLOR-100/100YESSets a value for color COLOR?NANAReturns color setting value CONTRAST-100/100YESSets a value for contrast CONTRAST?NANAReturns contrast setting value FILMMODE0/1YESSets...
Page 76
Serial Communications 64 Runco VX-2cx/VX-2dcx Owner’s Operating Manual PREL IMINARY Input Position Commands IHEIGHT-100/100YESSets the value for input height IHEIGHT?NANAReturns input height value IHPOS-100/100YESSets a value for horizontal input position IHPOS?NANAReturns input horizontal position value IVPOS-100/100YESSets a value for vertical input position IVPOS?NANAReturns input vertical position value IWIDTH-100/100YESSets the value for input width IWIDTH?NANAReturns input horizontal width value...
Page 77
Serial Communications Runco VX-2cx/VX-2dcx Owner’s Operating Manual 65 PREL IMINARY Miscellaneous Commands BKGND-100/100YESSets the background color for letterbox or 4:3 aspect ratio (-100 = black; 100 = white) BKGND?NANAReturns background setting value DATE?NANAReturns product manufacture date HDINPUTRESNAYESSets YPbPr input resolution and refresh rate for HD1/HD2, as follows: 0 = 480i 1 = 480p 2 = 576i 3 = 576p 4 = 720p / 60 Hz 5 = 1080i / 60 Hz 6 = 720p / 50 Hz 7 = 1080i / 25 Hz Any other value =...
Page 78
Serial Communications 66 Runco VX-2cx/VX-2dcx Owner’s Operating Manual PREL IMINARY Notes:
Page 79
Runco VX-2cx/VX-2dcx Owner’s Operating Manual 67 PREL IMINARY 7.1 VX-2 Specifications Table 7-1 lists the VX-2 specifications. 7. Specifications Table 7-1. VX-2 Specifications Projector Type:Digital Light Processing (DLP), 3-chip, 16:9 SuperOnyx DMD Native Resolution:1280 x 720 (16:9) Aspect Ratios:Refer to Table 7-2 Video Standards:Refer to Table 7-2 DTV Compatibility:480p, 720p, 1080i THX recommends the use of 720p source material for optimal performance with this product. Scan...
Page 80
Specifications 68 Runco VX-2cx/VX-2dcx Owner’s Operating Manual PRELI MINARY Brightness and Contrast: Cinema Standards Measurement System (CSMS) Specifications - Brightness: 52.1 foot-Lamberts (fL) (VX-2cx); 57.6 foot-Lamberts (fL) (VX-2dcx) - Contrast Ratio: 271:1 (VX-2cx); 304:1 (VX-2dcx) These measurements are taken from the projector in a controlled, home theater environment. All measurements are made to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650 SpectraColorimeter...