Runco Dr 300 Projector User Manual

19
PAGE 3of the SETUP OPTIONS menu is where signals can be set for auto-select, or manually set
for one of a number of types of signals exclusively. Typically, all of these adjustments should be left in
AUTO unless using a questionable source such as a VCR.
SIGNAL
SELECT:
RGB:Can be set for AUTO (recommended), RGB or Component. If set to RGB, a component signal
will not be displayed properly; If set to COMPONENT, an RGB signal will not be displayed properly. 
VIDEO:Can be set for AUTO (recommended), NTSC...

20
PAGE 5
The last page of the setup menu is where the screen type is defined (4:3 screen, 16:9 screen, 16:9
screen with an anamorphic lens) as well as default source selection.
DEFINE SCREEN TYPE:
This is where you tell the projector what aspect ratio screen you are using,
and whether or not you are using an anamorphic lens. This MUST be set first before using the projec-
tor, as the aspect ratios the projector creates will be dependent on this setting.
There are three options for setting the screen...

21
TOOLS:For service personnel only. This is for aiding the service technician with software downloads
and diagnostics. It does not serve any purpose for normal operation.
HELP:
The DR-300 projector has information about every function built-in.  The HELP menu includes
a CONTENTS page, in which information about any function in the projector can be accessed.
INFORMATION gives information about the current source, including frequency, signal type, resolu-
tion, etc. The PROJECTOR INFO page also contains...

22
Troubleshooting
TROUBLESHOOTING
Your DR-300 projector is a very reliable, low maintenance projector. Occasionally, trouble
may develop. However, before calling your Runco dealer for service, please refer to the fol-
lowing basic troubleshooting guide:
Projector does not turn on.
No Picture or blue screen.
The image is not square.
The remote control does not
function or is erratic.
The projector tries to turn on
but the lamp does not come
on and the status LED on the
projector is blinking.Is the unit...

RS-232 CONTROL CODES
Function Code Data
POWER ON 02H 00H 00H 00H 00H 02H
POWER OFF 02H 01H 00H 00H 00H 03H
INPUT SELECT RGB/COMPONENT 02H 03H 00H 00H 02H 01H 01H 09H
INPUT SELECT VIDEO 02H 03H 00H 00H 02H 01H 06H 0EH
INPUT SELECT S-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13H
PICTURE MUTE ON 02H 10H 00H 00H 00H 12H
PICTURE MUTE OFF 02H 11H 00H 00H 00H 13H
SOUND MUTE ON 02H 12H 00H 00H 00H 14H
SOUND MUTE OFF 02H 13H 00H 00H 00H 15H
ON SCREEN MUTE ON 02H 14H 00H 00H 00H 16H
ON SCREEN MUTE OFF 02H 15H 00H 00H 00H...

DR-300 Projector Dimensions
13.2114.028 3.398 16.186
Top View
Front View
Side View
Status
Power
24 

DR-300 Projector:
Specifications
25
Projector Type:Digital Light Processing™ (DLP)™
Native Resolution:Native 1024 x 768, Widescreen 1024 X 576
Video Standards:NTSC, (PAL/NTSC International version)
Lamp:135 W NSH lamp
Lamp Life:1000 hours
Light Output:1000 ANSI  lumens
Picture Size:36 to 200 inches diagonal
Throw Distance:Minimum= 2.0 x screen width
Maximum= 2.3 x screen width
Vertical offset:16:9 screens: .265 x screen width / 4:3 screens: .173 x screen width
The vertical offset numbers are within ± 5%...

RUMA-006900 rev 11-01
Runco International  2900 Faber Street   Union City, CA 94587  ph (510) 324-7777  fax (510) 324-9300  www.runco.com