Runco Cl 700 Projector User Manual

							4. Basic Operation16
Selecting ASPECT ratio  
Selecting Video Memory
Setting Menu  
■Select the proper Aspect Ratio according to the 
format of signal content. There are four Aspect 
Ratio for choice:
■ANAMORPHIC: 4:3 image is stretched horizontally 
to fit the 16: 9 screen. This is for 16:9 DVDs.
■4 X 3: The input signal will be scaled to fit 4 : 3 
display mode in the center of screen.
■LETTERBOX: Letter box mode. Image in letter box 
format is enlarged to fit 16 :9 full screen display and 
the upper/lower portion are compressed.
■VIRTUAL WIDE: 4:3 image is enlarged NON-
linearly in horizontal direction to fit 16: 9 full 
screen display. 
■Press the CUSTOM button to recall a setting in the 
memory. Each time you press this button, the unit 
will recall the settings as follows: MEMORY 1 
J 
MEMORY 2 
J MEMORY 3 J OFF.
■Press the MENU button to turn on /off the on-
screen display menu.
■Use the ARROW buttons (c/e/d/f) to select 
the menu or to make various adjustments.
■Press the ENTER button to enter the setting of 
items in the menu, or press the EXIT button to 
leave and save the settin g of items in the menu.
■For more detail settings, see 5. Menu on page 18
4X3LETTERBOX
ANAMORPHIC
VIRTUAL WIDE
ENTER
CUSTOM PICTURE
ENTER
EXIT MENU 
						

							AC TIV EPIP -PIP
L IG HT
PIP +
O N
VID EOS-V ID EOC O M PO NEN T
CO M PO NEN THDRG BHDPC
O FF
P IP  F unctio n
* P re ss th e P IP  b utto n to  e nable  th e P IP  fu nctio n
* F or P IP  p urp ose s, th ere  a re  tw o g ro ups o f in puts
  s e para te d b y th eir  d is p la y m odes:
  V id eo  G ro up: V id eo, S -V id eo a nd C om ponent
  Y /C
  G ra p hic  G ro up: H DTV  in put a nd C om pute r in put.
*  T he P IP  c a n s h ow  o ne in put fr o m  th e G ra phic  G ro up
  w it h in  o ne in put fr o m  th e V id eo G ro up, o r s h ow  o ne
  in put fr o m  V id eo G ro up w it h in  o ne in put fr o m  th e
  G ra phic  G ro up.
* P re ss th e P IP  b utto n to  s w it c h  to  th e m ain  w in dow
  o r tu rn  o ff  P IP  fu nctio n.
* S ele ct th e in put s o urc e  o f m ain  w in dow  b y p re ssin g
  th e IN PU T b utto n.
* P re ss th e A C TIV E b utto n to  s w it c h  to  th e a ctiv e
  w in dow . Y ou c a n c h ange th e in put s ig nal  s e ttin g in
   a ctiv e  w in dow .
* P re ss P IP + o r P IP - to  a dju st th e s iz e  o f P IP  w in dow .
* A dju st th e p osit io n o f th e P IP  w in dow  w it h  th e A R RO W
  k e ys (     ,    ,    ,    ) .
T u rn in g o ff t h e P ow er
* P re ss th e O FF k e y o n th e r e m ote  c o ntr o l  to  tu rn  o ff  th e u nit .
*  T he P O W ER  L E D  w ill  b lin k g re en a nd th e fa ns w ill  o pera te
  fo r 1  m in ute  to  c o ol  d ow n th e la m p. T he p ro je cto r w ill  n ot
  r e sp ond to  a ny c o m mand fo r 1  m in ute . 
*  T he P O W ER  L E D  w ill  lig ht s o lid  o ra nge o nce  th e c o olin g
  d ow n c ycle  h as c o m ple te d.
* A fte r tu rn in g o ff  th e u nit , th e P O W ER  L E D  w ill  b lin k g re en
  a nd th e fa ns w ill  o pera te  to geth er fo r o ne m in ute .
* F ans w ill  r u n fo r 3  m in ute s to  c o ol.
*  Y ou m ay tu rn  th e p ro je cto r b ack o n a fte r th e fir s t m in ute . 
						

							5.  M en u1 8
5 .M en u
U sin g t h e M en u 
This unit  is e q uipped  w ith a n  o n s c re en  d isp lay ( OS D ) m en u fo r m ak in g v ario us a d ju stm en ts  a n d  se ttin gs. 
T here  a re  3  d if fe ren t m en u la n gu age s; p age2 1 L an gu age  s e ttin g fo r m ore  d eta ils .

P re ss th e M EN U but to n t o  t u rn  o n / o ff  t h e o n-s c re en  d isp lay m enu.

U se  t h e A RRO W b utto ns (///) t o  selec t the  menu o r to m ak e vario us a d ju stm en ts.

P re ss th e E N TER  butto n t o  ente r the  s e tting  o f ite m s in  th e m en u , o r p re ss th e E X IT  b u tto n to  le av e  an d  s a v e  th e 
settin g o f  it e m s in  t h e m en u.
P IC TU RE S ettin g P ag e
In  th is M enu, a ll  f r o nt p anel ad ju stm ents c an  b e m ad e. T hese s e ttin gs c an  b e sto re d  in  3  s e p arate  v id eo  m em orie s,  in 
w hich eac h c an  hav e  d iffe re nt p ara m eters fo r d if fe re n t s o urce s.
T here  a re  1 2 M en u It e m s:  B R IG HTN ESS —  CO NTRA ST —  C OLO R —  S H ARPNESS —  TIN T —  C O LOR  
T EM PERA TU RE —  F IL T ER S — R ED  — GREEN  —  B LU E —  Y ELLO W  —  W HITE .
1.B R IG HTN ESS: A djust the  p ic tu re  brigh tness (0 ~  60) . H igh er the  s e tting, b righ te r th e pic tu re .  And  low er the  
se ttin g,  d arke r t h e p ic tu re.
2 . C  O NTRAST:  Adjus t  the picture  co ntra st  (0 ~ 6 0). H ighe r the  se tting, g reate r  the  co ntra st.  A nd  lower  the  se tting , 
lo w er t h e c o ntr a st. 
3 .C OLOR: A djus t c o lor int en sity  ( 0 ~ 30) . H igh er the se tting,  t he  g re ater  the  colo r inten sity . A nd  low er t he  s e tting , 
lo w er the  c o lo r in tensity .
4. S H ARPN ESS: A djust t he p ic tu re  sha rp ness (-10 to +10). Higher the setting, the sharper the picture. And lower the 
s e ttin g,  t h e s o ft er th e p ic tu re .
E N TER
E XITME N U
RUN CO  C L-7 0 0 
						

							5.  M en u19
5 .T IN T:  A djust c o lo r to nes ( 0 ~  30) .  T he hig he r th e setting ,  t h e pictu re  b eco m es g re en is h . T he lo w er th e s ettin g,  t h e 
pic tu re  b eco m es p urplish .
6 .C O LO R T EM P.: A dju st t h e c o lo r te m pera tu re .

0  :  T he d efa u lt  c o lo r te m peratu re  o f  la m p.

1  :  L o w co lo r t e m pera tu re  ( 6 500°K ):  V id eo  S ta n d ard .

2  :  M iddle  c o lo r te m peratu re  ( 90 00°K): M ak es t h e w hit e  c o lo r n o rm al.

3  :  H igh  co lo r tem pera tu re  ( 1 1500°K): M ak es t h e w hit e  c o lo r b lu is h .
7.FILTERS: Turn on /off the video filters. This could reduce t h e n o is e  in  t h e p ic tu re  t o  g e t s h arp er p ic tu re .  T here  a re  
4  filte rs fo r v id eo  inp ut ( 0  ~ 3 ) and  2  filte rs fo r g ra p hic in put (0 ~  1).  H ig he r t he  se ttin g, the  less t he  n o ise.
8.RED: Adjust red color independently (0 ~ 30). Higher the s e ttin g, t h e g re ate r t h e r e d  c o lo r in te n sit y . A nd  lo w er th e 
se ttin g,  lo wer t h e r e d  c o lo r in te n sit y .
9 .G REEN : A djust g re en c o lo r in d ep endently  ( 0  ~ 3 0). H igh er the  s e tting ,  the g re ater t he  gre en c o lo r intensity .  A nd  
lo w er t he  se ttin g, low er th e gre en  co lo r intensity .
1 0.BLU E: A djust b lue c o lo r in d ep en d en tly (0  ~  30). H igh er the  s e tting , t h e gre ate r the  b lue c o lo r in tensity . A nd  low er 
the  setting ,  lo wer t he  blue c o lo r intensity .
1 1.YELLO W : A djust y e llo w  co lo r ind ep en d en tly (0 ~  30). H ighe r t h e s e ttin g, t h e g reate r t h e y e llo w co lo r in te n sit y . 
A nd  low er th e setting , lo w er the  y e llo w  c o lo r in tensity .
1 2.WH IT E: A djust t he  w hite  c o lo r ind ep en d en tly ( 0 ~  1 0).  H igh er t h e s e tt in g, t h e g reater  t he  w hite  c o lo r in tensity . 
A nd lo w er the  s etting ,  low er t he  w hite  c o lo r intensity .
D IS PLA Y S ettin g  P ag e 
In  this M en u P age , y o u c o uld  s e t t he  w ay h o w  the  p ro jecto r d isp lay t he  p ictu re .
T here  a re  5  M en u Ite m s in this p age: SOU RC E — A SP EC T  —  PC &H D TV —  SA VE — L O AD .  
1 .SO URC E:  S e le ct t h e in put s o urc e .

V ID EO : C om posit e  vid eo  s ig n al  in put. 

S -V ID EO : S -V id eo  s ig n al in put  

C O MPO NEN T:  C om po nent Y /CB/ CR inp ut

C O MPO NEN T H D :  D TV Y /PB/ PR in put

RGB HD:  D TV RG BHV  sig n al in put

P C : C om puter s igna l  in put P C
R UN CO  C L-7 0 0 
						

							5. M en u2 0
A ctiv e  Im age A re a
A ctiv e  I m age A re a
1 6:9  S cre en s:
L E TTE R BO X: T he im age in  th e L ette rb ox m ode w ill  b e s tr e tc h ed v e rtic a lly , a nd th e to p a nd b otto m  p ortio n b la nke d o ff.  T his  r a tio  is  b est s u it e d fo r L ase rD is c m ovie s o r n on-a nam orp hic  D VD s .
V IR TU AL W ID E: A  4 :3  im age is  h oriz o nta lly  s tr e tc h ed n on-lin early  to  a llo w  a  4:3  im age to  c o m ple te ly  fill  a  1 6:9  s cre en w it h out u sin g a ny b la nkin g.
A ctiv e  Im age A re a
2. A SPEC T: T here  a re  fo ur a sp ect r a tio s a va ila ble  th at c a n b e s e le cte d  f o r v id eo  s ig n al  in p uts .
A NAM ORPH IC : T he im age is  c o m pre sse d v e rtic a lly , b ut a nam orp hic  s o ftw are  w ill  a ppear p ro perly  p ro portio ned. T his  is  b est s u it e d fo r u se  w it h  1 6:9  D VD s . 
4  x  3 : T he in put s ig nal  w ill  b e s ca le d to  fit  in  th e c e nte r o f th e 1 6:9  s cre en. 
3 . P C  &  H DTV : T he fo llo w in g s e ttin gs a re  o nly  a va ila ble  w it h  a  P C  o r D TV  R G B s ig n al:
     *  A U TO : A dju sts  th e p hase , fr e quency a nd p osit io n s ig nal.
     *  P H ASE: A dju sts  th e p hase  o f s ig nal.
     *  F R EQ UEN CY: A dju sts  th e fr e quency o f s ig nal.
     *  H . P O S.: A dju sts  th e h oriz o nta l  p osit io n o f th e im age.
    *  V . P O S.: A dju sts  th e v e rtic a l  p osit io n o f im age.
4. S A VE: T here  a re  3  v id eo m em orie s in  w hic h  th e u se r c o uld  s a ve  th eir  s e tt in gs, 
    in clu din g a ll  m enu it e m s o f th e P ic tu re  S ettin g M enu.
5. L O AD: L oads th e s e ttin gs fr o m  o ne o f th re e v id eo m em orie s. 
						

							5.  M en u21
E N VIR O NM EN T S ettin g  P ag e
In  t his  M enu, t he  g lo bal  s e ttings fo r t he  pro ject o r c an be  m ad e.
T here  are  5  M en u It ems :  D EFA U LT — L A M P TIM ER —  B A C K LIG HT — A UTO  O FF —  L A M P H O URS. 
1 .D EFA U LT : L o ad  the  d efa ult v alue  o f  c u rre n t inp ut s o urc e .
2 .LA M P T IM ER :  R ese ts  th e lam p t im er. T his sho uld  o nly  b e d o ne afte r t he  la m p has b een  r e plac e d .
3.BACK L IG HT:  T urn  o n/off t h e P o w er O N In d ic ato r.
4 .A U TO  OFF: S e t th e au to  sh utd o w n tim er. T he s e tting tim er is  fr o m  1 0 m inutes to 3  hou rs.
5 . LA M P HO  URS: T his  disp lay s  the  num ber  of ho urs th e  lam p ha s b een u se d  (th e  use ab le  lif e tim e of the  lam p is  1000 
ho urs). If  the  lam p h o urs e x ce ed  10 00, a  w arn ing m essa ge  will  b e  disp lay e d  on  scre e n ; w hen th is  hap pen s, co ntac t 
y o ur R unco  deale r fo r a  new  lam p.
IN STA LL S ettin g P ag e
This  me n u c o ntain s ite ms ne ce ssa ry  fo r ins ta lla tio n.
T here  a re  3  M en u It ems  in clu d ed :  L A N GUAGE, M IRRO R a n d  K EY ST O NE.  
1 .LA N GUAG E: T here  a re  3  la ngu age s th at c o uld  b e se lecte d  fo r the  m enus: E nglish, F re n ch  a nd  S pan ish .
2.M IR RO R: T he p ro jecto r c o uld  be  ins ta lled  o n a  c e iling  o r b ehin d  a  s c re en , o r w it h  o ne o r m ore  m ir ro rs.  Ther e  a re  
fo ur s e ttin gs: 

F L O OR FRO NT

CEIL IN G FRO NT

FL O OR R EAR

C EIL IN G R EA R
3.K EY ST O NE:  C orre cts  fo r t r a p ezo id al  d is to rtio n a s a  r e su lt  o f  t h e a n gle o f  p ro jectio n ( -1 2 ~  + 12).  T his  c an  c o rre ct 
fo r u p to ±  1 2 d egrees o f o ffs e t.
R UN CO  C L-7 0 0
R UN CO  C L-7 0 0 
						

							6. Additional Information22
6. Additional Information 
Warning Message   
Replace the Lamp (Contact your Runco Dealer) 
■It is normal for lamp to be darker when this unit 
has been used for a period of time.
■ Lamplife is expired ! Please change a new lamp. 
And reset the lamp timer  message will be 
displayed for 30 seconds on the screen if the lamp 
has operated for 950 hours.
■ Please change the lamp, Lamp will exceed its 
lifetime after (hours):   message will be displayed 
on the screen for 30seconds  for each time turning 
on, if  the lamp has operated for 980 ho urs. And 
the number will count down continuously.
■ Please change the lamp !  message will display on 
the screen all the time  and  the POWER  LED will 
blink in orange and green  sequentially if the lamp 
has operated for more th an (1,000) hours.
■The power will turn off automatically after 10 
minutes.
1. Loosen the screw of  front lamp cover 2. Take off the front lamp 
cover
3. Loosen the three  screws of lamp shield
4. Take off the lamp  shield
5. Loosen the two  screws of lamp 
module.  6. Pull out the lamp 
module horizontally. 
7. Insert the new lamp  module into this 
projector 
horizontally until it 
is securely in place. 8. Tighten the two screws 
of lamp module.
9. Put on the lamp shield.
Lamplife is expired !
Please change new lamp
And reset the lamp timer
Please change the lamp !
Lamp will exceed its 
lifetime after (hours):
Please change the lamp !
1
2
3
5
46
78
9 
						

							6. Additional Information23
Troubleshooting
10.  Tighten the three screws of lamp 
shield.
11. Put on the front  lamp cover. 12. Tighten the screw of 
front lamp cover.
13.  Turn on the power and  go into Environment 
Setting Page to reset the 
Lamp Timer  item.
Problem                       Possible Cause                            \
         Remedy This unit does not 
turn on. There is no power from power cable. Plug 
the power cord into the AC inlet on the 
rear of this unit, and plug the power cord into 
to the power inlet.
The power switch is not turned on. Turn on the power switch.
Turn on this unit again within the 
cooling down procedure. Wait this unit complete the cooling down 
procedure.
Front lamp cover is not attached well. C orrectly attach the front lamp cover.
No picture The front lamp cover is not correctly  attached. Correctly attach th
e front lamp cover.
This unit is not correctly connected to 
the input source device. Check the connection.
The input signal has not been correctly 
selected. Select the correct input 
signal with INPUT key 
on the remote control.
The input signal has not been correctly 
selected in  INPUT SOURCE  item in 
 DISPLAY Setting Page . Select the correct
 input signal.
POWER LED or LAMP LED blinking. Please contact your Runco dealer for  assistance.
Image is unstable The connection cables are not  connected to this unit. Correctly connect the cables to the 
appropriate terminals.
Picture is burred The projection lens is not correctly  focused. Adjust the focus of proj
ection lens with the 
focus ring.
This unit and the screen are not placed 
squarely. (90 degree) Adjust the projection angle and direction, and 
the height of this unit.
Remote control does 
not work correctly The batteries are exhausted.  Replac
e both batteries with new ones.
LAMP LED blink in red The front lamp cover is not correctly  attached. Correctly attach th
e front lamp cover.
The cooling fan does not work well. Please contact your Runco dealer for  assistance.
The temperature inside this unit is 
extremely high. Check that the ventilation holes are not 
blocked.
POWER LED blink in 
orange and green 
sequentially The lamp has exceed its specified 
usage hours.
Replace the lamp with a new one.
The lamp has burned out. Repl ace the lamp with a new one.
101112 
						

							Specifications
Projector Type:Digital Light Processing™ (DLP™)
Native Resolution: 1280 x 720
Video Standards: NTSC, NTSC 4.43, PAL-M, PAL-N, SECAM
Lamp: 210W
Lamp Life: 1000 hours
Picture Size: 40” to 300” diagonal
Throw Distance: Standard Throw Lens: 2.00 - 2.40 x screen width
Short Throw Lens option: 1.33 - 1.60 x screen width
Vertical Offset: Standard Throw Lens: 2
Two inches offset means that the center of the projection lens is 2
abov e the top of the screen (inverted ceiling mount) or 2 below the
bottom of the screen (upright floor mount).
Short Throw Lens option: Min + Max TD / 2 x 0.0384
Light Output: 18 foot-Lamberts on 84 wide screen 1.3 gain material
Inputs: Composite, S-video, RGB/Component (via BNC), Component (RCA),
RGB (DB 15)
Contrast Ratio: 900:1
Power Requirements: 100-240 VAC, 250W
Power Consumption: 310W (Max.)
12V Output: Max .250 Amp, activ e when the projector is on
Dimensions (w/out feet): Width: 15.75 in. / 400 mm
Depth: 13.66 in. / 347 mm
Height: 4.6 in. / 117.7 mm
Weight: 14.8 lbs. (6.7 kg)
Regulatory Approvals: UL, CSA, GS-TUV, CCIB, CB, FCC, CE, VCCI and C-Tick
Operating Environment: 41°-95° F (5°- 35° C), 20%-80% Humidity
Warranty: Service Labor and Parts: Runco warrants the product for (2) two
years from the date of deliv ery to the end user.
Lamp Warranty: 1000 hours or (6) six months, which ev er comes first.
* Optional ceiling bracket av ailable.
24
6. Additional Information 
						

							Dim en sio ns 
U nit :  in . ( m m)
15.7 5 in . ( 4 00 m m)
1.6  in .(4 .5  m m)
1.4  in .(3 5.2 6 m m)
13.0 9 in . ( 3 32.5  m m)6.3  in . ( 1 60 m m)
5.9  in . ( 1 50 m m)7.9 3 in .  ( 2 0 1.5  m m)
13.6 6 in . ( 3 47 m m)
4.6  in .(1 17.7  m m)
5.1  in . ( 1 30.2  m m)
6. A ddit io nal  In fo rm atio n     
U se rs  M anual
+
9.6 6 in . ( 2 45.4 3 m m)
2.7 8 in . ( 7 0.6 4 m m)