Runco Dlc 2000hd Projector User Manual

USER’SMANUAL
DLC-2000HD 
Projection System
Liquid Crystal Projector &
Pixel-For-Pixel
TMController with VivixTMTechnology 

Table of Contents
Limited Warranty ................................................................................................ 1
Introduction........................................................................................................ 3
Warnings and Safety Precautions.................................................................... 4
Warning .......................................................................................................... 5
Safety Tips...

1
LIMITED WARRANTY
Congratulations on your purchase of a Runco video product and welcome to the Runco family! We
believe Runco produces “The World’s Finest Home Theater Products”. With proper installation, setup
and care, you should enjoy many years of unparalleled video performance. Please read this consumer
protection plan carefully and retain it with your other important documents. 
This is a LIMITED WARRANTY as defined by the U.S. Consumer Product Warranty and Federal Trade
Commission Improvement...

2
EFFECTIVE WARRANTY DATE:
This warranty begins on the effective date of delivery to the end user. For your convenience, keep the
original bill of sale as evidence of the purchase date.
IMPORTANT: WARRANTY REGISTRATION:
Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach
you promptly if we should discover a safety problem or product update for which you must be notified.
TO OBTAIN SERVICE, CONTACT YOUR RUNCO DEALER:
Repairs made under the terms of the...

3
Introduction
Congratulationson your purchase of the DLC-2000HDsystem! This system was designed to
be a fully integrated system, which includes the DLC-2000HDProjector and the unique PFP™
Controller. This system is extremely easy to use, as all of the controls for the Projector have
been integrated into the PFP Controller for ease of operation and control. Not only does the
Controller control all aspects of the Projector, but it also performs all of the NTSC or PAL video
scaling for the Projector not to...

Warnings and Safety Precautions
CAUTION:
To turn off main power, be sure to remove the plugs from power outlets. The power outlet sock-
et should be installed as near to the equipment as possible, and should be easily
accessible.
REMARQUE:
Pour mettre l’appareil hors circut, s’assurer de retirer la fiche de la prise d’alimentation.
La prise d’alimentation doit être installé aussi proche que possible de l’appareil et doit être facile
d’ accès.
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO...

5
WARNING
SAFETY TIPS
This equipment has been tested and found to comply with the limits for a Class ‘B’ digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial envi-
ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the Installation Manual, may cause harmful interference
to radio...

6
Indicator Lights
Top View
Lamp
warningTemp.
warningReady
Standby
Lamp warning:Lights up YELLOW when
the lamp has reached its useable life
expectancy (1500 hours).
Temp warning:Flashes RED when the
internal temperature is too high. Ensure
that the Projector is in a reasonably cool
environment and there is nothing blocking
the ventilation holes on the Projector.
Ready:Lights GREEN when the Projector
is ready for use.
Standby:Lights when Projector is in the
standby mode; dims when in operation.
The...

7
Front and Rear Panel Descriptions
Front Panel
1. IR RECEIVER
Receives the infrared signal from the remote control.
2.POWER BUTTON
Turns the unit ON or OFF. The Main Power switch on the rear of the unit must be on first for this button to be active.
3. POWER INDICATOR
When the PFP Controller is ON, this LED will illuminate GREEN. When the unit is OFF or in STANDBY, this LED will
illuminate RED. A flashing red light indicates a fault. If this happens, unplug the unit for 2 minutes and re-try. A yellow...