Roland XC 540 User Manual

							6-7 Correcting Misalignment for Printing or Cutting
109Chapter 6 Feature Reference
Description
Depending on the composition of the media, the positioning of printing and cutting may be misaligned even when
youre using crop marks. Make corrections for misaligned printing and cutting for the media youre using.
Default Setting
[FEED SETTING]: 0.0 mm
[SCAN SETTING]: 0.0 mm
Downloaded From ManualsPrinter.com Manuals 
						

							110Chapter 6 Feature Reference
6-8 Setting How the Media Heating System Operates
Switching Off the Preheater, Print Heater, or Dryer
Procedure

Press  twice.
Use 
 to select the device.
Press 
 several times to select [OFF].
Press 
 to enable the setting.
Press .
Press 
 to go back to the original screen.
Description
This makes the temperature settings for the media heating system (preheater, print heater, and dryer), as well as
switching these devices on or off. When this is set to [OFF], these devices do not operate at all.
You can also make this setting on the computer. When youve made the setting on the computer, the computers
setting takes precedence and the printers setting is ignored.
Default Setting
[PRE] (preheater): 35˚C (95˚F)
[PRINT] (print heater): 40˚C (95˚F)
[DRYER]: 50˚C(122˚F)
W  1346mm
SETUP    SHEET
        ROLL
PRE 40OFF40
Downloaded From ManualsPrinter.com Manuals 
						

							6-8 Setting How the Media Heating System Operates
111Chapter 6 Feature Reference
Determining How the Media Heating System Operates
Procedure

Hold down  and press .
Press .
Press .
Use 
 to make the setting.
Press 
 to enable the setting.
Press .
Press 
 to go back to the original screen.
Description
This feature comtrols the temperature of the media heating system automatically when  is dark.
[MENU] performs heating to the preset temperature at all times, without lowering the temperature when the 
is dark.
[30˚C] lowers the media heating system to a fixed temperature (30˚C) when 
 is dark.
[OFF] switches off the media heating system when
 is dark.
Default Setting
[PREHEATING]: 30˚C
W  1346mm
SETUP    SHEET
        ROLL
HEATER MENU
FEED FOR DRY
HEATER MENU
PREHEATING
PREHEATING
30  CMENU
Downloaded From ManualsPrinter.com Manuals 
						

							112Chapter 6 Feature Reference
6-9 Setting How the Auxiliary Dryer Operates
Switching the Drying-heater Unit On and Off
Procedure

Hold down  and press .
Press 
 twice.
Press .
Use 
 to select ENABLE or DISABLE
Press 
.
Press .
Press 
 to go back to the original screen.
Description
This switches the optional drying-heater unit on or off.
The machine settings govern the temperature setting for the drying-heater unit, so when installation is complete, set
[OPTIONAL DRYER] on the machine to ENABLE.
Default Setting
[OPTION DRYER]: DISABLE
HEATER MENU
OPTION DRYER
OPTION DRYER
DISABLEENABLE
W  1346mm
SETUP    SHEET
        ROLL
Downloaded From ManualsPrinter.com Manuals 
						

							6-9 Setting How the Auxiliary Dryer Operates
113Chapter 6 Feature reference
Switching the Optional Blower-fan Unit On and Off
Procedure

Hold down  and press .
Press 
.
Press .
Use 
 to select ENABLE or DISABLE
Press 
.
Press .
Press 
 to go back to the original screen.
Description
This switches the blower-fan unit on or off.
When the blower-fan unit is installed, set [BLOWER FAN] to ENABLE.
Default Setting
[BLOWER FAN]: DISABLE
W  1346mm
SETUP    SHEET
        ROLL
HEATER MENU
BLOWER FAN
BLOWER FAN
DISABLEENABLE
Downloaded From ManualsPrinter.com Manuals 
						

							114Chapter 6 Feature Reference
6-10 Saving the Printer Settings to Match the Media
Saving Optimized Media Settings As Preset Values
Procedure

Press .
Press .
Press 
.
Press .
Use
 to select any one from NAME1 to NAME8.
Press 
 to save.
The present menu settings are saved in the preset you chose in step 

Press .
Press 
  to go back to the original screen.
Description
Using the [PRESET] menu lets you easily change a wide variety of settings to optimize them for the media.
Making changes for each menu item every time you change the media can be troublesome. Thats why it can be useful
to save the menu-item settings optimized for an often-used type of media as a preset. The next time you use the media,
you can change the menu-item settings to the optimal values for the media simply by loading the
preset you saved. Menu Items That can be saved in presets shown on the next page.
MENU
PRESET
PRESET
SAVE
SAVE
NAME1
W  1346mm
SETUP    SHEET
        ROLL
Downloaded From ManualsPrinter.com Manuals 
						

							6-10  Saving the Pinter Settings to Match the Media
115Chapter 6 Feature reference
Menu Items That Can Be Saved in Presets
[PRE] (Pre heater)
[PRINT] (Print heater)
[DRYER]
 P.36 Settings of the Media Heating System
[EDGE DETECTION]
 P.86 Using Transparent Media
[SCAN INTERVAL]
 P.86 Printing Hard-to-dry Media
[VACUUM POWER]
 P.87 Preventing Media from Coming Loose
[FULL WIDTH  S]
 P.88 Speeding Up Output for Narrow Media
[FEED FOR DRY]
 P.93 Drying the Trailing Edge of the Printing Area on the Dryer
[ALTERNATE HEAD]
 P.94 Giving Priority to Image Quality
[CALIBRATION]
(in the CUTTING MENU)
 P.97 Performing Distance Correction During Cutting
[FORCE]
[SPEED]
[OFFSET]
[UP-SPEED]
 P.98 Fine-tuning the Cutting Conditions
[ADJUST BI-DIR SIMPLE SETTING]
 P.100 Correcting for Misalignment in Bidirectional Printing
[ADJUST BI-DIR DETAIL SETTING]
 P.101Correcting for Misalignment in Bidirectional Printing
More Precisely
[CALIBRATION]
 P.103 Performing Feed Correction to Alleviate Horizontal
Bands and the Like
[PRINT-CUT ADJ.]
 P.104 Correcting Misalignment of the Printing and Cutting
Positions During Printing Followed Immediately by Cutting
Up to eight types of preset can be saved. You can assign a name to each ones so that using media names may aid
recognition and clarity.
 P.116 Loading a Saved Preset, P.116 Assigning a Name to a Preset
[CROP-CUT ADJ.]
 P.107 Correcting Misalignment for Printing and Cutting When
Using Crop Marks
[PREHEATING]
 P.111 Determining How the Media Heating System Operates
[BLOWER FAN]
 P.113 Switching the Optional Blower-fan Unit On and Off
Downloaded From ManualsPrinter.com Manuals 
						

							6-10 Saving the Printer Settings to Match the Media
116Chapter 6 Feature Reference
Loading a Saved Preset
Procedure

Press .
Press  twice.
Use 
 to select the name of a preset you want to load.
Press  to load.
The settings are changed and the screen shown in the figure appears.
Description
This loads a saved preset. You can select any one of eight types of presets. (When no names have been assigned, you
select from among NAME1 through NAME8.)
If you load a preset while
 is illuminated, goes dark. To start printing, press once more and
redo the preparations for printing.
Assigning a Name to a Preset
Procedure

Press .
Press 
.
Press 
 twice.
Press .
Use 
 to select any one from NAME1 to NAME8.
Pres  twice.
Use 
 to enter a character.
Press .
Use 
 to enter the next character.
Enter the following characters in the same way.
When youre finished entering text, press .
Press .
Press 
 to go back to the original screen.
Description
This assigns a name to a saved preset. Using media names may aid recognition and clarity.
The characters you can enter are A through Z, 0 through 9, and the - character. You can enter up to 15
characters, including spaces.
MENU
PRESET
LOAD
NAME1
PRESET
NAME
NAME
NAME1
NAME
S_
NAME
SAMPLE_
W  1346mm
SETUP    SHEET
        ROLL
SETUP    SHEET
        ROLL         
Downloaded From ManualsPrinter.com Manuals 
						

							117Chapter 6 Feature Reference
6-11 Making the Network Settings
Setting IP address, Subnet mask, etc.
Procedure

Press .
Press 
 several times.
Press .
Press 
.
Press .
Use 
 to choose the item whose setting you want to
make.
Press  twice.
Use 
 to select the address number.
Press .
Repeat  and  to set all the address numbers.
When you have finished making the setting, press
.
Press .
Press 
 to go back to the original screen.
Description
Make sure the machine is connected to the network by an Ethernet cable.
For detailed information about the settings, consult your network administrator.
[IP ADDRESS]: IP address
[SUBNET MASK]: Subnet mask
[GATEWAY ADDRESS]: Gateway address
W  1346mm
SETUP    SHEET
        ROLL
MENU
SYSTEM INFO .
SYSTEM INFO .
NETWORK
IP ADDRESSS
000.000.000.000
IP    ADDRESS
1  9  2 .  1  6  8 .         0 .  0  0  3
IP ADDRESS
192.000.000.000
NETWORK
IP ADDRESS
Downloaded From ManualsPrinter.com Manuals 
						

							118Chapter 6 Feature Reference
6-12 Viewing System Information
Viewing the Serial Number, Firmware Version, and Other Information
Procedure

Press .
Press 
 several times.
Press .
Use 
 to choose the information you want to view.
Press .
Press .
Press 
 to go back to the original screen.
Description
You can view the following information.
[MODEL]: model name
[SERIAL NO.]: serial number
[INK]: ink type
[FIRMWARE]: firmware version
Viewing the Network Settings
Procedure

Press .
Press 
 several times.
Press .
Press 
.
Press .
Use 
 to choose the information you want to view.
Press  two times.
Press .
Press 
 to go back to the original screen.
W  1346mm
SETUP    SHEET
        ROLL
MENU
SYSTEM INFO .
SYSTEM INFO .
SERIAL NO .
SERIAL NO .
ZS00001
MENU
SYSTEM INFO .
SYSTEM INFO .
NETWORK
NETWORK
IP ADDRESS
IP    ADDRESS
1  9  2 .  1  6  8 .         0 .  0  0  3
W  1346mm
SETUP    SHEET
        ROLL
Downloaded From ManualsPrinter.com Manuals