Ruger Mini-14 Ranch Rifle Instruction Manual

32
SIGHT ADJUSTMENT
Shooting to determine the setting of the elevation slide (aperture) should be
done from a bench rest and over a measured distance.
The rear sight is adjustable for both windage and elevation. Lateral (windage)
adjustment is made by loosening the Rear Sight Windage Lock Screw (with the
hex-head wrench provided with the rifle) until the sight base requires finger
pressure to be moved. (See illustration below). Move the sight in the direction
you wish to move the point of impact. Before...

33
SUGGESTED SIGHT
PICTURE
The front sight is aligned in the
center of the rear sight aperture
(“peep”) and the target (bullseye) is
positioned to appear as if it is
sitting on top of the front sight.
ELEVATION ADJUSTMENT:To move the bullet impact point upor down, move
the elevation slide (the “peep”) by loosening both its screws (using a small
screwdriver with a blade tip that exactlyfits the screw-head) only slightly so the
slide doesn’t move too freely. Move the slide in the direction you want the...

34
SHIPPING FIREARMS FOR REPAIR
RUGER®MINI-14®RANCH RIFLESreturned to the factory for repair
should be sent to: Sturm, Ruger & Company, Inc., Product Service Department,
411 Sunapee St., Newport, New Hampshire 03773. Telephone (603) 865-2442.
Guns should be sent prepaid. We will not accept collect shipments.
The Federal Gun Control Act, as well as the laws of most States and localities, do
not prohibit an individual (who is not otherwise barred from purchasing or
possessing a firearm) from shipping a...

35
CAUTION: A gun containing modified, broken, malfunctioning,
or badly worn parts should not be fired.!
ORDERING PARTS
Please contact the New Hampshire Product Service Department for parts
availability and current prices. All parts orders for the RUGER®MINI-14®
RANCH RIFLEshould be sent to: Sturm, Ruger & Co., Inc., Product Service
Department, 411 Sunapee Street, Newport, New Hampshire 03773, 603-865-
2442. We cannot comply with open account or C.O.D. orders. Payment in the
form of a check, money order,...

36
RUGER
®
MINI-14
®
RANCH RIFLE
PARTS LIST
Design, prices and specifications subject to change without notice.
SPECIFY MODEL WHEN ORDERING
(See Exploded View on Page 41)
Part Name Part No. Model
* Barrel, Specify Model & Serial Number 0M8001 Mini-14 Ranch - Blued Model
* Barrel, Specify Model & Serial Number K0M8001 Mini-14 Ranch - Stainless Models
* Bolt Assembly MS11001 Mini-14 Ranch - Blued Model
* Bolt Assembly KMS11001 Mini-14 Ranch - Stainless Models
Bolt Lock Cover Plate MS06700 Mini-14 Ranch -...

37
Part Name Part No. Model
Ejector Bolt Stop MS03210 Mini-14 Ranch - Blued Model
Ejector Bolt Stop KMS03210 Mini-14 Ranch - Stainless Models
Extractor MS01400 Mini-14 Ranch - Blued Model
Extractor KMS01400 Mini-14 Ranch - Stainless Models
Extractor Plunger KMS01600 All Mini-14 Ranch Models
Extractor Spring MS01500 All Mini-14 Ranch Models
* Firing Pin KMS01103A All Mini-14 Ranch Models
Forearm Liner & Stock Cap Assembly MS02200 Mini-14 Ranch - Blued Model
Forearm Liner & Stock Cap Assembly KMS02200...

Part Name Part No. Model
Hammer Spring KMS04700 All Mini-14 Ranch Models
Hammer Strut MS01800 Mini-14 Ranch - Blued Model
Hammer Strut KMS01800 Mini-14 Ranch - Stainless Models
Hammer Strut Assembly MS01800A Mini-14 Ranch - Blued Model
Hammer Strut Assembly KMS01800A Mini-14 Ranch - Stainless Models
Handguard Assembly, Fiberglass MFH All Mini-14 Ranch Models
Magazine, Complete, 5-Shot Capacity MAG/5 All Mini-14 Ranch Models
Magazine Bottom MS03400 All Mini-14 Ranch Models
Magazine Bottom Retainer MS02600...

Part Name Part No. Model
Rear Sight Windage Lock Screw MS05710 All Mini-14 Ranch Models
Recoil Pad D06315 Mini-14 Ranch - Stainless, Synthetic Stock Model
Safety Assembly MS13800A Mini-14 Ranch - Blued Model
Safety Assembly KMS13800A Mini-14 Ranch - Stainless Models
Safety Detent Spring KMS04900 All Mini-14 Ranch Models
Safety Spring Retaining Pin MS06200 Mini-14 Ranch - Blued Model
Safety Spring Retaining Pin KMS06200 Mini-14 Ranch - Stainless Models
Scope Ring Clamp D-74 All Mini-14 Ranch Models
Scope...

40
Part Name Part No. Model
Sling Swivel, Rear MS07601 Mini-14 Ranch - Blued Model
Sling Swivel, Rear KMS07600 Mini-14 Ranch - Stainless Models
Stock, Wood With Butt Plate Attached MS00400 Mini-14 Ranch - Blued & Stainless, Wood Stock Models
Stock Assembly, Synthetic MS30426 Mini-14 Ranch - Stainless, Synthetic Stock Model
Stock Reinforcement MS00700 Mini-14 Ranch - Blued Model
Stock Reinforcement KMS00700 Mini-14 Ranch - Stainless, Wood Stock Model
Stock Reinforcement Lock Washer, MS08000 Mini-14 Ranch...

41
RUGER®MINI-14®RANCH RIFLE 
EXPLODED VIEW
MFH
KMS02200
MS30426
D-82 C-96SM D-80SB
KMS07600D06315
B-91
SYNTHETIC STOCK
MODEL