Ricoh Wg5 User Manual

209
8Using the GPS
Calibration is the process of making adjustments to a device in order to obtain 
accurate information. Always calibrate the electronic compass before using it.
1Use the four-way controller (23) to select [Electronic 
Compass] in the [ WSetting] menu.
2Press the four-way controller ( 5) twice.
The [Calibration] screen appears.
3Wrap the strap around your wrist so you do not drop the 
camera, and then rotate the camera at least 180 degrees each 
vertically, horizontally, and laterally....

210
9Appendix
Functions Available for Each Shooting 
Mode
√: Can be set.  ×: Cannot be set.  ⎯: Settings and changes are not applied.
*The functions available for E mode are same as the ones for shooting mode you set to E (e or b).
Function Shooting Modeb
Ab Ca
 b
\  K
Zoom button Zoom operation√*2√√√√√*3√*4√
Flash Mode
,Auto√√×××××√a Flash Off√√√√√√√ √bFlash On√√√××××√c
Auto + Red-eye√√ ××××× √dFlash On + Red-eye√√√××××√Flash Off + Flash On 
(2 shots)××××××× ×
Drive Mode
9Standard√√√√×√√√gZ...

211
9Appendix
c R
B c
cQe AS 9
√√√√*3√*37√*37√*37√*4√√√√√√*5√*6√√√×××××√√√××√√
√ √√√√√√√ √√√√√√√
√√√×××××√√√√×√×
√√ ×××××× √√√××√ ×
√√××××××√√√√×√×
×× √×××××××× ××××
√×√*39√×√√√√√√√√√√
√ ×√*39√ × √ √ √ √√√√√√√
√×√*39×××××√√√××√×
√ ×√
*39√ × √ √ √ √√√√√√ ×√×√*39×××××√√√√×√×
√ √√√√√√ ×√√√√ ×√√
√√√√√√√×√√√√×√√
√ √√√√√√√ √√√√×√×
√√√√√√√×√√√√×√√
√ √√√√√√ ×√√√√√√ ×
√√√√√√√×√√√√×√×  

212
9Appendix
√: Can be set.  ×: Cannot be set.  ⎯: Settings and changes are not applied.
Function Shooting Mode
b
Ab Ca
 b
\  K
[A  Rec. 
Mode] menu Image Tone
×*8√√
×*8√√ √ ×*8Recorded Pixels√√√√√√*10×*11√Quality Level√√√√√ ×*16√√White Balance×*18√√√√√√×*18
AF 
SettingFocusing Area×*19√√√√√*20√√Auto Macro√√√√√√×√Focus Assist√√√√√
×*7√√AE Metering×*22√√√√×*22√×*22Sensitivity√√×*23×*23√*13×*23√*13√AUTO ISO Range√√×*25√*13√*13×*25√*13√EV Compensation×*27√√√√√ √ √D-Range Setting×*7√√×*7√*9√√√Shake...

213
9Appendix
c R
B c
cQeAS 9
×*8√×*8×*8√√√√√ ×*8×*8√×*8√ ×*8√√√√*10××*31×*32√*10√√√√√×*14×*15√√√ ×*16×*16×*16×*16×*16√√√√√√ ×*17×*18√×*18×*18√√√√√×*18×*18√×*18×*18×*18√√√√*20√*20√*20√*20√*20√√√√×*19√×*19√√√√√√√×√√√√×√×*21√√√ ×*7×*7×*7×*7√√√√√ ×√×*21×*22√×*22×*22×*22×*22×*22×*22√×*22×*22√×*22×*22×*22√√√ ×*23×*23×*23×*23×*23×*23√√√×*24√×*23√√√×*25×*25×*25×*25×*25×*26√√√−×*26×*25√ √√√√√√√√√√√√√ ×*27√√√√√√√√√√√√√√×*38√×*7√√ ×*7×*7√√√*33√√√√*33√*33×*35√√√√√√√×√√√√√√√
√ ×√√ ×√√ ×√√ ×√√√ ×...

214
9Appendix
Messages
Messages such as the following may appear on the display during camera 
operation.
MessageDescription
Battery depleted The battery is exhausted. Charge the battery using the 
battery charger (p.34).
Memory card full The SD Memory Card is full and no more images can be  saved.
Insert a new SD Memory Card or delete unwanted images. 
(p.39, p.136)
Change the recorded pixels or quality level of recorded 
images and try again (p.144).
Available memory on 
card is insufficient to 
copy...

215
9Appendix
Data being recordedDisplayed when you try to switch to 
Q mode while an 
image is still being recorded, or when the protect setting or 
DPOF setting is being changed. It disappears after the 
image is recorded or the setting is changed.
Data being processed Displayed when the camera takes more than five seconds 
to display an image due to image processing, or when the 
SD Memory Card or the built-in memory is being formatted.
Built-in memory full Displayed if the built-in memory is full...

216
9Appendix
Troubleshooting
ProblemCauseRemedy
The camera will 
not turn onThe battery is not installed
Check if a battery is installed. If not, 
install a battery.
The battery is installed 
incorrectly Check orientation of the battery. 
Reinsert the battery according to the 
+-
 symbols in the battery 
compartment (p.32).
The battery is exhausted Charge the battery.
No image appears 
on the display The camera is connected to 
a computer
The display is off when the camera 
is connected to a computer....

217
9Appendix
The subject is not 
in focusThe subject is difficult to 
focus on with autofocus
Lock the focus on an object the 
same distance away as the subject 
(by pressing and holding the shutter 
release button halfway), then aim 
the camera at your subject and 
press the shutter release button fully 
(p.63). Or set the focus manually 
(p.85).
The subject is not in the 
focusing area Locate the desired subject in the 
focus frame (focusing area) in the 
center of the display. If it is difficult to...

218
9Appendix
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is explained 
below.
Last Memory SettingYes : The current setting (last memory) is saved when the camera is  turned off.
No : The setting returns to the default setting when the camera is turned 
off.
* : The last memory setting depends on the [Memory] setting (p.123).
—:N/A
Reset Setting Yes : The setting returns to the default setting with the Reset...