Roland XJ 640 User Manual

							89Chapter 5 Feature Reference
5-7 Setting How the Auxiliary Drying Unit Operates
When the optionally available auxiliary drying unit is installed, use the setting menus on the machine to set how the
drying unit operates. For detailed information about the auxiliary drying unit, refer to the users manual for drying unit.
Switching the Drying-heater Unit On and Off
Procedure
Hold down and press.
Press
twice.
Press.
Use
to select ENABLE or DISABLE.
Press
.
Press.
Press
to go back to the original screen.
Description
This switches the auxiliary drying units drying-heater unit on or off.
The temperature setting for the drying-heater unit is based on the setting made on the machine. After youve com-
pleted installation of the auxiliary drying unit, set the machines [OPTION DRYER] menu item to ENABLE.
Default Setting
[OPTION DRYER]: DISABLE
Switching the Blower-fan Unit On and Off
Procedure
Hold downand press.
Press
.
Press.
Use
to select ENABLE or DISABLE.
Press
.
Press.
Press
to go back to the original screen.
Description
This switches the auxiliary drying units blower-fan unit on or off. After youve completed installation of the auxiliary
drying unit, set the machines [BLOWER FAN] menu item to ENABLE.
Default Setting
[BLOWER FAN]: DISABLE
HEATER MENU
OPTION DRYER
OPTION DRYER
DISABLE     ENABLE
W 1839mm
SETUP SHEET
      ROLL
W 1839mm
SETUP SHEET
      ROLL
HEATER MENU
BLOWER FAN
BLOWER FAN
DISABLEENABLE
Downloaded4From4ManualsPrinteracom4Manuals 
						

							90Chapter 5 Feature Reference
5-8 Saving the Printer Settings to Match the Media
Saving Optimized Media Settings As Preset Values
Procedure
Press.
Press.
Press
.
Press.
Use
to select any one from NAME1 to NAME8.
Press
to save.
The present menu settings are saved in the preset you chose in step .
Press.
Press
to go back to the original screen.
Description
Using the [PRESET] menu item lets you easily change a wide variety of settings to optimize them for the media.
Making changes for each menu item every time you change the media can be troublesome. Thats why it can be useful
to save the menu-item settings optimized for an often-used type of media as a preset. The next time you use the media,
you can change the menu-item settings to the optimal values for the media simply by loading the preset you saved.
Menu items that can be saved in presets are listed on the below.
You can save up to eight presets. You can assign a name to each preset. Using media names may aid recognition and
clarity.
 P. 91, Loading a Saved Preset, p. 91, Assigning a Name to a Preset
MENU
PRESET
PRESET
SAVE
SAVE
NAME1
W 1839mm
SETUP SHEET
      ROLL
Menu item Page to see
[ADJUST BI-DIR SIMPLE SETTING] P. 82, Correcting for Misalignment in Bidirectional Printing
[ADJUST BI-DIR DETAIL SETTING] P. 83, Correcting for Misalignment in Bidirectional Printing More Precisely
[ALTERNATE HEAD] P. 78, Giving Priority Efficient Ink Use During Operation
[BLOWER FAN] P. 89, Switching the Blower-fan Unit On and Off
[CALIBRATION] P. 85, Performing Feed Correction to Alleviate Horizontal Bands and the Like
[FEED FOR DRY] P. 88, Drying the Trailing Edge of the Printing Area on the Dryer
[FULL WIDTH S] P. 74, Speeding Up Printing for Narrow Media
[MEDIA RELEASE] P. 75, Using Sticky Media
[PRE], [PRINT], [DRYER] P. 34, Making the Temperature Setting for the Media Heating System
[PREHEATING] P. 87, Determining How the Media Heating System Operates
[SCAN INTERVAL] P. 73, Printing Hard-to-dry Media
[SHEET TYPE],  [SHEET WIDTH],
[SHEET POS.]P. 71, Using Transparent Media
[SIDE MARGIN] P. 70, Expanding the Printing Area by Reducing the Margins
[VACUUM POWER] P. 73, Preventing Media from Coming Loose
Downloaded From ManualsPrinter.com Manuals 
						

							Chapter 5 Feature Reference91
5-8 Saving the Printer Settings to Match the Media
Loading a Saved Preset
Procedure
Press.
Press twice.
Use
to select the name of a preset you want to load.
Pressto load.
The settings are changed and the screen shown in the figure appears.
Description
This loads a saved preset. You can select any one of eight types of presets. (When no names have been assigned, you
select from among NAME1 through NAME8.)
If you load a preset while
is illuminated,goes dark. To start printing, pressonce more and redo
the preparations for printing.
Assigning a Name to a Preset
Procedure
Press.
Press
.
Press
twice.
Press.
Use
to select any one from NAME1 to NAME8.
Press.
Use
to enter a character.
Press.
Use
to enter the next character.
Enter the following characters in the same way.
When youre finished entering text, press
.
	Press.
Press
to go back to the original screen.
Description
This assigns a name to a saved preset. Using media names may aid recognition and clarity.
The characters you can enter are A through Z, 0 through 9, and the - character. You can enter up to 15
characters, including spaces.
MENU
PRESET
LOAD
NAME1
SETUP SHEET
      ROLL
PRESET
NAME
NAME
NAME1
NAME
S_
NAME
SAMPLE_
W 1839mm
SETUP SHEET
      ROLL
Downloaded4From4ManualsPrinteracom4Manuals 
						

							92Chapter 5 Feature Reference
5-9 Making the Network Settings
Setting the IP Address, Subnet Mask, Etc.
Procedure
Press.
Press
several times.
Press.
Press
.
Press.
Use
to choose the item whose setting you want to make.
Presstwice.
Use
to select the address number.
	Press.

Repeat  and 	 to set all the address numbers.
When you have finished making the setting, press
.
Press.
Press
to go back to the original screen.
Description
Make sure the machine is connected to the network by an Ethernet cable.
For detailed information about the settings, consult your network administrator.
[IP ADDRESS]: IP address
[SUBNET MASK]: Subnet mask
[GATEWAY ADDR.]: Gateway address
W 1839mm
SETUP SHEET
      ROLL
MENU
SYSTEM INFO.
SYSTEM INFO.
NETWORK
IP ADDRESSS
000 . 000 . 000 . 000
IP ADDRESS
192 . 168 . 000 . 003
IP ADDRESS
192 . 000 . 000 . 000
NETWORK
IP ADDRESS
Downloaded4From4ManualsPrinteracom4Manuals 
						

							93Chapter 5 Feature Reference
5-10 Viewing Information about the Media and the System
Displaying the Amount of Media Remaining
Procedure
Press.
Press
.
Press.
Press
.
Press.
Use
to set the amount of media remaining.
Press
to enable the setting.
Press.
Press
to go back to the original screen.
Description
You can display how much of the media in use is left. Once you set the amount of media remaining, the amount
remaining is displayed at the top menu until it reaches zero. If you cancel the setup such as by removing the media ,
the amount remaining at that time flashes on the screen.
The amount of media remaining is not updated automatically when you change the media. Redo the setting whenever
you change the media.
You can also make the setting display this menu item automatically whenever you change the media. See the next
section, Verifying the Setting for the Amount Remaining Every Time the Media Is Changed.
Note: The remaining amount that is displayed is only an estimate, and its accuracy is not assured.
Verifying the Setting for the Amount Remaining Every Time the Media Is Changed
Procedure
Press.
Press
.
Press.
Press
twice.
Press.
Use
to select ENABLE.
Press
to enable the setting.
Press.
Press
to go back to the original screen.
SETUP SHEET
      ROLL            L 25.0 m
MENU
SHEET REMAIN
SHEET REMAIN
SET LENGTH
SET LENGTH
0.0 m     25.0 m
W 1839 mm      L 25.0 m
MENU
SHEET REMAIN
SHEET REMAIN
AUTO DISPLAY
AUTO DISPLAY
DISABLE     ENABLE
This display is updated.
If setup has not been performed,
the set value flashes.
W 1839mm
SETUP SHEET
      ROLL
Downloaded4From4ManualsPrinteracom4Manuals 
						

							Chapter 5 Feature Reference94
5-10 Viewing Information about the Media and the System
Description
Setting this to ENABLE automatically displays the [SHEET REMAIN] menu item whenever you change the media and
finish setup. This makes it impossible to go on to the next operation unless you redo the setting for the amount
remaining. This can be useful for keeping you from forgetting to redo the setting when you change the media.
When you set this to ENABLE, however, be sure also to set the [SHEET TYPE] menu item to OPAQUE. When the
[SHEET TYPE] menu item is set to OPAQUE, then the [SHEET REMAIN] menu item is not displayed automatically,
regardless of the setting for the [AUTO DISPLAY] menu item.
 P. 71, Using Transparent Media
Default Setting
[AUTO DISPLAY]: DISABLE
Printing the Amount of Remaining Media
Procedure
Press.
Press
.
Press.
Press
to perform printing.
Press.
Press
to go back to the original screen.
Description
This prints the amount of media remaining that is displayed at the top menu. You use this when you want to make a
record of the remaining length of the media now in use. Printing the amount of media remaining before you change
the media enables you to refer to the printed record and use the value to make the setting for the remaining amount the
next time you use the media.
Printing a System Report
Procedure
Press.
Press
several times.
Press.
Press
several times.
Press
to start printing.
Press.
Press
to go back to the original screen.
Description
This prints system information, including a list of setting values.
SHHET REMAIN
PRINT MEMO
MENU
SHEET REMAIN
W 1839 mm      L 25.0 m
W 1839mm
SETUP SHEET
      ROLL
MENU
SUB MENU
SUB MENU
SYSTEM REPORT
Downloaded4From4ManualsPrinteracom4Manuals 
						

							Chapter 5 Feature Reference95
5-10 Viewing Information about the Media and the System
Viewing the Serial Number, Firmware Version, and Other Information
Procedure
Press.
Press
several times.
Press.
Use
to choose the information you want to view.
Press.
Press.
Press
to go back to the original screen.
Description
You can view the following information.
[MODEL]: Model name
[SERIAL NO.]: Serial number
[INK]: Ink type
[FIRMWARE]: Firmware version
Viewing the Network Settings
Procedure
Press.
Press
several times.
Press.
Press
.
Press.
Use
to choose the information you want to view.
Press.
	Press.
Press
to go back to the original screen.
Description
You can view the following information.
[IP ADDRESS]: IP address
[SUBNET MASK]: Subnet musk
[GATEWAY ADDR.]: Gateway address
[MAC ADDRESS]: MAC address
W 1839mm
SETUP SHEET
      ROLL
MENU
SYSTEM INFO.
SYSTEM INFO.
SERIAL NO.
SERIAL NO.
ZS00001
MENU
SYSTEM INFO.
SYSTEM INFO.
NETWORK
NETWORK
IP ADDRESS
IP ADDRESS
192 . 168 . 000 . 003
W 1839mm
SETUP SHEET
      ROLL
Downloaded4From4ManualsPrinteracom4Manuals 
						

							96Chapter 5 Feature Reference
5-11 Performing Maintenance
Draining Ink and Performing Internal Washing
Procedure
Press.
Press
several times.
Press.
Press
twice.
Press.
Press
twice.
Press
to execute.
Description
This drains the ink inside the printer and washes the interior using cleaning cartridges as a preliminary for moving the
printer or conducting maintenance. This operation requires eight unused cleaning cartridges. The screen displays
information such as instructions to insert and remove cartridges. Follow these instructions to carry out the procedure.
After finishing washing, the sub power is switched off.
You do not need to carry this out as part of your daily maintenance activities.
Draining Ink Remaining Inside the Machine
Procedure
Press.
Press
several times.
Press.
Press
twice.
Press.
Press
.
Press
to execute.
Description
This removes ink inside the printer as a preliminary procedure for performing maintenance. The screen displays infor-
mation such as instructions to insert and remove cartridges. Follow these instructions to carry out the procedure. After
finishing the procedure, the sub power is switched off.
You do not need to carry this out as part of your daily maintenance activities.
MENU
SUB MENU
MENU
SUB MENU
SUB MENU
INK CONTROL
INK CONTROL
HEAD WASH
INK CONTROL
PUMP UP
SUB MENU
INK CONTROL
Downloaded4From4ManualsPrinteracom4Manuals 
						

							Chapter 5 Feature Reference97
5-11 Performing Maintenance
Downloaded From ManualsPrinter.com Manuals 
						

							98Chapter 5 Feature Reference
5-12 Menu List
Main Menu
MENU
PRESETPRESET
LOAD
PRESET
SAVE
LOAD
NAME1
LOAD
NAME2
  To [SHEET REMAIN]  To [NAME]
LOAD
NAME4
LOAD
NAME6
  To [NAME8]
  To [NAME1]
SAVE
NAME1
SAVE
NAME2
SAVE
NAME4
SAVE
NAME6
  To [NAME8]
  To [NAME1]
Continued Continued
Press 
LOAD
NAME3
LOAD
NAME5
LOAD
NAME7
LOAD
NAME8
SAVE
NAME3
SAVE
NAME5
SAVE
NAME7
SAVE
NAME8
Continued
 P. 90
 P. 91
Downloaded From ManualsPrinter.com Manuals