Ruger Single Six, Super Single Six Instructions Manual

							A FreeSafety Offer From Ruger
Do you own an “old model” (pre-1973) Ruger Single Six, Blackhawk, Super
Blackhawk, or Bearcat single action revolver like these? 
The patented Ruger Conversion Kit is an
entirely new operating system for these
revolvers.It can help prevent accidental 
discharges caused by a drop or blow to the
hammer if the user has failed to take the basic
safety precaution of keeping the hammer
down on an empty chamber. That’s very
important!
This mechanism can be factory-installed 
without any further alteration. The frame and
other major parts will not be affected by this
Conversion. The value of the gun will not be
impaired, and we will return your original
parts for collector’s purposes.
To receive a freefactory safety Conversion,
write to us at Sturm, Ruger and Company,
Inc.; Lacey Place, Dept. KC; Southport CT
06890. We will provide you with a shipping
container and instructions. You only pay ini-
tial shipping to our factory. We will cover all
other charges including return shipping costs.
Please write to us without delay if you have
one of these guns, and tell your friends about
the availability of this kit. Remember that the
safest way to carry any older single-action
revolver, regardless of manufacturer, is with
the hammer down on an empty chamber.
If your revolver has the words “New Model,”
“Bisley,” or “Vaquero” on the frame, this
offer is not applicable. Please write to us at:
Sturm, Ruger & Company, Inc.
Department KC 
Lacey Place
Southport, CT 06890
for full details and a FREEshipping box.
Three frame screws identify the “old model”
Single Six, Blackhawk, and Super Blackhawk
made from 1953 to 1972.
Serial numbers below 93-00000 identify
old Bearcat and Super Bearcat models
made from 1958 to 1972.
Arms Makers for Responsible Citizens®
RUGER
FREEinstruction manuals for all Ruger firearms available upon
request. Please specify model for which you require a manual.