Home > Ricoh > Projector > Ricoh Projector PJ WX6181N User Manual

Ricoh Projector PJ WX6181N User Manual

Here you can view all the pages of manual Ricoh Projector PJ WX6181N User Manual. The Ricoh manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 261

246
Lamp Indicator
Indicator display Projector status  Procedure
Off The lamp is turned off. –
Flashing Green Preparing to relight lamp after 
lighting has failed Wait a while.
Red Lamp replacement grace period The lamp has reached the end of its service life and is now in 
the replacement grace period (100 hours). Replace the lamp 
as soon as possible. (→ page 176)
Red (cycles of 6) Lamp does not light The lamp has not turned on. Wait at least 1 minute, then turn 
the power back on. If the lamp still...

Page 262

247
Common Problems & Solutions
(→ “Power/Status/Lamp Indicator” on page 245.)
ProblemCheck These Items
Does not turn on
or shut down • 
Check that the power cord is plugged in and that the power button on the projector cabinet or the remote control 
is on. (→ pages 15, 16)
•  Ensure that the lamp cover is installed correctly. (→ page 177)
•  Check to see if the projector has overheated. If there is insufficient ventilation around the projector or if the room 
where you are presenting is particularly...

Page 263

248
ProblemCheck These Items
Remote control does 
not work • 
Install new batteries. (→ page 12)
•  Make sure there are no obstacles between you and the projector.
•  Stand within 40 m/1575 inch of the projector. (→ page 13)
Indicator is lit or 
blinking • 
See the POWER/STATUS/LAMP Indicator. (→ page 245)
Cross color in RGB 
mode • 
Press the AUTO ADJ. button on the projector cabinet or the remote control. (→ page 26)
•  Adjust the computer image manually with [CLOCK]/[PHASE] in [IMAGE OPTION\
S] in the...

Page 264

249
If there is no picture, or the picture is not displayed correctly.
• Power on process for the projector and the PC.
  Be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to 
the notebook PC.
  In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered 
up.
NOTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information. If...

Page 265

250
❼ PC Control Codes and Cable Connection
PC Control Codes
Function Code Data
POWER ON  02H 00H 00H 00H 00H 02H
POWER OFF  02H 01H 00H 00H 00H 03H
INPUT SELECT HDMI1  02H 03H 00H 00H 02H 01H A1H A9H
INPUT SELECT HDMI2  02H 03H 00H 00H 02H 01H A2H AAH
INPUT SELECT DisplayPort  02H 03H 00H 00H 02H 01H A6H AEH
INPUT SELECT BNC  02H 03H 00H 00H 02H 01H  02H 0AH
INPUT SELECT BNC(CV)  02H 03H 00H 00H 02H 01H 06H 0EH
INPUT SELECT BNC(Y/C)  02H 03H 00H 00H 02H 01H 0BH 13H
INPUT SELECT COMPUTER  02H 03H 00H 00H...

Page 266


				            

Page 267

© 2015 Ricoh Co., Ltd. 

Page 268

Printed in China
RICOHPJ WU6181N /WX6181N /X6181N
ENUS Y076-6220A
ENGB
User’s Manual 
Start reading Ricoh Projector PJ WX6181N User Manual

Related Manuals for Ricoh Projector PJ WX6181N User Manual

All Ricoh manuals