Ruger Gp100 Instruction Manual
Have a look at the manual Ruger Gp100 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 48 Ruger manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
22 SIGHTS The GP100 revolver is provided with an insert front sight. To change the front sight, depress the spring-loaded plunger in the front of the barrel rib with a small punch and lift rear of sight blade. The adjustable rear sight has a white outline blade. Each click of the rear sight adjustment screws (either windage or elevation) will move the point of impact of the bullet approximately 3/4” at a distance of 25 yards. Move the rear sight in the direction you desire the bullet to move on the target. RIGHT LEFT LEFTRIGHT To raisepoint of impact: turn screw counterclockwise. To lower point of impact: turn screw clockwise. To move the point of impact to the right: turn screw counterclockwise. To move the point of impact to the left : turn screw clockwise. SUGGESTED SIGHT PICTURE Top of front sight even with top of rear sight blade. Front sight centered in notch of rear sight blade. Target bullseye centered on top of front sight. UP DOWNUPDOWN ELEVATIONWINDAGE
23 SERVICE AND PARTS POLICY If you have any question with regard to the performance of your RUGER® GP100®revolver, please write or call (603-865-2442) our Newport, New Hampshire Product Service Department, fully describing all circumstances and conditions involved. If you should return your revolver to the factory for repair, or order parts for it, please comply with the following suggestions for prompt service: SHIPPING FIREARMS FOR REPAIR RUGER®GP100®revolvers returned for repairs should be sent to : Sturm, Ruger & Company, Inc., Product Service Department, 411 Sunapee Street, Newport, New Hampshire 03773, Telephone: (603) 865-2442. Revolvers must be shipped prepaid. We will not accept collect shipments. The Federal Gun Control Act, as well as the laws of most States and localities, do not prohibit an individual (who is not otherwise barred from purchasing or possessing a firearm) from shipping a firearm directly to the manufacturer for repair. However, before shipping your revolver to us, be certain your State or locality does not have a law or regulation which will prohibit you from receiving your revolver from us after it has been repaired. If such receiving is prohibited, then please have a Federally Licensed Firearms dealer ship the gun to us. If your gun is sent to us by a dealer, it will be returned to him after being repaired. If a handgun is shipped by an individual who does not hold a Federal Firearms License, it must be shipped via U.P.S. (Next Day Air) Persons who do not hold a Federal Firearms License are prohibited by Federal law from shipping a handgun by mail. Handguns mailed in violation of the law are impounded by the Post Office. Please do not send your holster, custom grip panels, or others accessories with any revolver being shipped to us. DO NOT SEND GUN BOXES OR LITERATURE THAT YOU CONSIDER TO BE COLLECTOR’S ITEMS – THESE ARE INVARIABLY DAMAGED OR DESTROYED IN SHIPMENT. Enclose a letter which includes your name, address, telephone number, and serial number and model of the firearm. Describe the trouble you have experienced with your revolver, or the work you wish to have done. Merely saying that the revolver “needs repair” is inadequate information. State precisely what is wrong. Please enclose copies of any previous correspondence. Work performed will bear a net minimum labor charge of $20.00 plus a $20.00 shipping and handling charge. The charge for metal refinishing is $50.00 plus a $20.00 shipping and handling charge. WARNING–BEFORE SHIPPING ANY FIREARM, BE ABSOLUTELY CERTAIN THAT IT AND ITS CYLINDER ARE UNLOADED. DO NOT SHIP CARTRIDGES WITH A FIREARM. !
It is the purchaser’s responsibility to be absolutely certain that any parts ordered from the factory are correctly fitted and installed. Firearms are complicated mechanisms and IMPROPER FITTING OF PARTS MAY RESULT IN A DANGEROUS MALFUNCTION, DAMAGE TO THE FIREARM, AND SERIOUS INJURY TO THE SHOOTER AND OTHER PERSONS. The purchaser and installer of parts must accept full responsibility for the correct adjustment and functioning of the revolver after such installation. PARTS MUST FIT CORRECTLY 24 !WARNING – PARTS PURCHASERS ORDERING PARTS Please contact the New Hampshire Product Service Department for parts availability and current prices. All parts orders for the RUGER®GP100® revolvers should be sent to : Sturm, Ruger & Co., Inc., Product Service Department, 411 Sunapee Street, Newport, New Hampshire, 03773, 603-865- 2442. We cannot comply with open account or C.O.D. orders. Payment in the form of a check, money order, Visa or MasterCard must accompany your order. Credit Card orders must include the account number, expiration date and whether it is a Visa or MasterCard account. Minimum parts order is $1.00 plus $3.50 shipping and handling charge. Order parts by Part Name and Part Number and include the entire serial number of the firearm for which the parts are being ordered. There is a minimum net labor charge of $20.00 plus $20.00 shipping and handling charge if the parts are factory fitted. All factory fitted parts are fit on an exchange basis only. We will not return the replaced parts. Barrels, cylinders, cylinder/crane assemblies and a number of other component parts must be fitted at the factory. Company policy is to proof-test and/or function fire all barrels after fitting to the receivers in which they are to be used. This procedure ensures maximum protection to our customers. The special proof-test ammunition used in this testing is sold only to bonafide firearms manufacturers and is not available to gun shops, gunsmiths, or individuals. Because it is a serial numbered part, the frame of the RUGER ®GP100® revolver is defined as a ‘firearm’ by Federal Law and is not offered for sale as a component part. Parts designated by an asterisk (*) must be factory fitted. These parts are fitted on an exchange basis only. We will not return the replaced parts. We will not return any part that is broken, malfunctioning, badly worn or has been modified. See “Warning – Parts Purchasers” above. CAUTION: A gun containing modified, broken, malfunctioning, or badly worn parts should not be fired. !
25 RUGER ®GP100 ® PARTS LIST Design, prices and specifications subject to change without notice. SPECIFY MODEL AND CALIBER WHEN ORDERING (See Exploded View on Page 31.) Part Name Part No. Model * Barrel, 3” Half Shroud, Fixed Sights T00618 GP100 - .357 cal. - Blued Models * Barrel, 3” Half Shroud, Fixed Sights KT00618 GP100 - .357 cal. - Stainless Models * Barrel, 3” Full Shroud, Fixed Sights T00612 GP100 - .357 cal. - Blued Models * Barrel, 3” Full Shroud, Fixed Sights KT00612 GP100 - .357 cal. - Stainless Models * Barrel, 4” Half Shroud, Fixed Sights T00610 GP100 - .357 & .38 Sp. cal. - Blued Models * Barrel, 4” Half Shroud, Fixed Sights KT00610 GP100 - .357 & .38 Sp. cal. - Stainless Models * Barrel, 4” Full Shroud, Fixed Sights T00613 GP100 - .357 cal. - Blued Models * Barrel, 4” Full Shroud, Fixed Sights KT00613 GP100 - .357 cal. - Stainless Models * Barrel, 4” Full Shroud, Adjustable Sights T00602 GP100 - .357 cal. - Blued Models * Barrel, 4” Full Shroud, Adjustable Sights KT00602 GP100 - .357 cal. - Stainless Models * Barrel, 4” Full Shroud, Fixed Sights KT00615 GP100 - .38 Sp. cal. - Stainless Models * Barrel, 6”, Half Shroud, Adjustable Sights T00603 GP100 - .357 cal. - Blued Models * Barrel, 6”, Half Shroud, Adjustable Sights KT00603 GP100 - .357 cal. - Stainless Models * Barrel, 6”, Full Shroud, Adjustable Sights T00601 GP100 - .357 cal. - Blued Models * Barrel, 6”, Full Shroud, Adjustable Sights KT00601 GP100 - .357 cal. - Stainless Models Cable Lock, 10”, Not Illustrated PM120A All GP-100 Models Case Only, Medium (3” - 5 1/2” Bbls.) RGC-M All GP100 Models Case Only, Large (6 1/2” - 7 1/2” Bbls.) RGC-L All GP100 Models
26 Part Name Part No. Model Center Pin Lock KE-53 All GP100 Models Center Pin Rod KT05400 All GP100 Models Center Pin Spring KT03400 All GP100 Models * Crane & Crane Pivot Assembly T00800B GP100 - Blued Models * Crane & Crane Pivot Assembly KT00800B GP100 - Stainless Models * Crane Latch T00900 GP100 - Blued Models * Crane Latch KT00900 GP100 - Stainless Models * Crane Latch Pivot KE-27 All GP100 Models Crane Latch Plunger KH05100 All GP100 Models Crane Latch Spring KE-57 All GP100 Models * Crane Pivot Lock Plunger KH06700 All GP100 Models * Crane Pivot Lock Spring KH07600 All GP100 Models * Cylinder T00100A GP100 - .357 cal. - Blued Models * Cylinder KT00100A GP100 - .357 cal. - Stainless Models * Cylinder T00101A GP100 - .38 Sp. cal. - Blued Models * Cylinder KT00101A GP100 - .38 Sp. cal. - Stainless Models Cylinder Latch KH04504 All GP100 Models * Cylinder Latch Pivot KH01400 All GP100 Models Cylinder Latch Plunger KE-51 All GP100 Models Cylinder Latch Spring KH05000 All GP100 Models * Cylinder Retaining Ball, (2 Req’d.) KE03000 All GP100 Models Disassembly Pin E-63 All GP100 Models * Ejector T01800 GP100 - Blued Models * Ejector KT01800 GP100 - Stainless Models
27 Part Name Part No. Model * Ejector Alignment Pins, (2 Req’d). KE-35 All GP100 Models * Ejector Retainer KH02400 All GP100 Models Ejector Rod H02300 GP100 - Blued Models Ejector Rod KH02300 GP100 - Stainless Models Ejector Spring KE-25 All GP100 Models * Firing Pin KH02100 All GP100 Models Firing Pin Rebound Spring KE-48 All GP100 Models Front Latch KH03100 All GP100 Models Front Latch Pivot Lock KH07500 All GP100 Models Front Latch Pivot Lock Spring KH07700 All GP100 Models Front Latch Pivot Pin H05600 GP100 - Blued Models Front Latch Pivot Pin KH05600 GP100 - Stainless Models Front Latch Spring KE-57 All GP100 Models Front Latch Spring Plunger KH06800 All GP100 Models Front Sight T03602 GP100 - All Adjustable Sight Models Front Sight T03606 GP100 - All Fixed Sight Models Front Sight Cross Pin, Not Illustrated KE-70 GP100 - All Fixed Sight Models Front Sight Plunger H07900 GP100 - Blued Adjustable Sight Models Front Sight Plunger KH07900 GP100 - Stainless Adjustable Sight Models Front Sight Plunger Spring KH08000 GP100 - All Adjustable Sight Models Grip Ferrule, (Left) T01201 GP100 - All Adjustable Sight Models Grip Ferrule, (Right) T01101 GP100 - All Adjustable Sight Models Grip Ferrule, (Left) W01015 GP100 - All Fixed Sight Models Grip Ferrule, (Right) W01014 GP100 - All Fixed Sight Models
28 Part Name Part No. Model Grip Panel Locator T03301 All GP100 Models Grip Panel Inserts, Wood (Sold In Pairs Only) T21007 GP100 - All Adjustable Sight Models Grip Panel Inserts, Wood (Sold In Pairs Only) WI GP100 - All Fixed Sight Models Grip Panel Screw KE-13 GP100 - All Adjustable Sight Models Grip Panel Screw KW01300 GP100 - All Fixed Sight Models Grip, 1 Piece Rubber, No Inserts T01014 GP100 - All Adjustable Sight Models Grip, 1 Piece Rubber, No Inserts, T01010 GP100 - All Fixed Sight Models Grip, 1 Piece Rubber with Wood Inserts T21000-CS GP100 - All Adjustable Sight Models Grip, 1 Piece Rubber with Wood Inserts T21010-CS GP100 - All Fixed Sight Models * Hammer KT04000A All GP100 Models * Hammer Dog KH01900 All GP100 Models Hammer Dog Pivot Pin KE-22 All GP100 Models Hammer Dog Plunger KH05100 All GP100 Models Hammer Dog Spring KE-57 All GP100 Models Hammer Pivot Assembly E-16A GP100 - Blued Models Hammer Pivot Assembly KE-16A GP100 - Stainless Models Hammer Strut KT01500 All GP100 Models Hammer Strut Mainspring KW00401 All GP100 Models Hammer Strut Seat KT00500 All GP100 Models Pawl KT00700 All GP100 Models Pawl Plunger KH05100 All GP100 Models Pawl Plunger Spring KH05000 All GP100 Models Rear Sight Base MR15900C GP100 - All Adjustable Sight Models Rear Sight Blade, Low (White Outline Notch), E05904A-A GP100 - All Adjustable Sight Models Not Illustrated
29 Part Name Part No. Model Rear Sight Blade, High (White Outline Notch) H07203 GP100 - All Adjustable Sight Models Rear Sight Cross Pin MR05600 GP100 - Blued Adjustable Sight Models Rear Sight Cross Pin KMR05600 GP100 - Stainless Adjustable Sight Models Rear Sight Elevation Screw MR05902 GP100 - All Adjustable Sight Models Rear Sight Elevation Spring, (2 Req’d.) MR05906 GP100 - All Adjustable Sight Models Rear Sight Windage Adjustment Screw E05903 GP100 - All Adjustable Sight Models Rear Sight Windage Spring MR05907 GP100 - All Adjustable Sight Models Rear Sight, Complete Assembly H05900D GP100 - All Adjustable Sight Models * Recoil Plate MR02000 GP100 - Blued Models * Recoil Plate KMR02000 GP100 - Stainless Models * Recoil Plate Cross Pin E-49 GP100 - Blued Models * Recoil Plate Cross Pin KE-49 GP100 - Stainless Models Transfer Bar KT01700 All GP100 Models * Trigger KT03900B All GP100 Models * Trigger Guard T00300 GP100 - Blued Models * Trigger Guard KT00300 GP100 - Stainless Models Trigger Guard Latch KT04600 All GP100 Models Trigger Guard Latch Pin KE-22 All GP100 Models Trigger Guard Latch Spring KT03800 All GP100 Models Trigger Link KT07100 All GP100 Models Trigger Link Pin KH06400 All GP100 Models
30 Part Name Part No. Model Trigger Link Plunger KT03700 All GP100 Models Trigger Pivot Pin KE02800 All GP100 Models Trigger Plunger KH03200 All GP100 Models * PARTS SO MARKED MUST BE FACTORY FITTED