Roku TCL TV 49S405 User Manual

 
  Page 35  
  
Surf all channels again 
You can switch back to all channels whenever you’re watching the Antenna TV input. 
1. Press the LEFT arrow to display the channel list.  
2. Press the LEFT or RIGHT arrow once to switch to All channels. Notice that the words All 
channels appear at the top of the channel list. 
3. Highlight a channel and press OK to select one of the channels in the All channels list, or wait a 
few moments until the channel list disappears. 
4. Press the UP or DOWN button on...

 
  Page 36  
  
Viewing program information 
To view information about the current program, press OK. The TV displays a banner at the bottom of the 
screen with as much information as is available in the program data stream, as shown in the following 
example. 
 
Program information banner 
Program information, subject to availability within the broadcast information, includes: 
 Channel number 
 Channel call sign 
 Favorite channel icon  
 Signal strength 
 Program title 
 Start time, end time,...

 
  Page 37  
  
Tip: If you’ve set up Live TV Pause and you’re watching broadcast TV, you’ll also see a progress bar 
showing the current playback position within the rolling 90-minute pause time. For more 
information, see Pausing Live TV. 
Adjusting settings 
Press  to display the Options menu. Press the UP and DOWN arrows to highlight an option, and then 
press the LEFT and RIGHT arrows to change the setting. Adjusting TV settings explains each of the 
settings in detail. 
Pausing Live TV 
Using...

 
  Page 38  
  
Enabling Live TV Pause 
You can enable Live TV Pause in several ways: 
 Go to Settings > TV inputs > Antenna TV > Live TV Pause, and then select Enable. 
 After completing a channel scan, select Set up Live TV Pause from the available options. 
 Press the Play/Pause button on the Roku remote while watching a digital broadcast TV channel. 
 Highlight the Antenna TV tile on the Home screen, press  on the remote control, and then 
select Enable Live TV Pause. 
After starting Live TV...

 
  Page 39  
  
Whenever you use any of the Live TV Pause features, the TV momentarily displays a progress bar: 
 
6. Time at current playback position. 
7. Current playback position 
8. Extent of pause time, representing the amount of time this channel has been buffered, up to 90 
minutes. 
9. 90 minute mark, representing the maximum extent of pause time. 
10. Current time. 
The progress bar also displays tick marks at each half hour point, to help you locate the boundaries 
where one show ends and a...

 
  Page 40  
  
More Ways to Watch (select models only) 
More Ways to Watch is available only on select TV models in the United States. To determine whether 
your TV has this feature, from the Home screen, press the UP or DOWN arrow to highlight Settings, and 
then examine the Settings menu for a More Ways to Watch option. 
More Ways to Watch gives you recommendations about the shows you’re watching on the Antenna TV, 
HDMI, or AV input. Before you can get these recommendations, you must opt into More...

 
  Page 41  
  
Opting in to More Ways to Watch 
More Ways to Watch uses Automatic Content Recognition (ACR) technology to collect information 
about what you watch through your Antenna TV, or on devices like media players and cable boxes 
connected to the HDMI or AV inputs. Opting in to More Ways to Watch means that you give permission 
to analyze the programs you watch for the purpose of making recommendations, as well showing ads 
that are more relevant to you.  
More Ways to Watch is disabled when...

 
  Page 42  
  
Disable More Ways to Watch 
If you decided you want to disable More Ways to Watch, follow these steps: 
1. From the Home screen, go to Settings > More Ways to Watch.  
2. Navigate to the right to highlight Enable More Ways to Watch. 
3. Press OK on the remote control to clear the check box. 
Disable Auto Notifications 
If you want to keep More Ways to Watch enabled, but you do not want to see notifications popping up 
while you are watching shows, you can disable notifications. To do so,...

 
  Page 43  
  
 If you miss the notification, you can check the program information banner that appears when 
you press OK while watching a TV channel, HDMI, or AV source. If your TV has suggestions, 
you’ll see the More Ways to Watch notification in the banner.  
 
Regardless of which  More Ways to Watch prompt appears, press the RIGHT arrow to see available 
options, if any. The options you’ll see depend on the type of show you’re watching and the available 
ways there are to watch, so you might see...

 
  Page 44  
  
If there are more providers than will fit in the initial More Ways to Watch screen, select See all 
providers to see the full list: 
 
Switching TV inputs 
Switch to a TV input to access the device connected to that input, for example, a Blu-ray™ player. 
Switching inputs is as simple as highlighting the input’s tile in the Home screen, and pressing OK. The 
video signal on the input, if any, appears on the screen. 
Tip: To learn how to add, remove, rename, and rearrange the tiles on...