Roland FJ 740 User Manual

							Thank you very much for purchasing the product.
• To ensure correct and safe usage with a full understanding of this products performance, please be sure to read
through this manual completely and store it in a safe location.
• Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
• The contents of this operation manual and the specifications of this product are subject to change without notice.
• The operation manual and the product have been prepared and tested as much as possible.  If you find any
misprint or error, please inform us.
• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through
use of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with
respect to any article made using this product.
USER’S MANUAL
Downloaded From ManualsPrinter.com Manuals 
						

							For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO  FREQUENCY  INTERFERENCE
STATEMENT
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated
in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference
to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Unauthorized changes or modification to this system can void
the users authority to operate this equipment.
The I/O cables between this equipment and the computing
device must be shielded.
For Canada
CLASS A                    NOTICE
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
CLASSE A                   AVIS
Cet appareil numérique de la classe A respecte toutes les
exigences du Règlement sur le matériel brouilleur du
Canada.
ROLAND DG CORPORATION
1-6-4 Shinmiyakoda, Hamamatsu-shi, Shizuoka-ken, JAPAN  431-2103
MODEL NAME :See the MODEL given on the rating plate.
RELEVANT DIRECTIVE : EC LOW VOLTAGE DIRECTIVE (73/23/EEC)
EC ELECTROMAGNETIC COMPATIBILITY DIRECTIVE (89/336/EEC)
WARNING
This is a Class A product.  In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
NOTICE
Grounding Instructions
Do not modify the plug provided -  if it will not fit the outlet,
have the proper outlet installed by a qualified electrician.
Check with qualified electrician or service personnel if the
grounding instructions are not completely understood, or if in
doubt as to whether the tool is properly grounded.
Use only  3-wire extension cords that have  3-prong
grounding plugs and 3-pole receptacles that accept the tool’s
plug.
Repair or replace damaged or worn out cord immediately.
Downloaded From ManualsPrinter.com Manuals 
						

							1
Contents
Contents ........................................................................................................................... 1
Features of the FJ-540 ..................................................................................................... 4
To Ensure Safe Use ......................................................................................................... 5
About the Labels Affixed to the Unit .............................................................................................................. 8
Pour utiliser en toute sécurité ........................................................................................ 9
À propos des étiquettes collées sur lappareil ............................................................................................. 12
1. Getting Started ........................................................................................................... 13
1-1 Checking Accessories ........................................................................................................................... 14
1-2 Part Names ........................................................................................................................................... 15
1-3 Assembling and Installing ...................................................................................................................... 17
Installation Environment .......................................................................................................................................................... 17
Step 1: Assemble the Stand ...................................................................................................................................................... 18
Step 2: Install the Included Items ............................................................................................................................................. 20
Step 3: Install the Drain Bottle ................................................................................................................................................. 21
Step 4: Remove the Protective Media ...................................................................................................................................... 23
1-4 Connecting the Cables .......................................................................................................................... 24
Connecting the Power Cord ...................................................................................................................................................... 24
Connecting to the Computer ..................................................................................................................................................... 25
1-5 Switching On the Power for the First Time ........................................................................................... 27
Step 1: Install Ink Cartridges .................................................................................................................................................... 27
Step 2: Perform Ink Filling ....................................................................................................................................................... 28
2. Basic Operation ......................................................................................................... 29
2-1 Switching the Power On and Off ........................................................................................................... 30
Switching On the Power ........................................................................................................................................................... 30
Switching Off the Power at the End of the Day ....................................................................................................................... 31
2-2 Loading Media ....................................................................................................................................... 32
Loading Roll Media .................................................................................................................................................................. 32
Loading Sheet Media ................................................................................................................................................................ 35
When Loading Thick Media ..................................................................................................................................................... 36
When Loading Media That Warps Easily ................................................................................................................................ 37
Separating the Media ................................................................................................................................................................ 38
Removing the Media ................................................................................................................................................................. 38
2-3 Printing .................................................................................................................................................. 39
To Perform Printing .................................................................................................................................................................. 39
Performing a Printing Test ........................................................................................................................................................ 40
Downloading Printing Data ...................................................................................................................................................... 40
Downloaded From ManualsPrinter.com Manuals 
						

							2
3. A Wide Variety of Operations .................................................................................... 41
3-1 Replacing the Ink Cartridges ................................................................................................................. 42
Care and Handling of Ink Cartridges ....................................................................................................................................... 42
Replacing with New Ink Cartridges ......................................................................................................................................... 43
If ink runs out during printing .................................................................................................................................................. 44
3-2 Checking the Remaining Ink Level ....................................................................................................... 45
3-3 Setting the Location Where Printing Starts ........................................................................................... 46
Setting the Start Location ......................................................................................................................................................... 46
Specifying a Location in the Feed Direction ........................................................................................................................... 47
Specifying a Location in the Scan Direction ........................................................................................................................... 48
3-4 Setting the Margins ............................................................................................................................... 49
Setting the Margins in the Feed Direction ............................................................................................................................... 49
Setting the Margins in the Scan Direction ............................................................................................................................... 50
3-5 Using Transparent Media ...................................................................................................................... 52
3-6 Making Corrections for Printing ............................................................................................................. 53
Feed Correction ......................................................................................................................................................................... 53
Bidirectional Correction ........................................................................................................................................................... 54
3-7 Stopping Printing Operations ................................................................................................................ 57
Stopping Printing Operations ................................................................................................................................................... 57
Pausing Printing Operations ..................................................................................................................................................... 57
3-8 Changing the Type of Ink ...................................................................................................................... 58
3-9 When Not in Use for a Prolonged Period .............................................................................................. 60
4. Maintenance ............................................................................................................... 61
4-1 Cleaning the Printing Heads ................................................................................................................. 62
Cleaning the Printing Heads ..................................................................................................................................................... 62
If Drop-out Persists Even After Carrying Out Cleaning Several Times ................................................................................. 63
If Performing POWERFUL Cleaning Several Times Does Not Correct the Drop-out Problem ........................................... 63
4-2 Cleaning Using the Cleaning Kit ........................................................................................................... 64
4-3 Replacing the Wiper .............................................................................................................................. 67
4-4 Other Cleaning Tasks ............................................................................................................................ 68
4-5 Disposing of Discharged Ink ................................................................................................................. 69
4-6 How to Replace the Separating Knife ................................................................................................... 70
4-7 When Moving the Unit ........................................................................................................................... 71
Contents
Downloaded From ManualsPrinter.com Manuals 
						

							3
Copyright © 2002 Roland DG Corporation
SelectColorTM is trademark of Roland DG Corporation.
Other company names and product name are trademarks or registered trademarks of their respective holders.
http://www.rolanddg.com/
Contents
5. Menus and Keys ......................................................................................................... 73
5-1 Display Menus Flowchart ...................................................................................................................... 74
5-2 Description of Menus ............................................................................................................................ 78
5-3 Description of Keys ............................................................................................................................... 81
6. What to Do If... ............................................................................................................83
6-1 What to Do If... ...................................................................................................................................... 84
The machine doesnt run ........................................................................................................................................................... 84
Clean, attractive printing is impossible .................................................................................................................................... 85
The media becomes jammed .................................................................................................................................................... 88
What to Do If the Printing Carriage Does Not Operate ........................................................................................................... 89
6-2 What to Do If an Error Message Appears ............................................................................................. 91
7. Appendix .....................................................................................................................93
7-1 Specifications ........................................................................................................................................ 94
Main unit Specification ............................................................................................................................................................. 94
Interface Specifications ............................................................................................................................................................ 95
Network Interface Specifications ............................................................................................................................................. 95
7-2 Media Conditions ................................................................................................................................... 96
Usable Media ............................................................................................................................................................................ 96
Loadable Media Widths ............................................................................................................................................................ 96
7-3 Printing Area .......................................................................................................................................... 97
7-4 The Media-cutoff Location During Continuous Printing ........................................................................98
Downloaded From ManualsPrinter.com Manuals 
						

							4
Features of the FJ-540
What Is the FJ-540?
The FJ-540 is a large-format printer combining high speed with high print quality. It supports a wide variety of media
types, as well as pigment and dye-based inks.
Built-in Print Server
This machine has a built-in print server (Roland-PrintServer) as a network interface. When you use the print server, you
can send printing data to the machine from anywhere on the network.
Includes a Software Raster Image Processor (RIP)
Roland SelectColor, which is included with the machine, lets you use your computer to perform raster image processing
for printing data such as PostScript files exported from a program and output the data to the machine.
Downloaded From ManualsPrinter.com Manuals