Runco Cl 500 Projector User Manual

4. Basic OperationUser’s Manual17
PIP function     
Turning off the Power 
■Press the PIP button to enable the PIP function
■For PIP purposes, there are two groups of inputs 
separated by their display modes: 
Video Group: Video, S-Video and Component Y/
C
B/CR inputs 
Graphic Group: HDTV input and Computer input. 
■The PIP can show one input from the Graphic 
Group within one input from the Video Group, or 
show one input from Video Group within one 
input from the Graphic Group.
■Press the PIP button...

5. Menu Runco18
5. Menu
Using the Menu 
This unit is equipped with an on screen display (OSD) menu for making various adjustments and settings. 
There are 3 different menu languages; page21 Language setting for more details.
■Press the MENU button to turn on /off the on-screen display menu.
■Use the ARROW buttons (c/e/d/f) to select the menu or to make various adjustments.
■Press the ENTER button to enter the setting of items in the menu, or press the EXIT button to leave and save the 
setting of items...

5. MenuUser’s Manual19 5. TINT: Adjust color tones (0 ~ 30). The higher the setting, the picture becomes greenish. The lower the setting, the 
picture becomes purplish.
6. COLOR TEMP.: Adjust the color temperature.
■0 : The default color temperature of lamp.
■1 : Low color temperature (6500°K). Make the white color reddish.
■2 : Middle color temperature (9000°K). Make the white color normal.
■3 : High color temperature (11500°K). Make the white color bluish.
7. FILTERS: Turn on /off the video filters....

5. M en u2 0
A ctiv e  Im age A re a
A ctiv e  I m age A re a
1 6:9  S cre en s:4:3  S cre en s:
L E TTE R BO X: T he im age in  th e L ette rb ox m ode w ill  b e s tr e tc h ed v e rtic a lly , a nd th e to p a nd b otto m  p ortio n b la nke d o ff.  T his  r a tio  is  b est s u it e d fo r L ase rD is c m ovie s o r n on-a nam orp hic  D VD s .
V IR TU AL W ID E: A  4 :3  im age is  h oriz o nta lly  s tr e tc h ed n on-lin early  to  a llo w  a  4:3  im age to  c o m ple te ly  fill  a  1 6:9  s...

5. MenuUser’s Manual21
ENVIRONMENT Setting Page
In this Menu, the global settings for the projector can be made.
There are 5 Menu Items: DEFAULT — LAMP TIMER — BACK LIGHT — AUTO OFF — LAMP HOURS. 
1. DEFAULT: Load the default value of current input source.
2. LAMP TIMER: Resets the lamp timer. This should only be done after the lamp has been replaced.
3. BACK LIGHT: Turn on/off the Power ON Indicator.
4. AUTO OFF: Set the auto shutdown timer. The setting timer is from 10 minutes to 3 hours.
5. LAMP...

6. Additional Information
Runco22
6. Additional Information 
Warning Message   
Replace
 the Lamp (Contact your Runco Dealer) 
■It is normal for lamp to be darker when this unit 
has been used for a period of time.
■ Lamplife is expired ! Please change a new lamp. 
And reset the lamp timer  message will be 
displayed for 30 seconds on the screen if the lamp 
has operated for 1450 hours.
■ Please change the lamp, Lamp will exceed its 
lifetime after (hours):   message will be displayed 
on the screen for...

6. Additional InformationUser’s Manual23
Troubleshooting
10.  Tighten the three 
screws of lamp 
shield.
11. Put on the front 
lamp cover.12. Tighten the screw of 
front lamp cover.
13.  Turn on the power and 
go into Environment 
Setting Page to reset the 
Lamp Timer  item.
Problem Cause Remedy
This unit does not 
turn on.There is no power from power cable. Plug the power cord into the AC inlet on the 
rear of this unit, and plug the power cord into 
to the power inlet.
The power switch is not turned...

Runco
Specifications
Projector Type:Digital Light Processing™ (DLP™)
Native Resolution: 848 x 600
Video Standards: NTSC, NTSC 4.43, PAL-M, PAL-N, SECAM
Lamp: 150W P-VIP
Lamp  Life:  1500 hours
Picture Size: 40” to 300” diagonal
Throw Distance: For 16:9 Screens: 1.61 to 2.04 x screen width
For 4:3 Screens: 1.75 to 2.2 x screen width
Vertical Offset: For 16:9 Screens: .215 x screen width
For 4:3 Screens: .12 x screen width
Light Output: 1000 ANSI lumens
Inputs: Composite, S-video, RGB/Component (via BNC),...

Dim en sio ns 
U nit :  in . ( m m)
15.7 5 in . ( 4 00 m m)
1.6  in .(4 .5  m m)
1.4  in .(3 5.2 6 m m)
13.0 9 in . ( 3 32.5  m m)6.3  in . ( 1 60 m m)
5.9  in . ( 1 50 m m)7.9 3 in .  ( 2 0 1.5  m m)
13.6 6 in . ( 3 47 m m)
4.6  in .(1 17.7  m m)
5.1  in . ( 1 30.2  m m)
6. A ddit io nal  In fo rm atio n     
U se rs  M anual
+
9.6 6 in . ( 2 45.4 3 m m)
2.7 8 in . ( 7 0.6 4 m m) 

RS-2 32C  C on tr o l C od es 
C ode	 Functio n
X 01	 Pow er O n
X02	 Pow er O ff
X 03	 Messa ge O n
X04	 Messa ge O ff
X 10	 Menu ( a rro w  k e y)
X 11	 Ente r ( a rro w  k e y)
X 12	 Exit  ( a rro w  k e y)
X 13	 Up ( a rro w  k e y)
X 14	 Dow n ( a rro w  k e y)
X 15	 Left ( a rro w  k e y)
X 16	 Rig ht ( a rro w  k e y)
X 20	 Sw it c h  to  C om posit e  in put
X 21	 Sw it c h  to  S _V id eo in put
X 22	 Sw it c h  to  C om ponent in put
X 23	 Sw it h c to  D -s u b_P C  in put
X 24
 	 Sw it c h...