Ruger P95 Decocker Instructions Manual
Have a look at the manual Ruger P95 Decocker Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 48 Ruger manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
SERVICE AND PARTS POLICY If you have any questions with regard to the performance of your RUGER® P95DC pistol, please call (520) 778-6555 or write to our Product Service Department in Prescott, Arizona, fully describing all circumstances and condi- tions involved. If you should return your pistol to the factory for repair, or order parts for it, please comply with the following suggestions for prompt service: 21 SHIPPING FIREARMS FOR REPAIR RUGER®P95DCpistols returned to the factory for services or repair should be sent to: Sturm, Ruger & Company, Inc., Product Service Department, 200 Ruger Road, Prescott, AZ 86301-6181. Telephone: (520)778-6555. Guns should be sent prepaid. W e will not accept collect shipments. The Federal Gun Control Act as well as the laws of most States and localities, do not prohibit an individual (who is not otherwise barred from purchasing or pos- sessing a firearm) from shipping a firearm directly to the manufacturer for repair. However, before you ship your pistol to us, be certain that your State or locality does not have a law or regulation which will prohibit you from receiving the pistol from us after it has been repaired. If such receiving is prohibited, then please have a Federally Licensed firearms dealer ship the gun to us. If your pistol is sent to us by a dealer, it will be returned to him after being repaired. If a hand- gun (pistol or revolver) is shipped by an individual who does not hold a Federal Firearms License, it must be shipped via U.P.S. (Next Day Air) Persons who do not hold a Federal Firearms License are prohibited by Federal law from shipping a handgun by Mail. Handguns mailed in violation of the law are impounded by the Post Office. Please do not include holster, custom grip panels, or accessories with a firearm being shipped to the factory for service. DO NOT SEND GUN BOXES OR LITER- ATURE THAT YOU CONSIDER TO BE COLLECTOR’S ITEMS – THESE ARE INVARIABLY DAMAGED OR DESTROYED IN SHIPMENT.Always insure your shipment. Enclose a letter which includes your name, address, telephone number, and serial number and model of the firearm. Describe in detail the trouble you have experienced with your firearm, or the work you wish to have done. Merely stating that the firearm “needs repair” is inadequate information. Please enclose copies of any previous correspondence. Work performed will bear a net minimum labor charge of $20.00 plus a $20.00 shipping and handling charge. The charge for metal refinishing the RUGER ® P95DC pistol (except the synthetic grip frame, which we cannot refinish) is $50.00, plus a $20.00 shipping and handling charge. Custom gunsmithing ser- vice or nonstandard alterations are NOT AVAILABLEfrom Ruger Product Service Departments. WARNING—BEFORE SHIPPING ANY FIREARM, BE ABSOLUTELY CERTAIN THAT IT AND ITS MAGAZINE ARE UNLOADED. DO NOT SHIP CARTRIDGES WITH A FIREARM. !
22 ORDERING PARTS Please contact the Arizona Product Service Department for parts availability and current prices. All parts orders for the RUGER®P95DCshould be sent to: Sturm, Ruger & Company, Inc., Parts Department, 200 Ruger Road, Prescott AZ 86301-6181. We cannot comply with open account or C.O.D. requests. Payment in the form of a check, money order, Visa or Mastercard must accompany your order. Credit Card orders must include the account number, expiration date and whether it is a Visa or Mastercard account. Minimum parts order is $1.00 plus a $3.50 shipping and handling charge. Order parts by Part Number and Part Name, include the entire serial number of the firearm for which the parts are being ordered. There is a minimum net labor charge of $20.00 plus $20.00 ship- ping and handling charge if the parts are factory fitted. All factory-fitted parts are fitted on an exchange basis only. We will not return the replaced parts. Because it is a serial numbered component, the Ruger autoloading pistol frame (part number V00280) is defined as a “firearm” by Federal law and is not sold as a separate component. *Parts designated by an asterisk must be factory fitted. These parts are fitted on an exchange basis only. We will not return the replaced parts. We will not return any part that is broken, malfunctioning, badly worn or has been modified. See “Warning - Parts Purchasers”, above. CAUTION:A gun containing modified, broken, malfunctioning, or badly worn parts should not be fired!! PARTS MUST FIT CORRECTLY WARNING - PARTS PURHASERS! It is the purchaser’s responsibility to be absolutely certain that any parts ordered from the factory are correctly fitted and installed. Firearms are complicated mechanisms and IMPROPER FITTING OF PARTS MAY RESULT IN A DANGEROUS MALFUNCTION, DAMAGE TO THE FIREARM, AND SERIOUS INJURY TO THE SHOOTER AND OTHER PERSONS.The purchaser and installer of parts must accept full responsibility for the correct adjustment and functioning of the pistol after such installation.
RUGER ® P95DC PARTS LIST Design, prices and specifications subject to change without notice. SPECIFY MODEL WHEN ORDERING (See Exploded View on Page 26.) Part Name Part No. Model * Barrel KV00621 All P95DC Models * Blocker Lever KV02112 All P95DC Models Camblock KV07000 All P95DC Models Camblock/Recoil Spring Assembly KV07000-100 All P95DC Models Case Combo, 9mm, Not Illustrated PGCC-9mm All P95DC Models Case Only, Not Illustrated PGC-CF All P95DC Models Decocker Lever, Assembly, Left Q01521-100 P95DC - Blued Model Decocker Lever, Assembly, Left KQ01521-100 P95DC - Stainless Model Decocker Lever, Right Q01552 P95DC - Blued Model Decocker Lever, Right KQ01552 P95DC - Stainless Model Decocker Lever Spring V06480 All P95DC Models Decocker Lever Spring Pin, Not Illustrated KV06460 All P95DC Models Decocker Lever Spring Retainer V06520 P95DC - Blued Model Decocker Lever Spring Retainer KV06520 P95DC - Stainless Model Ejector V00910 All P95DC Models Ejector Pivot Assembly KV26600 All P95DC Models Ejector Spring V00902 All P95DC Models * Extractor V01406 P95DC - Blued Model * Extractor KV01406 P95DC - Stainless Model Firing Pin KV01121 All P95DC Models * Firing Pin Block KV02102 All P95DC Models 23
24 Part Name Part No. Model * Firing Pin Block Plunger KH05100 All P95DC Models * Firing Pin Block Spring KQ05600 All P95DC Models Firing Pin Spring KV01850 All P95DC Models Front Sight, Must Be Drilled For Cross Pin V03203 All P95DC Models Front Sight Cross Pin, 2 Req’d. V04700 All P95DC Models * Hammer KV04004 All P95DC Models * Hammer Assembly KV04004-100 All P95DC Models Hammer Pivot Pin V02301 All P95DC Models Hammer Spring V00400 All P95DC Models Hammer Spring Seat V02403 All P95DC Models Hammer Spring Seat Detent KV05300 All P95DC Models Hammer Spring Seat Pin V02551 All P95DC Models Hammer Strut V01601 All P95DC Models Hammer Strut Pin, Not Illustrated KV05150 All P95DC Models Lock & Keys, Not Illustrated PGLK All P95DC Models Magazine, Complete, 10-Shot Capacity KP-18/10 All P95DC Models Magazine Floor Plate, Snap-On, 10-Shot, Not Illustrated V01009 All P95DC Models Magazine Follower, Not Illustrated V02907 All P95DC Models Magazine Latch, Left V02604 P95DC - Blued Model Magazine Latch, Left KV02604 P95DC - Stainless Model Magazine Latch, Right V02603 P95DC - Blued Model Magazine Latch, Right KV02603 P95DC - Stainless Model Magazine Latch Spring V02700 All P95DC Models Magazine Loader, Not Illustrated PML All P95DC Models Magazine Shell KV00505 All P95DC Models Magazine Spring, Not Illustrated V03003 All P95DC Models Magazine Spring Seat, Not Illustrated V03102 All P95DC Models
Part Name Part No. Model Rear Sight Q03300 All P95DC Models Rear Sight Lock Screw V08001 All P95DC Models Recoil Spring, Inner V02812 All P95DC Models Recoil Spring, Outer V02816 All P95DC Models Recoil Spring Collar V06103 All P95DC Models Recoil Spring Collar Retainer V06203 All P95DC Models * Sear KV02214 All P95DC Models Sear Pivot Pin, 2 Req’d. KV04450 All P95DC Models Sear Spring KV06421 All P95DC Models * Slide V00122 P95DC - Blued Model * Slide KV00122 P95DC - Stainless Model Slide Stop Assembly V03713-100 P95DC - Blued Model Slide Stop Assembly KV03713-100 P95DC - Stainless Model Trigger KV03906 All P95DC Models * Trigger Bar Assembly KV01710-100 All P95DC Models Trigger Bar Spring V05402 All P95DC Models * PARTS SO MARKED MUST BE FACTORY FITTED 25
RUGER®P95DC EXPLODED VIEW 26 RUGER P95DC V03203 V04700 (2)KH05100 KQ05600 KV02102V01406 V08001 Q03300 Q01552 V00122 V06520 Q01521-100KV01850 KV01121 V06480 V06203V06103 V02816 V02812 KV00621 KV07000 V00910 KV26600 V00902 KV02214 KV06421 KV02112V02603 V02301 KV04004-100 V00400 KV05300 V02403 V02551 V02700 V02604 KV04450 V03713-100 KP-18/10KV03906 V05402KV01710-100 V01601
THE BASIC RULES OF SAFE FIREARMS HANDLING We believe that Americans have a right to purchase and use firearms for lawful purposes. The private ownership of firearms in America is traditional, but that ownership imposes the responsibility on the gun owner to use his firearms in a way which will ensure his own safety and that of others. When firearms are used in a safe and responsible manner, they are a great source of pleasure and satisfac- tion, and represent a fundamental part of our personal liberty. Firearms do not cause accidents! Firearms accidents are almost always found to have been the result of carelessness, or ignorance on the part of the shooter of the basic rules of safe gun handling. The following rules must be observed by gun users at all times. Safe gun han- dling is not just desirable, it is absolutely essential to your safety, the safety of others, and the continuation of gun ownership and sport shooting as we know it today. 1. LEARN THE MECHANICAL AND HANDLING CHARACTERISTICS OF THE FIREARM YOU ARE USING. Not all firearms are the same. The method of carrying and handling firearms varies in accordance with the mechanical provisions for avoiding accidental discharge and the various proper procedures for loading and unloading. No person should handle any firearm without first having thoroughly familiarized himself with the particular type of firearms he is using, and with safe gun handling in general. 2. ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION. Be sure of the bullet stop behind your target, even when dry-firing. Never let the muzzle of a firearm point at any part of your body or at another person. This is particularly important when loading or unloading a firearm. In the event of an accidental discharge, no injury can occur as long as the muzzle is pointing in safe direction. A safe direction means a direction which will not permit a discharged bullet to strike a person, or to strike an object from which the bullet may ricochet. 27 RUGER® INSTRUCTION MANUAL READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM.
A safe direction must take into account the fact that a bullet may penetrate a wall, ceiling, floor, window, etc., and strike a person or damage property. Make it a habit to know exactly where the muzzle of your gun is pointing whenever you handle it, and be sure that you are always in control of the direction in which the muzzle is pointing, even if you fall or stumble. Keep your finger off the trigger until you are ready to shoot. 3. FIREARMS SHOULD BE UNLOADED WHEN NOT IN USE. Firearms should be loaded only when you are in the field or on the target range or shooting area, ready to shoot. Firearms and ammunition should be securely locked in racks or cabinets when not in use. Ammunition should be safely stored separate from firearms. Store your firearms out of sight of visitors and children. It is the gun owner’s responsi- bility to be certain that children and persons unfamiliar with firearms cannot gain access to firearms, ammunition, or components. 4. BE SURE THE BARREL IS CLEAR OF OBSTRUCTIONS BEFORE SHOOTING. Even a bit of mud, snow or excess lubricating oil or grease in the bore may cause the barrel to bulge, or even burst on firing, and can cause injury to the shooter and bystanders. Be sure that you are using ammunition of the proper caliber and loading for the gun you are using. If the report or recoil on firing seems weak, or doesn’t seem quite right, CEASE FIRING IMMEDIATELY, unload your firearm, and check to be sure that no obstruction has become lodged in the barrel. Never try to shoot an obstruction out! 28 2 13
5. BE SURE OF YOUR TARGET BEFORE YOU SHOOT. Don’t shoot unless you know exactly where your bullet is going to strike. Be sure of the bullet stop behind your target, even when dry-firing with an unloaded gun. If you are in the field hunting, do not fire at a movement or noise. Take the time to be absolutely certain of your target before you pull the trigger. 6. WEAR SHOOTING GLASSES AND HEARING PROTECTORS WHEN YOU SHOOT. All shooters should wear protective shooting glasses and adequate hearing protection when shooting. Exposure to shooting noise can damage hear- ing, and adequate eye protection when shooting is essential. 7. NEVER CLIMB A TREE OR FENCE WITH A LOADED FIREARM. Put the firearm down carefully before climbing a fence, and unload it before climbing or descending a tree or jumping over a ditch or other obstruction. Never pull or push a loaded firearm toward yourself or another person. When in doubt, or whenever you are about to do any- thing awkward, unload your gun! 29
8. DON, T SHOOT AT A HARD SURFACE, OR AT WATER. Bullets can glance off many surfaces like rocks or the surface of water and travel in unpredictable directions with considerable velocity. 9. NEVER TRANSPORT A LOADED FIREARM. Firearms should always be unloaded before being moved or placed in a vehicle. A suitable carrying case or scabbard should be used to carry an unloaded firearm to and from the shooting area. 10. AVOID ALCOHOLIC BEVERAGES WHEN SHOOTING. Don’t drink until the day’s shooting is over. Handling firearms while under the influence of alcohol in any form, or medications that could affect your judgment or co-ordination, con- stitutes a criminal disregard for the safety of others. 30