Ruger P89DAO Double Action Only Instructions Manual

TO REASSEMBLE
1.Be certain chamber and magazine are empty.
2. With slide held upside down, replace barrel and push it rearward into its
locked position.
3. Replace guide rod and recoil spring assembly (the smaller diameter end of
spring against collar) into position. Rear end of guide rod seats against barrel
lug. Barrel link must be in vertical (hole showing) position, or pistol cannot
be reassembled.
4. Be certain that ejector is locked in its lower (forward) position and that ham-
mer is in its fired...

Pinned Base(used on 10 round 9mm magazines) - Use a punch to remove the
roll pin that extends through the side of the magazine body. Once the roll pin
has been removed, pull the magazine base from the bottom of the magazine
body, taking care to prevent the forcible ejection of the compressed magazine
spring. Withdraw the magazine spring from the magazine body. Turn the maga-
zine upside down and remove the follower.
Snap-On Base- Use a punch to press in on the magazine spring seat where it
protrudes into...

3. Using powder solvent on a clean patch or bristle brush, remove powder
residue from all components of the mechanism. After cleaning, run a dry
patch through the bore, then follow with a patch that is very lightly oiled.
Wipe all surfaces clean with cloth, then wipe all surfaces with a patch or cloth
that has been very lightly oiled.
4.NOTE:Only a light application of oil is needed to provide adequate lubrica-
tion of moving parts and to prevent rust. Excess accumulations of oil tend to
attract...

24
Store the pistol’s frame and the barrel/slide assembly in different locations. When
disassembled in this manner, this pistol is inoperable. It is impossible to fire the
pistol until the barrel/slide assembly and frame have been correctly reassembled.
To reassemble the pistol for firing, carefully slide the barrel/slide assembly onto
the frame. Align the disassembly marks on the frame and slide, and then push
the slide stop pin fully into the receiver from the left. Either reinsert an empty
magazine or...

SHIPPING FIREARMS FOR REPAIR:
RUGER®P-SERIESpistols returned to the factory for services or repair
should be sent to: Sturm, Ruger & Company, Inc., Product Service Department,
200 Ruger Road, Prescott, AZ 86301-6181. Telephone (928)778-6555.
Guns should be sent prepaid. W
e will not accept collect shipments.
The Federal Gun Control Act, as well as the laws of most States and localities, do
not prohibit an individual (who is not otherwise barred from purchasing or pos-
sessing a firearm) from shipping a...

ORDERING PARTS
Please contact the Arizona Product Service Department for parts availability and
current prices. All parts orders for the RUGER®P-SERIES pistols should
be sent to: Sturm, Ruger & Company, Inc., Parts Department, 200 Ruger Road,
Prescott AZ 86301-6181. We cannot comply with open account or C.O.D.
requests. Payment in the form of a check, money order, Visa or Mastercard must
accompany your order. Credit Card orders must include the account number,
expiration date and whether it is a Visa or...

27
RUGER
®
P89DAO, P91DAO, P93DAO, P94DAO & P944DAO PISTOLS
PARTS LIST
Design, prices and specifications subject to change without notice.
SPECIFY MODEL AND CALIBER WHEN ORDERING
(See Exploded Views on Pages 32, 33 & 34)
Part Name Part No. Model
* Barrel Assembly – 9mm KV00613-150 P89DAO
* Barrel Assembly – .40 Auto KV00616-100 P91DAO
* Barrel Assembly – 9mm KV00618-100 P93DAO
* Barrel Assembly – 9mm KV00619-100 P94DAO
* Barrel Assembly – .40 Auto KV00620-100 P944DAO
Barrel Link, Not Illustrated KV00750...

28
Part Name Part No. Model
Firing Pin KV01127 P94DAO, P944DAO
* Firing Pin Block KV02103 P89DAO, P91DAO
* Firing Pin Block KV02102 P93DAO, P94DAO, P944DAO
Firing Pin Block Spring KQ05600 All Models
Firing Pin Plunger KH05100 All Models
Firing Pin Spring KV01850 All Models
Firing Pin Stop KV01550 P91DAO
Firing Pin Stop KV01554 P89DAO, P93DAO, P94DAO, P944DAO
Front Sight, Must Be Drilled For Cross Pin V03203 All Models
Front Sight Cross Pin, 2 Req’d. V04700 All Models
Grip Panel Screw, 2 Req’d. V01300 All...

29
Part Name Part No. Model
Hammer Spring Seat, With Lanyard Loop V02402 All Models
Hammer Spring Seat, Without Lanyard Loop V02400 All Models
Hammer Spring Seat Pin KV02550 All Models
Hammer Strut V01610 All Models
Hammer Strut Pin KV05150 All Models
Magazine, Complete, 10-Shot Capacity P-15/10 P89DAO
†† Magazine, Complete, 10-Shot Capacity P-18/10 P89DAO††, P93DAO, P94DAO
†† Magazine, Complete, 10-Shot Capacity P-17/10 P89DAO††, P91DAO, P944DAO
Magazine Floor Plate, 10-Shot, Pinned V01007 P89DAO,...

30
Part Name Part No. Model
Magazine Spring, 10-Shot V03004 P944DAO
Magazine Spring, 10-Shot V03003 P89DAO, P93DAO, P94DAO
Magazine Spring, 10-Shot & 11-Shot V03000 All Models
Magazine Spring Seat V03102 All Models
Rear Sight V03301 P89DAO
Rear Sight V03307 P94DAO, P944DAO
Rear Sight Q03300 P91DAO, P93DAO
Rear Sight Lock Screw V08001 All Models
Recoil Spring V02800 P89DAO
Recoil Spring Q02810 P91DAO
Recoil Spring V02815 P93DAO
Recoil Spring V02805 P94DAO
Recoil Spring Collar V06104 P944DAO
Recoil Spring...