Roku TCL TV S305 User Manual
Have a look at the manual Roku TCL TV S305 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Roku manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Page 63 More settings This section describes the features and settings of the TV that were not covered in the other parts of this guide. Changing network settings If needed, you can change your network settings at any time. For example, if you change the name of your wireless network (its SSID) or its password, you will need to change your TV’s settings so that it can continue to connect. Also, if you decided not to connect to the Internet in “Guided Setup” on page 13, you can use Network settings to connect at a later time. To change network settings, from the Home screen menu, navigate to Settings > Network, and then press the RIGHT arrow. At this point, you can choose the following options: • Update connection – Press OK to start the update process. The TV uses your current network information to reconfirm the wireless network connection, the local network connection, and the Internet connection. • Set up new connection – Press OK to start a scan for wireless networks. Follow the on-screen instructions to complete the network connection. For help with setting up a new connection, see “Setting up your TV” on page 15. Changing time settings You can change time settings to suit your preferences. You can find the following settings by navigating from the Home screen menu to Settings > System > Time: • Sleep timer – Set a time delay after which the TV will automatically shut off. This setting reflects the setting you can make in the Options menu from any TV input, as explained in “Options menu settings” on page 39. Note that the sleep timer setting is not input specific. • Time zone – Select whether to set the time zone automatically or manually, and if set manually, select your current time zone. Typically, a TV connected to the Internet can discover its own time zone automatically, and a TV that is not connected to the Internet must be set manually. Initially, this setting is made when you set up the TV tuner, as explained in “Setting up Antenna TV” on page 26. Correct time zone information is needed to correctly display program data.
Page 64 • Clock format – Select whether to display time in a 12-hour or 24-hour format, or to turn off time display. This setting is available only on TVs that are connected to the Internet. Non-connected TVs do not display the time. Scanning for broadcast TV channels again There will be times when you need to create a new channel list. For example, you: • Change cable providers • Reorient your TV antenna • Move to a different city with different channels Whenever you need to update your TV channel list, you can repeat the channel scan. Tip: Repeat the channel scan from time to time to make sure you are receiving all of the latest channels. Broadcasters add and remove channels, move channels to different parts of the spectrum, and change the power levels of their channels periodically. To repeat the channel scan, from the Home screen menu, navigate to Settings > TV inputs > Antenna TV > Scan again for channels. Then select Start finding channels to begin the channel scan process. The screens and options that appear during this process are identical to those described in “How do I set up the TV tuner?” on page 26. Using the TV in a home theater Your TV has several features that make it an ideal TV for a home theater. But you might not notice them because they remain in the background until you decide to use them. Turning off the speakers When you use your TV with a sound bar or an external amplifier and speakers, you’ll probably want to turn off the internal TV speakers. To turn off the TV’s built-in speakers, in the Home screen menu, navigate to Settings > Audio > TV speakers and change the setting. Tip: The TV’s internal speakers can be enabled and disabled automatically as needed by system audio control, as described in “Enabling system audio control” on page 67. The internal speakers are also turned off when you use the headphone jack.
Page 65 Changing the audio mode The TV has two audio modes, accessed by navigating in the Home screen menu to Settings >Audio > Audio mode: • Stereo – Use this setting for internal speakers, headphones, and external stereo amplifiers connected through HDMI® ARC, SPDIF optical, or headphone jack. • Auto – Use this setting to automatically detect the best audio setting based on the audio stream in the content you are watching. If you have connected the TV to an external Dolby Audio™ compatible amplifier, receiver, or sound bar through HDMI® ARC or SPDIF optical, the TV automatically selects the appropriate surround sound capabilities of the device based on the characteristics of the current program. Setting up a digital audio connection You can connect the TV to an external amplifier, receiver, or sound bar by using either of these two connections: • HDMI ARC – The HDMI® Audio Return Channel enables the TV to output digital audio on one of its HDMI® connectors. The connected amplifier can also function simultaneously as an input source to the TV, if needed. To use the ARC capability, you must connect an HDMI® cable from your amplifier’s HDMI® ARC connector to the HDMI ARC connector on the TV. You also must: o Be sure your HDMI® cable is certified by HDMI®. o Enable HDMI ARC under Settings > System > Control other devices (CEC), as explained in “Enabling HDMI® ARC” on page 66. • SPDIF optical – The TV has an SPDIF optical connector that outputs a digital audio signal. To use the optical output, connect a TOSLINK optical cable from the amplifier to the Optical or SPDIF connector on the TV. Note: Dolby Audio™ supporting Dolby Digital Plus™ format is not available through the SPDIF optical output. This format is only available through the HDMI® ARC connection. After making the required HDMI® ARC or SPDIF optical connection, go to Settings > Audio > S/PDIF and ARC option and select the audio format to use. Note: In most cases, Auto detect is the best option. Other settings can result in no sound when the content you are viewing does not contain the audio stream type you selected.
Page 66 Controlling other devices through CEC Consumer Electronics Control (CEC) enables your TV and other CEC-compatible home entertainment components to control one another in various ways. First, the CEC-compatible devices must “discover” one another and report their capabilities. After this, one device can control another according to the features you enable. For example, playing a disc on a Blu-ray player could switch the TV to the Blu-ray player’s input. Or, powering off the TV could also power off the Blu-ray player and the home theater receiver. Discovering connected CEC devices To discover CEC devices: 1. Make sure that your CEC-compatible components are connected to the TV with a suitable High Speed HDMI® cable that supports HDMI® ARC and CEC control. 2. Turn on each component and make sure all components are CEC enabled. Tip: Some manufacturers have their own branded names for CEC functionality, so you might need to read the product documentation to correctly identify the CEC features of the device. 3. On the TV’s Home screen menu, navigate to Settings > System > Control other devices (CEC) and then select Search for CEC devices. Press OK to repeat the discovery process, if necessary. When finished, the TV displays a list of CEC devices that are connected to each HDMI® input, as well as any devices that had previously been connected. The TV remembers the names of multiple CEC devices even when they are no longer connected. If the list is longer than the allowed space, press Þ to see a complete list in a scrollable window. Enabling HDMI® ARC HDMI® ARC is the audio return channel that is available on one of the TV’s HDMI® ports. The audio return channel enables you to send a Dolby Audio™ signal back to a home theater receiver that is also sending an audio and video signal into the TV. Using HDMI® ARC reduces the number of cables needed and optionally lets you control the volume and mute state of the receiver by enabling system audio control. HDMI® ARC is disabled by default. To enable HDMI® ARC, in the Home screen menu, navigate to Settings > System > Control other devices (CEC), and then highlight HDMI ARC. Press OK to enable or disable the feature. Note: Enabling HDMI ARC also enables System audio control. After enabling HDMI ARC, you can disable System audio control if you prefer.
Page 67 Enabling system audio control System audio control enables the TV remote control to change the volume and mute state of an amplifier or sound bar connected through HDMI®, and to display the external device’s volume and mute status in the TV’s on-screen display. The TV automatically turns off its internal speakers and sends volume and mute control signals to an external amplifier when all of the following are true: • System audio control is enabled on the TV. • The TV is connected to a CEC-compatible amplifier, it is powered on, and CEC discoverability is enabled. • The CEC-compatible amplifier’s HDMI® ARC connector is connected to the TV’s HDMI ARC connector with a suitable HDMI® cable. When the CEC-compatible amplifier is off, the TV automatically turns on its speakers (unless you have turned them off as described in “Turning off the speakers” on page 64) and resumes local control of volume and mute state. To enable or disable system audio control, in the Home screen menu, navigate to Settings > System > Control other devices (CEC) and highlight System audio control. Press OK to enable or disable the feature. Enabling 1-touch play 1-touch play enables a component to control which TV input is active. For example, pressing Play on your Blu-ray player switches the TV to the Blu-ray input. 1-touch play is disabled by default. To enable 1-touch play, in the Home screen menu, navigate to Settings > System > Control other devices (CEC) and highlight 1-touch play. Press OK to enable or disable the feature. Enabling system standby The system standby feature causes other components to power off when you power off your TV. Depending on the CEC System Standby implementation, it also might enable connected components to power off your TV when you power off the component. System standby is disabled by default. To enable system standby, in the Home screen menu, navigate to Settings > System > Control other devices (CEC) and highlight System standby. Press OK to enable or disable the feature.
Page 68 Restarting the TV You can restart the TV when necessary. Restarting has the same effect as unplugging the TV power and then plugging it in again. To restart the TV, navigate to Settings > System > Power, and then select System restart. Highlight Restart, and then press OK to confirm restart. While the TV restarts, the screen goes dark for a few seconds, and then displays the startup screen for a few more seconds. When the restart operation completes, the TV displays the activity you selected in “Power on settings” on page 52. Resetting the TV You can choose to reset only the TV picture and audio settings to their original values, or perform a full factory reset to return the TV to the state it was in when you first unpacked and turned it on. Reset audio/video settings To reset only the TV picture and audio settings to their original values, navigate to Settings > System > Advanced system settings > Factory reset, and then highlight Reset TV audio/video settings. Read the information on the screen to make sure you understand what the reset operation does. To proceed with the reset operation, press PLAY/PAUSE three times in a row. Factory reset everything A full factory reset returns the TV’s settings to their original state and removes all personally identifiable information from the TV. When finished, you must repeat Guided Setup, reconnecting to the Internet, re-linking your Roku account, and reloading any streaming channels. You also must repeat Antenna TV setup and input configuration. Factory reset is the recommended choice if you want to transfer the TV to another owner, and it is the only choice if you want to switch from store mode to home mode (if you inadvertently selected store mode during Guided Setup). To perform a factory reset, navigate to Settings > System > Advanced system settings > Factory reset, and then highlight Factory reset everything. Read the information on the screen to make sure you understand what this reset operation does.
Page 69 To proceed with the full factory reset, use the on-screen number pad to enter the code displayed on the screen, and then select OK to proceed. When the factory reset operation completes, the TV restarts and displays the first Guided Setup screen. What if I can’t access the Factory Reset option? It is possible that your TV might get into a state where you cannot access the various menus, including the menu option that lets you perform a factory reset operation. If that happens, you can force the TV to reset by following these steps: 1. Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on the TV connector panel. 2. Continue to hold the RESET button for approximately 12 seconds. When the reset cycle completes, the status indicator comes on dim. 3. Release the RESET button. The TV is now powered off. 4. Turn on the TV and proceed through Guided Setup. See “Setting up your TV” on page 15. Network connection reset If you want to remove your network connection information without disturbing other settings, navigate from the Home screen to Settings > System > Advanced systems settings, and then select Network connection reset. When you select this option, the TV removes your wireless network information, including the name of the connection (its SSID) and your wireless password, if any, and then it restarts. After restarting, your TV retains all of its other settings and its association with your Roku account. After resetting your network connection, navigate from the Home screen to Settings > Network > Set up new connection to continue enjoying all of the benefits of your connected TV. Changing your Roku Channel Store PIN preference When you created your Roku account, you were given the opportunity to create a PIN code and to specify when it must be used. If you created a Channel Store PIN and want to change it, or you don’t remember your PIN, or if you didn’t create a Channel Store +PIN and want to add one, you can easily make these changes.
Page 70 1. On a computer, tablet, or smartphone, use your web browser to go to https://my.roku.com. 2. Enter your email address and password to sign in. After signing in, the My Account page appears. 3. Under PIN Preference, click Update to open the Choose Your PIN Preferences page. 4. Skip this step if you just want to change your PIN. Otherwise, choose the option you prefer from among those listed: • Require a PIN to make purchases or to add any item from the Channel Store. • Require a PIN to make purchases. • Do not require a PIN to make purchases. 5. If you choose either of the first two options, enter your PIN twice in the appropriate boxes. 6. Click Save Changes to save your changes and return to the My Account page. Note that your current setting is described under PIN Preference. Getting system updates If your TV is connected to the Internet and linked with a Roku account, it will automatically get updates from time to time. You don’t need to do anything. But if you are aware that an update is available and you don’t want to wait until the TV updates itself, you can manually check for updates. If your TV is not connected to the Internet, you can still get updates by using a USB flash drive. You can download an updated User Guide that matches your Roku TV software version from the TCL web site at: http://tclusa.helpjuice.com/26914-home-theater-current-models To determine your current Roku TV software version, go to Settings > System > About, and then press OK or navigate to the right. Checking for updates on a connected TV If you’re one of those people who has to have the latest, most up-to-date features the moment they are available, you can check for updates as often as you want. To check for updates, navigate to Settings > System > System update, and then select Check now. The TV responds either with a message saying that your TV is up to date, or with a message saying that an update is available. Follow the instructions on the screen to install the system update.
Page 71 Note: Sometimes system updates install new system software, and other times they install new features for streaming channels. Therefore, you won’t always see a change in the behavior of your TV after a system update. Getting updates on a non-connected TV If your TV is not connected to the Internet, you can still get system updates by using a USB flash drive and a computer with an Internet connection. To get a system update, navigate to Settings > System > System update: The System update screen on a non-connected TV gives you the opportunity to connect your TV to the Internet to automatically receive updates. We recommend this option if it is possible in your situation. To proceed, select Connect to the Internet and follow the instructions in “But what if I didn’t connect my TV?” on page 25. Otherwise, if you can’t connect to the Internet, select I can’t connect, and then follow the instructions on the screen. Here’s a summary: 1. On an Internet-connected computer, go to the web site displayed on the System update screen. 2. On the USB Update web page, select the correct brand and model, and then click Next. 3. Click Download Software, and then save the file to the root folder of a standard USB flash drive. 4. When the download finishes, take the USB flash drive to the TV and plug it into the USB port. When you do, the TV validates the files on the flash drive and displays a 12-digit code. 5. Write down the code and the web address, and take this information back to your Internet-connected computer. USB flash drive Any normal USB flash drive will work, provided it has a FAT-16 or FAT-32 file system format. (This is the default for most flash drives.) The size of the download is small—usually less than 100 MB—and so will fit on any size flash drive you might have.
Page 72 6. On the 12-digit code page, enter the code your TV displayed, and then click Next. 7. On the 6-digit code page, write down the 6-digit code that appears, and then take it back to your TV. 8. Using the TV remote control, select Next to move to the next screen, and then use the on-screen keyboard to enter the 6-digit code. When finished, select OK. The system update begins. Do not remove the USB flash drive until the TV restarts. When the update finishes, the TV restarts. You can check the new version number by navigating to Settings > System > About. 12- and 6-digit codes The USB update process uses a pair of codes to validate that you are authorized to install an update, and to ensure you are not attempting to install an old, unsupported version of the system software.