Ricoh Wg5 User Manual

99
3Taking Pictures
The Face Detection function locates faces in the frame and automatically adjusts 
the focus and exposure for those faces. You can change the setting of the 
function so that the camera will automatically release the shutter when one or 
more of the subjects smile. The default setting is I (Face Detection On).
1Use the four-way controller ( 23) to select [Face Detection] in 
the [ A Rec. Mode] menu.
2Press the four-way controller ( 5).
A pull-down menu appears.
3Use the four-way...

100
3Taking Pictures
The LED Macro Lights around the lens blink when the camera detects people’s 
faces in   (Self-portrait Assist) or J (Self-portrait Assist + Smile Capture) 
mode. The position of the blinking LED Macro Light indicates where the detected 
face is on the screen.
The position (area) of the detected face corresponds to the blinking LED Macro 
Light as follows.
Example 1. When the camera detects a person in area 1  on the display.
Example 2. When the camera detects two people in areas 2...

101
3Taking Pictures
This specifies whether Blink Detection works when you use the Face Detection 
function. The default setting is O (On).
1Use the four-way controller ( 23) to select [Blink Detection] in 
the [ A Rec. Mode] menu.
2Use the four-way controller (45) to switch between O (On) or 
P(Off).
O(On) The Blink Detection function works.P (Off)The Blink Detection function does not work.
The setting is saved.
Use this setting to specify whether or not an Instant Review is displayed immediately 
after...

102
3Taking Pictures
2Use the four-way controller (45) to switch between  O (On) 
or  P (Off).
O (On) Instant Review is displayed.
P  (Off) Instant Review is not displayed.
The setting is saved.
You can assign one of the following functions to the Green button: [Green Mode] 
(p.71) or [Fn Setting] (p.103). You can activate the assigned function by just 
pressing the Green button.
1Use the four-way controller ( 23) to select [Green Button] in 
the [ A Rec. Mode] menu.
2Press the four-way controller ( 5).A...

103
3Taking Pictures
You can assign frequently used functions on the four-way controller. Using this 
function, you can directly set the functions by pressing the four-way controller 
without displaying the menu in capture mode.
In [Fn Setting], Still Picture Capture Mode and Movie Mode have different settings. To 
execute [Fn Setting] in Movie Mode, press the 3 button in Movie Mode and use the 
four-way controller ( 45) to display the [ ARec. Mode] menu before step 1 on  p.102.
3Use the four-way...

104
3Taking Pictures
The default settings for each mode
Items that can be assigned to each key
* The menu item to be displayed changes depending on the [Image Tone] selected in the [ A Rec. Mode] menu. When you have selected any one of 
[Bright], [Natural], [Vibrant] or [Slide Film], [Saturation] is displayed, and when 
[Monochrome] is selected, [Tone Adjustment] is displayed.
Press the Green button in capture mode to display the Fn Setting screen. Select 
an item with the four-way controller ( 2345),...

105
3Taking Pictures
You can give an image sharp or soft outlines.
1Use the four-way controller (23) to select [Sharpness] in the 
[ A  Rec. Mode] menu.
2Use the four-way controller ( 45) to change the sharpness 
level.
F Soft
G Normal
H Sharp
You can set either color brightness (Saturation) or the tone of monochrome 
images (Tone Adjustment).
The menu item to be displayed changes depending on the [Image Tone] selected 
in the [ARec. Mode] menu.
1Use the four-way controller ( 23) to select [Saturation...

106
3Taking Pictures
For setting the image contrast level.
1Use the four-way controller (23) to select [Contrast] in the 
[ A  Rec. Mode] menu.
2Use the four-way controller ( 45) to change the contrast 
level.
F Low
G Normal
H High
You can choose whether to imprint the date and/or time when taking still pictures.
1Use the four-way controller ( 23) to select [Date Imprint] on 
the [ A Rec. Mode] menu.
2Press the four-way controller ( 5).A pull-down menu appears.
3Use the four-way controller ( 23) to...

107
3Taking Pictures
You can take pictures with clearer details by using image processing with the IQ 
Enhancer technique.
1Use the four-way controller (23) to select [IQ Enhancer] in 
the [ A Rec. Mode] menu.
2Use the four-way controller ( 45) to select  O (On)/P  (Off).
O (On)  The IQ Enhancer function works
P   (Off)  The IQ Enhancer function does not work
The setting is saved.
Set whether or not to turn on the LED Macro Lights around the lens.
The LED Macro Lights turn on when the [Macro Light] is...

108
3Taking Pictures
The camera has the electronic level to detect the tilt of the camera.
When [Electronic Level] in the [A Rec. Mode] menu is set to O (On), the 
electronic level appears on the display.
The default setting is  O (On).
1Use the four-way controller ( 23) to select [Electronic Level] 
in the [ A Rec. Mode] menu.
2Use the four-way controller ( 45) to select  O (On)/P  (Off).O (On)  The electronic level is displayed.
P   (Off)  The electronic level is not displayed.
The setting is saved....