Home > Runco > Projector > Runco Vx 2c Projector Specifications

Runco Vx 2c Projector Specifications

    Download as PDF Print this page Share this page

    Have a look at the manual Runco Vx 2c Projector Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 123 Runco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Baud rate: 19200 (fixed)
    Bits: 8
    No Parity
    All protocol in ASCII format
    RS-232 input connector pin numbers:  TxD= Pin# 2, RxD= Pin# 3, GnD= Pin# 5
    Command format (single command): command value (i.e. brightness 100).
    NOTE: A space (not an underscore) or comma may be used between the command and its value.
    Command string format: command, command value, command etc.
    (i.e. COMPOSITE, BRIGHTNESS 100, ANAMORPHIC, )
    NOTE: In between commands, a comma or space may be used
    NOTE: A carriage return must be used after each command or string.
    Other notes:
    •  For command strings, a maximum of 255 characters can be used in a single string.
    •  PARAMETER min/max refers to a function’s minimum and maximum value range.
       Inputting values above or below their range may cause unpredictable (but not fatal) results.
    RS-232 COMMUNICATIONS
    30 
    						
    							  Command   Parameter   Value Stored? Description         
         (min/max)
                               
      POWER   0/1     NA   Turns DHD On and Off       
      ON     NA     NA   Turns DHD Controller on       
      OFF     NA     NA   Turns DHD Controller off     
      COMPOSITE   NA     YES   Selects the Composite video input      
      SVIDEO1   NA     YES   Selects the S-Video 1 input     
      SVIDEO2   NA     YES   Selects the S-Video 2 input     
      COMPONENT   NA     YES   Selects the Component input     
      HD1     NA      YES   Selects the RGB HD 1 input     
      HD2     NA      YES   Selects the RGB HD 2 input     
      DVI1     NA     YES   Selects the DVI 1 input        
      DVI2     NA     YES   Selects the DVI 2 input        
      HD1Pass   NA     YES   Selects the HD 1 Pass Thru input     
      HD2Pass    NA     YES   Selects the HD 2 Pass Thru input     
      OUT43   NA     YES   Selects the output screen       
      OUT169   NA     YES   Selects the output screen       
      ANAMORPHIC NA     YES   Selects the anamorphic aspect ratio   
      STANDARD   NA     YES   Selects the standard (4:3) aspect ratio   
      LETTERBOX   NA     YES   Selects the letterbox aspect ratio     
      VIRTUALWIDE  NA     YES   Selects the VirtualWide aspect ratio   
      RGBNN   NA     YES   Outputs color space RGB w/negative, negative sync 
      RGBPP   NA     YES   Outputs color space RGB w/positive, positive sync 
      RGBS     NA     YES   Outputs color space RGB w/embedded sync on green 
      YUV     NA     YES   HD YUV output color space     
      IHPOS   -100/100   YES   Sets a value for horizontal position input   
      IVPOS   -100/100   YES   Sets a value for vertical position input   
      IWIDTH   -100/100   YES   Sets the value for width input     
      IHEIGHT   -100/100   YES   Sets the value for height input     
      OVERSCAN    0/10     YES   Sets the overscan value in %     
      OHPOS   -100/100   YES   Sets the value for width output     
      OVPOS   -100/100   YES   Sets the value for height output     
      OWIDTH   -100/100   YES   Sets the value for width output     
      OHEIGHT   -100/100   YES   Sets the value for height output     
      BRIGHTNESS   -100/100   YES   Sets a value for brightness     
      CONTRAST   -100/100   YES   Sets a value for contrast       
      COLOR   -100/100   YES   Sets a value for color       
      TINT     -100/100   YES   Sets a value for tint       
      SHARPNESS   -6/6     YES   Sets a value for sharpness       
      NIGHT   NA     YES   Selects the ISF Night setting     
      DAY     NA     YES   Selects the ISF Day setting     
      CUSTOM1   NA     YES   Sets the value per client       
      CUSTOM2   NA     YES   Sets the value per client       
      TRIGGER   1/3     YES   Sets the trigger         
      BKGND   -100/-100   YES   Sets the background color for letterbox   
    RS-232 COMMANDS
    31 
    						
    							  Command   Parameter   Value Stored? Description
         (min/max)
                               
      IHPOS?   NA     NA   Returns input horizontal position value   
      IHEIGHT?   NA     NA   Returns input vertical height value     
      OHPOS?   NA     NA   Returns output horizontal position value   
      OHEIGHT?   NA     NA   Returns output vertical height value   
      COLOR?   NA     NA   Returns color setting value     
      ASPECT?   NA     NA   Returns current aspect ratio     
      INPUT?   NA     NA   Returns active input       
      OUTRES?   NA     NA   Returns output resolution       
      SERIALNUM?   NA     NA   Returns serial number       
      DATE?   NA     NA   Returns the date of mfg       
      IVPOS?   NA     NA   Returns input vertical position value   
      OVERSCAN?   NA     NA   Returns overscan percentage     
      OVPOS?   NA     NA   Returns output vertical position value   
      BRIGHTNESS? NA     NA   Returns brightness setting value     
      TINT?     NA     NA   Returns tint setting value       
      PRESET?   NA     NA   Returns preset ISF day or night     
      POWER?   NA     NA   Returns power status       
      ASPECTIN?   NA     NA   Returns the input source aspect     
      SWVER?   NA     NA   Returns software version number     
      IWIDTH?   NA     NA   Returns input horizontal width value   
      PHASE?   NA     NA   Returns phase setting value     
      OWIDTH?   NA     NA   Returns output horizontal width value   
      CONTRAST?   NA     NA   Returns contrast setting value     
      SHARPNESS?     NA     NA   Returns sharpness setting value     
      BKGND?   NA     NA   Returns background setting value     
      INRES?   NA     NA   Returns input resolution       
      ASPECTOUT?      NA     NA   Returns output screen size     
      HWVER?   NA     NA   Returns hardware version number     
    32
    RS-232 COMMANDS 
    						
    							SPECIFICATIONS
    33
    VX-2c PROJECTOR SPECIFICATIONS
    Projector Type:Digital Light Processing™ (DLP™), 3-chip, 16:9 HD-2, DMD™
    Native Resolution: 1280 x 720 (16:9) 
    Aspect Ratios: Determined by supplied processor
    Video Standards: Determined by supplied processor
    DTV Compatibility: Determined by supplied processor
    Scan Frequency:Horizontal: 15 – 100 KHz
    Vertical: 28 – 78 Hz
    Picture Size (16:9 Screen):Recommended Width: 72 – 120 in.
    Maximum Width: 250 in. 
    Throw Distance    
    (Factor x Screen Width):
    Lens Option 1: Zoom 1.20–1.40 x width
    Lens Option 2: Zoom 1.40–1.77 x width
    Lens Option 3: Zoom 1.77–2.35 x width
    Lens Option 4: Zoom 2.35–3.60 x width
    Lens Option 5: Zoom 3.60–5.70 x width
    Lens Option 6: 0.67 x width (for rear-screen applications only) 
    Horizontal and Vertical Offset:Varies per lens - See Page 14 & 15
    Light Output: CSMS** Specifications: Home Theater Calibration:1227
    ANSI Lumens; 52.1 Foot-Lamberts (fL); 2500 ANSI Lumens* 
    Contrast Ratio:CSMS** Contrast Ratio: 217:1; 2800:1 ANSI 
    Lamp:275W UHP 
    Lamp Life:2000 hours @ 6500º Kelvin 
    Controller Interface: (1) DVI Connector 
    12V Output:See Controller for Specifications 
    Power Requirements:100 – 240V AC, 50/60 Hz, 510W 
    Operating Environment: 40° – 95° F, (5° – 35° C), 0% – 90% Humidity (non-condensing) 
    Dimensions (w/out feet):Width: 20 7/8 in. (530.20 mm)
    Depth: 27 7/8 in. (708.00 mm)
    Height: 8 7/8 in. (225.40 mm), with feet 9 7/8 in. (250.80 mm)
    Weight: 81 lbs. (36.8 kg) (without lens) 
    Regulatory Approvals:Complies with FCC, CE, C-Tick 
    Limited Warranty: Projector: (2) Two years parts and labor from the date of delivery to the end user 
    Lamp Warranty: 1000 hours or (6) six months, which ever comes first..  
    						
    							34
    DHD™ DIGITAL CONTROLLER SPECIFICATIONS
    Aspect Ratio:Anamorphic, Letterbox, VirtualWide, 4:3 (on either 16:9 or 4:3 screens)
    Input Standards:NTSC/PAL
    Output Resolution:720P
    Outputs:(1) HD - R (Pr), G (Y), B (Pb), H, V; (1) DVI w/HDCP
    Inputs:(1) Composite, (2) S-Video, (1) Component (480i or 576i),
    (2) RGBHV/Component HD, (2) DVI Digital w/HDCP
    Control Options:Discrete infrared remote, (2) RS-232, (1) 9-pin connector, (1) RJ-11,
    Front panel controls
    Screen Trigger/Masking Outputs:(3) 12V DC, 1/8A
    Bandwidth:150 Mega Samples/Second (MSPS)
    Power Requirements:100-230V AC (auto-sensing), 50/60 Hz, 160W
    Operating Environments:41°-95°F (5°-35°C); 0-90% Humidity (non-condensing)
    Dimensions: Width: 17 1/2 in. (443 mm)
    Depth: 11 3/16 in. (284 mm)
    Height: 3 3/4 in. (95.25 mm)
    Weight: 13 lbs. (5.9 kg)
    Regulatory Approvals:Complies with FCC Class B, CE, C-Tick
    Limited Warranty:Service Labor and Parts:
    Runco warrants the product for two years from the date of delivery to the end user.
    SPECIFICATIONS 
    						
    							RUMA-010120
    8-6-04 v5.0
    Runco International
    2900 Faber Street
    Union City, CA 94587
    Ph (510) 324-7777 / Fax (510) 324-9300
    1-800-23-RUNCO 
    						
    All Runco manuals Comments (0)

    Related Manuals for Runco Vx 2c Projector Specifications