Roland XJ 740 User Manual

89Chapter 5 Feature Reference
5-7 Setting How the Auxiliary Drying Unit Operates
When the optionally available auxiliary drying unit is installed, use the setting menus on the machine to set how the
drying unit operates. For detailed information about the auxiliary drying unit, refer to the users manual for drying unit.
Switching the Drying-heater Unit On and Off
Procedure
Hold down and press.
Press
twice.
Press.
Use
to select ENABLE or DISABLE.
Press
.
Press.
Press
to go back to the original screen....

90Chapter 5 Feature Reference
5-8 Saving the Printer Settings to Match the Media
Saving Optimized Media Settings As Preset Values
Procedure
Press.
Press.
Press
.
Press.
Use
to select any one from NAME1 to NAME8.
Press
to save.
The present menu settings are saved in the preset you chose in step .
Press.
Press
to go back to the original screen.
Description
Using the [PRESET] menu item lets you easily change a wide variety of settings to optimize them for the media.
Making changes for each menu item...

Chapter 5 Feature Reference91
5-8 Saving the Printer Settings to Match the Media
Loading a Saved Preset
Procedure
Press.
Press twice.
Use
to select the name of a preset you want to load.
Pressto load.
The settings are changed and the screen shown in the figure appears.
Description
This loads a saved preset. You can select any one of eight types of presets. (When no names have been assigned, you
select from among NAME1 through NAME8.)
If you load a preset while
is illuminated,goes dark. To start...

92Chapter 5 Feature Reference
5-9 Making the Network Settings
Setting the IP Address, Subnet Mask, Etc.
Procedure
Press.
Press
several times.
Press.
Press
.
Press.
Use
to choose the item whose setting you want to make.
Presstwice.
Use
to select the address number.
	Press.

Repeat  and 	 to set all the address numbers.
When you have finished making the setting, press
.
Press.
Press
to go back to the original screen.
Description
Make sure the machine is connected to the network by an Ethernet cable....

93Chapter 5 Feature Reference
5-10 Viewing Information about the Media and the System
Displaying the Amount of Media Remaining
Procedure
Press.
Press
.
Press.
Press
.
Press.
Use
to set the amount of media remaining.
Press
to enable the setting.
Press.
Press
to go back to the original screen.
Description
You can display how much of the media in use is left. Once you set the amount of media remaining, the amount
remaining is displayed at the top menu until it reaches zero. If you cancel the setup such...

Chapter 5 Feature Reference94
5-10 Viewing Information about the Media and the System
Description
Setting this to ENABLE automatically displays the [SHEET REMAIN] menu item whenever you change the media and
finish setup. This makes it impossible to go on to the next operation unless you redo the setting for the amount
remaining. This can be useful for keeping you from forgetting to redo the setting when you change the media.
When you set this to ENABLE, however, be sure also to set the [SHEET TYPE] menu...

Chapter 5 Feature Reference95
5-10 Viewing Information about the Media and the System
Viewing the Serial Number, Firmware Version, and Other Information
Procedure
Press.
Press
several times.
Press.
Use
to choose the information you want to view.
Press.
Press.
Press
to go back to the original screen.
Description
You can view the following information.
[MODEL]: Model name
[SERIAL NO.]: Serial number
[INK]: Ink type
[FIRMWARE]: Firmware version
Viewing the Network Settings
Procedure
Press.
Press...

96Chapter 5 Feature Reference
5-11 Performing Maintenance
Draining Ink and Performing Internal Washing
Procedure
Press.
Press
several times.
Press.
Press
twice.
Press.
Press
twice.
Press
to execute.
Description
This drains the ink inside the printer and washes the interior using cleaning cartridges as a preliminary for moving the
printer or conducting maintenance. This operation requires eight unused cleaning cartridges. The screen displays
information such as instructions to insert and remove...

Chapter 5 Feature Reference97
5-11 Performing Maintenance
Downloaded From ManualsPrinter.com Manuals 

98Chapter 5 Feature Reference
5-12 Menu List
Main Menu
MENU
PRESETPRESET
LOAD
PRESET
SAVE
LOAD
NAME1
LOAD
NAME2
  To [SHEET REMAIN]  To [NAME]
LOAD
NAME4
LOAD
NAME6
  To [NAME8]
  To [NAME1]
SAVE
NAME1
SAVE
NAME2
SAVE
NAME4
SAVE
NAME6
  To [NAME8]
  To [NAME1]
Continued Continued
Press 
LOAD
NAME3
LOAD
NAME5
LOAD
NAME7
LOAD
NAME8
SAVE
NAME3
SAVE
NAME5
SAVE
NAME7
SAVE
NAME8
Continued
 P. 90
 P. 91
Downloaded From ManualsPrinter.com Manuals