Ricoh Projector PJ X2240 User Manual

							39
Focus Ring
Adjusting the Projector Zoom and Focus
You may turn the zoom lever to zoom in or out. To focus the 
image, rotate the focus ring until the image is clear. 
 
RICOH PJ S2240/PJ TS100/PJ X2240/PJ X5460: Focus at 
distances from 3.94 to 39.4 feet (1.2 to 12.0 meters).
 
RICOH PJ WX2240/PJ WX5460: Focus at distances from 3.28 
to 36.1 feet (1.0 to 11.0 meters).
 
RICOH PJ HD5450: Focus at distances from 4.89 to 32.7 feet 
(1.5 to 10.0 meters).
Adjusting Projection Image Size
Zoom Lever
 
RICOH PJ S2240/PJ TS100/PJ X2240/PJ X5460: Projection 
Image Size from 30” to 300” (0.76 to 7.6 meters)
 
RICOH PJ WX2240/PJ WX5460: Projection Image Size from 
30” to 300” (0.76 to 7.6 meters)
 
RICOH PJ HD5450: Projection Image Size from 38” to 300” 
(0.97 to 7.6 meters)
Screen (H)Width
Diagonal
Height
Offset (Hd)
Screen
Projection Distance (D)
Side View
English 
English
Basic Operations
English   
						

							40
This table is for user’s reference only.
Diagonal length (inch) size of 4:3 Screen
Screen Size W x HProjection Distance (D)Offset (Hd)(m)(inch)(m)(feet)
WidthHeightWidthHeightwidetelewidetele(m)(feet)
300.60.524.018.01.21.33.94.30.070.23
400.80.632.024.01.61.85.25.70.090.30
601.20.948.036.02.42.67.88.60.140.45
701.41.156.042.02.83.19.110.00.160.52
801.61.264.048.03.23.510.411.50.180.60
901.81.472.054.03.63.911.712.90.210.67
1002.01.580.060.04.04.413.014.30.23 0.75
1202.41.896.072.04.85.215.617.20.270.90
1503.12.3120.090.05.96.619.521.50.341.13
2004.13.1160.0120.07.98.726.028.70.461.50
2505.13.8200.0150.09.9 10.932.535.80.571.88
3006.14.6240.0180.011.9 13.139.043.00.692.25
RICOH PJ S2240 /PJ TS100/ PJ X2240 / PJ X5460
RICOH PJ WX2240 / PJ WX5460
This table is for user’s reference only.
Diagonal length (inch) size of 16:10 Screen
Screen Size W x HProjection Distance (D)Offset (Hd)(m)(inch)(m)(feet)
WidthHeightWidthHeightwidetelewidetele(m)(feet)
300.70.425.415.91.01.13.3 3.60.050.16 
400.90.533.921.21.31.54.4 4.80.07 0.22
601.3 0.850.931.82.02.26.67.20.100.33
701.50.959.437.12.32.67.78.40.120.38
801.71.167.842.42.7 2.98.89.60.130.44
901.91.276.347.73.03.39.9 10.80.150.49
1002.21.484.853.03.33.711.012.00.170.55
1202.61.6101.863.64.04.413.114.40.200.66
1503.22.0127.279.55.05.516.418.00.250.82
1804.32.7169.6106.06.77.321.924.00.331.10
2005.43.4212.0132.58.39.227.430.00.421.37 
3006.54.0254.4159.010.011.032.936.00.501.64 
English
Basic Operations   
						

							41
This table is for user’s reference only.
Diagonal length (inch) size of 16:9 Screen
Screen Size W x HProjection Distance (D)Offset (Hd)(m)(inch)(m)(feet)
WidthHeightWidthHeightwidetelewidetele(m)(feet)
380.840.4733.118.6-1.5-5.00.080.25
451.000.5639.222.11.51.84.95.90.090.29
501.110.6243.624.51.72.05.46.50.100.33
601.330.7252.329.42.02.46.57.80.120.39
701.550.8761.034.32.32.87.69.20.140.46
801.771.0069.739.22.73.28.710.50.160.52
901.991.1278.444.13.03.69.811.80.180.59
1002.211.2587.249.03.34.010.913.10.200.65
1202.661.49104.658.84.04.813.115.70.240.78
1503.321.87130.773.55.06.016.319.60.300.98
2004.432.49174.398.16.68.021.826.10.401.31
3006.643.74261.5147.110.0 -32.7-0.501.96
RICOH PJ HD5450
English 
English
Basic Operations
English   
						

							42
The Projector has a multilingual On Screen Display that 
allows you to make image adjustments and change a variety of 
settings.
How to operate
1.   To open the OSD, press “Menu” on the Control Panel or Remote 
Control.
2.  When OSD is displayed, use   keys to select any item in the 
main menu. While making a selection on a particular page, press  
or “Enter” key to enter sub menu.
3.  Use   keys to select the desired item in the sub menu and press 
 or “Enter” key to view further settings. Adjust the settings by 
using   key or   key.
4.  
Select the next item to be adjusted in the sub menu and adjust as 
described above.
5.   Press “Enter”or “Menu” to confirm, and the screen will return to 
the previous menu.
6.    To exit, press “Menu” again. The OSD menu will close and the 
projector will automatically save the new settings.
Using the On Screen Display (OSD)
	If no button operation is made for 3 - 10 seconds, the OSD will be closed automatically.
Note
Sub Menu
SettingMain Menu 
English
User Settings   
						

							43
Picture
 Picture Mode
  There are many factory presets optimized for various types of 
images. Use the  or  key to select the item. 
  Bright: Mode for emphasizing brightness.
   Standard: Mode for optimizing the balance between brightness 
and color reproduction.
   Game: For game content.
  Natural: Mode for emphasizing color reproduction.
   User: User defined settings.
 Wall Color
  Use this function to obtain an optimized screen image according 
to the wall color. The available options: White/ Light Yellow/ 
Light Blue/ Pink/ Dark Green.
 Brightness
 Adjust the brightness of the image.
  Press the  key to darken image.
  Press the  key to lighten the image.
	“Sharpness”, “Saturation” and “Tint” functions are only supported under 
Video/S-Video/Composite Signal sources.
Note
English 
English
User Settings
English   
						

							44
 Contrast
  The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes the 
amount of black and white in the image.
  Press  the  key to decrease the contrast.
  Press the  key to increase the contrast.
 Sharpness
 Adjust the sharpness of the image.
  Press the  key to decrease the sharpness.
  Press the  key to increase the sharpness.
 Saturation
  Adjust the color saturation of the image.
  Press the  key to decrease the amount of color in the image.
  Press the  key to increase the amount of color in the image. 
 Tint
  Adjust the color balance of the image.
  Press the  key to adjust the image color grrenish.
  Press the  key to adjust the image color reddish. 
English
User Settings   
						

							45
	“H. Position” and “V. Position” functions 
are only supported under Computer Signal source.
Note
Screen
 Aspect Ratio
 Use this function to choose your desired aspect ratio.
   Auto: Automatically selects the appropriate display format. 
When input is 4:3, the image is displayed as 4:3. When input is 
16:9 above, the image is displayed as 16:9.
   4:3: Displays 4:3 aspect ratio.
   16:9: Displays 16:9 aspect ratio.
 Phase
  
Eliminate flicker from the image displayed. Use the  or  key to 
adjust the value. 
 Clock
   Adjust the number of total dots in one horizontal period. Use the  
or  key to adjust number to match your PC image. 
 H. Position (Horizontal Position)
 Shift the projected image position horizontally.
  Press the  key to move the image left.
  Press the  key to move the image right.
English 
English
User Settings
English   
						

							46
 V. Position (Vertical Position)
 Shift the projected image position vertically.
  Press the  key to move the image down.
  Press the  key to move the image up.
 Digital Zoom
 Adjust the digital zoom ratio of the projected image.
  Press the  key to reduce the size of an image.
  Press the  key to magnify an image on the projection screen.
 V. Keystone
 Press the  or  key to adjust image distortion vertically. If the 
image looks trapezoidal, this option can help make the image 
rectangular.
 Projection Mode
 Use this function to select the projector mode, depending upon 
how the projector is mounted.
   Front: This is the default selection. The image is projected 
straight on the screen.
   Front Ceiling: When selected, the image will turn upside down.
   Rear: When selected, the image will appear reversed.
   Rear Ceiling: When selected, the image will appear reversed in 
upside down position.
 RGB Input Range
 Adjust the color range of the HDMI image data.
   Auto: Automatically detect RGB range.
   Standard: Process the input image as standard range data.
   Full: Select this mode when computer signal or full range signal 
from AV equipment is input.
	“RGB Input Range” is only supported under HDMI source.
Note 
English
User Settings   
						

							47
Setting
 Language
 
Choose the multilingual OSD. Press “Enter” to open the sub menu 
and then use the  or  or  or  key to select your preferred 
language. Press “Enter” to finalize the selection. 
 Monitor Out (Standby)
  Enable/Disable the Monitor output function.
   On: Enable the Monitor Out function at projector standby status.
   Off: Disable the Monitor Out function at projector standby 
status.
 Network (Standby) 
  (RICOH PJ X5460 / PJ WX5460 / PJ HD5450 only)
  Enable/Disable the network function.
   On: Enable the network function at projector standby status. 
   Off: Disable the network function at projector standby status. 
	“Network (Standby)” menu option is only available on RICOH PJ X5460 / RICOH PJ WX5460/ RICOH PJ HD5450.
	“Monitor Out (Standby)” menu option is not available on RICOH PJ S2240/ RICOH PJ TS100.
Note
Note
English 
English
User Settings
English   
						

							48
 Network
(RICOH PJ X5460 / PJ WX5460 /PJ HD5450 only)
  Configure the network settings.
   Network State: Display the network connection status.
    DHCP:  Select On to allow the projector to obtain an IP address 
automatically from your network. Select Off to manually 
assign IP, Subnet Mask, Gateway and DNS configuration.
   IP Address: Set an IP address or display IP address provided 
from DHCP server when DHCP is set to On.
   Subnet Mask: Set subnet mask number or display subnet mask 
number provided from DHCP server when DHCP is set to On.
   Gateway: Set the default gateway of the network connected 
to the projector or display the default gateway of the network 
provided from DHCP server when DHCP is is set to On.
    Apply:  Select Yes to apply the changes made in network 
configuration settings.
   MAC: Display MAC address.
	“Network” menu option is only available on RICOH PJ X5460/RICOH PJ WX5460/RICOH PJ HD5450.
	Consult network administrator for network settings.
Note 
English
User Settings