Ricoh Projector PJ X4241N User Manual

1. StandardThe projector is placed in front of a screen onto which the images are projected.
2. Rear The projector is placed behind a screen onto which the images are projected.
3. Ceiling The projector is mounted on the ceiling in front of a screen onto which the images are projected.
4. Rear Ceiling The projector is mounted on the ceiling behind a screen onto which the images are projected.
Relationship Between the Projection Distance and the Screen Size
The size of the projected image varies according...

Projection size
a
Projection distance
b
Projection height
ShortestLongest60 inches1.40 m (4.58 feet)2.13 m (6.99 feet)7 cm (3 inches)80 inches1.87 m (6.12 feet)2.86 m (9.38 feet)10 cm (4 inches)100 inches2.34 m (7.68 feet)3.58 m (11.75feet)12 cm (5 inches)120 inches2.82 m (9.24 feet)4.31 m (14.12 feet)14 cm (6 inches)150 inches3.54 m (11.60 feet)5.39 m (17.67 feet)18 cm (7 inches)200 inches4.73 m (15.50 feet)7.20 m (23.61 feet)24 cm (9 inches)RICOH PJ WX3351N
Projection size
a
Projection distance
b...

Projection sizea
Projection distanceb
Projection height70 inches0.85 m (2.78 feet)8 cm (3 inches)80 inches0.97 m (3.20 feet)10 cm (4 inches)90 inches1.10 m (3.62 feet)11 cm (4 inches)100 inches1.23 m (4.04 feet)12 cm (5 inches)110 inches1.36 m (4.46 feet)13 cm (5 inches)120 inches1.49 m (4.88 feet)14 cm (6 inches)RICOH PJ WX4241NProjection sizea
Projection distanceb
Projection height60 inches0.61 m (2.00 feet)5 cm (2 inches)70 inches0.72 m (2.35 feet)5 cm (2 inches)80 inches0.83 m (2.71 feet)6 cm (2...

Connecting Equipment to the Projector• Do not place the power cord and connection cable in a way that might cause someone to tripand fall. The machine might fall over and cause an injury.
Various equipment can be connected to the projector.
Turn off the power to any equipment before connecting it to the projector. Be sure to read the manual for
the applicable equipment before connecting it to the projector.
Connecting a Computer
• Some computers cannot be connected to the projector. Before connecting a...

Connecting to the DVI out port
To input a DVI signal to the projector, connect a DVI-to-HDMI cable to the HDMI port of the projectorand to the DVI out port of a computer. To output audio from the speaker on the projector, connect an
audio cable to the Audio In port of the projector and to the audio out port of a computer.
• You can use a DVI-to-HDMI conversion adapter instead of a DVI-to-HDMI cable.
Connecting via a network using a wired LAN
Connect an Ethernet cable to the LAN port of the projector and...

Connecting AV Equipment
Use a cable that supports the signal being input when connecting AV equipment.Connecting to the HDMI port
Connect an HDMI cable to the HDMI ports of the projector and the AV equipment.
• Some devices may not operate properly when connected using HDMI.
• Use only an HDMI cable that has the HDMI logo. To input 1080p image signals, use a high-speed HDMI cable. A conventional HDMI cable may not work properly.
Connecting to the video out port
Connect a video cable to the Video In port...

Connecting an External Display Device
You can display the projected image on another display simultaneously by connecting the projector and
the external display device. The image signals input into the Computer1 In port can be displayed on an
external display device.
To connect an external display, specify [Computer 2 Terminal] to [Output]. Then connect an RGB cable
to the Computer2 In/Monitor Out port of the projector and the RGB in port of an external display
device.
• Only the image input from a...

1. Preparations for Using the Projector
36  

2. Projecting an Image
This chapter explains the procedure for projecting an image.
Basic Operations for Using the Projector
• If [Key Lock] in [Default Settings 2] is specified as [On], you cannot operate the projector from its control panel. Use the remote control.
• If you press a button that is disabled, the projector beeps and the "Invalid operation." or "This function cannot be used on this product." message appears on the screen.
• If [Beep] in [Default Settings 1] is specified as...

The projector beeps and the indicator flashes blue.
The start-up screen is displayed.
To project an image from the connected equipment, see page 38 "Projecting an Image".
When the projector is turned on for the first time after it is purchased, the start menu appears.
Specify the display language and network settings. For details, see page 38 "When the start menu is displayed".
• Do not place anything near the power outlet.
• The password input screen is displayed if a password for the...