Ricoh Projector PJ WX4152N User Manual
Here you can view all the pages of manual Ricoh Projector PJ WX4152N User Manual. The Ricoh manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 141
Item Default DLNA Certification Mode Specify whether the projector works as a DLNA-certified device. The projector is certified to DLNA 1.5 guidelines for still images. For details about the supported file types, see page 76 "Projecting Images Using DLNA-Compatible Devices".• Enable The projector works as a DLNA-certified device. Of the video files sent from the DLNA server, those files that are not DLNA compatible are shown on the file list of the Server Projection screen. • Disable The...
Page 142
Administrator Authentication Item Default Reset Administrator Password Reset the administrator password. - Reset PJLink Password Reset the PJLink password. -7. Changing the Projector Settings 140
Page 143
![Page 143
Display Status
Item
Input Displays the selected input signals.
Resolution Displays the resolution.
This item appears when you select [Computer] or [HDMI] (RGB signals) as the input signal.
Frequency Displays the synchronous frequency.
This item appears when you select [Computer] or [HDMI] (RGB signals) as the input signal.
Sync Displays the synchronous signal polarity.
This item appears when you select [Computer] as the input signal.
Signal Format Displays the Y/Pb/Pr signal format.
This item appears...](http://img.usermanuals.tech/thumb/64/100306/w300_projector_manual_9375_d-142.png "Page 143
Display Status
Item
Input Displays the selected input signals.
Resolution Displays the resolution.
This item appears when you select [Computer] or [HDMI] (RGB signals) as the input signal.
Frequency Displays the synchronous frequency.
This item appears when you select [Computer] or [HDMI] (RGB signals) as the input signal.
Sync Displays the synchronous signal polarity.
This item appears when you select [Computer] as the input signal.
Signal Format Displays the Y/Pb/Pr signal format.
This item appears...")
Display Status Item Input Displays the selected input signals. Resolution Displays the resolution. This item appears when you select [Computer] or [HDMI] (RGB signals) as the input signal. Frequency Displays the synchronous frequency. This item appears when you select [Computer] or [HDMI] (RGB signals) as the input signal. Sync Displays the synchronous signal polarity. This item appears when you select [Computer] as the input signal. Signal Format Displays the Y/Pb/Pr signal format. This item appears...
Page 144
![Page 144
Item
Current Time Displays the current time specified in [Current Time] in [Default Settings 2].
Main FW Version Displays the version of the firmware on the main board.
Interactive Version (RICOH PJ WX4152NI only) When the interactive kit is connected to the projector, the version of the interactive function is
displayed. 7. Changing the Projector Settings
142](http://img.usermanuals.tech/thumb/64/100306/w300_projector_manual_9375_d-143.png "Page 144
Item
Current Time Displays the current time specified in [Current Time] in [Default Settings 2].
Main FW Version Displays the version of the firmware on the main board.
Interactive Version (RICOH PJ WX4152NI only) When the interactive kit is connected to the projector, the version of the interactive function is
displayed. 7. Changing the Projector Settings
142")
Item Current Time Displays the current time specified in [Current Time] in [Default Settings 2]. Main FW Version Displays the version of the firmware on the main board. Interactive Version (RICOH PJ WX4152NI only) When the interactive kit is connected to the projector, the version of the interactive function is displayed. 7. Changing the Projector Settings 142
Page 145
![Page 145
8. Troubleshooting
This chapter explains the basic problems and troubleshooting methods when an indicator light is lit.
Indicator Display List The projector uses the [Power] button, indicators, and beeps to notify you if a malfunction occurs. Check
the indicator's status, and implement the following measures. " " in the table means the indicator is
flashing.
Indicator location 1. [Power] button
2. Lamp indicator
3.
Temp indicator Status
Causes Solutions
The projector does not turn
on. The...](http://img.usermanuals.tech/thumb/64/100306/w300_projector_manual_9375_d-144.png "Page 145
8. Troubleshooting
This chapter explains the basic problems and troubleshooting methods when an indicator light is lit.
Indicator Display List The projector uses the [Power] button, indicators, and beeps to notify you if a malfunction occurs. Check
the indicator's status, and implement the following measures. \" \" in the table means the indicator is
flashing.
Indicator location 1. [Power] button
2. Lamp indicator
3.
Temp indicator Status
Causes Solutions
The projector does not turn
on. The...")
8. Troubleshooting This chapter explains the basic problems and troubleshooting methods when an indicator light is lit. Indicator Display List The projector uses the [Power] button, indicators, and beeps to notify you if a malfunction occurs. Check the indicator's status, and implement the following measures. " " in the table means the indicator is flashing. Indicator location 1. [Power] button 2. Lamp indicator 3. Temp indicator Status Causes Solutions The projector does not turn on. The...
Page 146
![Page 146
Status
Causes Solutions
"Hardware Error" was
displayed, and the projector
turned off during operation. Flashing interval : 0.2
seconds
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
If the problem cannot be resolved,
contact your service
representative.
The lamp does not turn on. • The lamp has overheated
and cannot turn on.
•...](http://img.usermanuals.tech/thumb/64/100306/w300_projector_manual_9375_d-145.png "Page 146
Status
Causes Solutions
\"Hardware Error\" was
displayed, and the projector
turned off during operation. Flashing interval : 0.2
seconds
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
If the problem cannot be resolved,
contact your service
representative.
The lamp does not turn on. • The lamp has overheated
and cannot turn on.
•...")
Status Causes Solutions "Hardware Error" was displayed, and the projector turned off during operation. Flashing interval : 0.2 seconds The projector has malfunctioned. Disconnect the power cord, wait a while, and then turn on the projector again. You can also press and hold the [Power] button on the remote control or the control panel for two seconds. If the problem cannot be resolved, contact your service representative. The lamp does not turn on. • The lamp has overheated and cannot turn on. •...
Page 147
![Page 147
Status
Causes Solutions
The lamp does not turn on,
turned off during operation,
or it does not turn off. Flashing interval: 0.2
seconds
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
If the problem cannot be resolved,
contact your service
representative.
The lamp turned off during
operation, or it does not turn
on. Flashing interval: 1...](http://img.usermanuals.tech/thumb/64/100306/w300_projector_manual_9375_d-146.png "Page 147
Status
Causes Solutions
The lamp does not turn on,
turned off during operation,
or it does not turn off. Flashing interval: 0.2
seconds
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
If the problem cannot be resolved,
contact your service
representative.
The lamp turned off during
operation, or it does not turn
on. Flashing interval: 1...")
Status Causes Solutions The lamp does not turn on, turned off during operation, or it does not turn off. Flashing interval: 0.2 seconds The projector has malfunctioned. Disconnect the power cord, wait a while, and then turn on the projector again. You can also press and hold the [Power] button on the remote control or the control panel for two seconds. If the problem cannot be resolved, contact your service representative. The lamp turned off during operation, or it does not turn on. Flashing interval: 1...
Page 148
![Page 148
Status
Causes Solutions
The projector turned off
during operation, or it does
not turn on. Flashing interval: 0.2
seconds
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
If the problem cannot be resolved,
contact your service
representative.
The lamp turned off during
operation. Flashing interval: 1 second
• The interior has...](http://img.usermanuals.tech/thumb/64/100306/w300_projector_manual_9375_d-147.png "Page 148
Status
Causes Solutions
The projector turned off
during operation, or it does
not turn on. Flashing interval: 0.2
seconds
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
If the problem cannot be resolved,
contact your service
representative.
The lamp turned off during
operation. Flashing interval: 1 second
• The interior has...")
Status Causes Solutions The projector turned off during operation, or it does not turn on. Flashing interval: 0.2 seconds The projector has malfunctioned. Disconnect the power cord, wait a while, and then turn on the projector again. You can also press and hold the [Power] button on the remote control or the control panel for two seconds. If the problem cannot be resolved, contact your service representative. The lamp turned off during operation. Flashing interval: 1 second • The interior has...
Page 149
![Page 149
Status
Causes Solutions
The lamp does not turn on. Flashing interval: 1 second
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
If the problem cannot be resolved,
contact your service
representative.
The lamp turned off during
operation. Flashing interval: 1 second
The projector has malfunctioned. Disconnect the power cord, wait a
while,...](http://img.usermanuals.tech/thumb/64/100306/w300_projector_manual_9375_d-148.png "Page 149
Status
Causes Solutions
The lamp does not turn on. Flashing interval: 1 second
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
If the problem cannot be resolved,
contact your service
representative.
The lamp turned off during
operation. Flashing interval: 1 second
The projector has malfunctioned. Disconnect the power cord, wait a
while,...")
Status Causes Solutions The lamp does not turn on. Flashing interval: 1 second The projector has malfunctioned. Disconnect the power cord, wait a while, and then turn on the projector again. You can also press and hold the [Power] button on the remote control or the control panel for two seconds. If the problem cannot be resolved, contact your service representative. The lamp turned off during operation. Flashing interval: 1 second The projector has malfunctioned. Disconnect the power cord, wait a while,...
Page 150
![Page 150
Common Problems
If you think a malfunction has occurred, check the following before contacting your service
representative.
Problem
Solutions
Power does not turn on. • Make sure the power plug or connector is connected
correctly.
• Make sure the lamp cover is mounted correctly. For
details, see page 159 "Replacing the Lamp".
•
When projecting an image on the tabletop, be sure to
press the [Power] button and wait until the projector
cooling process completes before disconnecting the
power cord.
If...](http://img.usermanuals.tech/thumb/64/100306/w300_projector_manual_9375_d-149.png "Page 150
Common Problems
If you think a malfunction has occurred, check the following before contacting your service
representative.
Problem
Solutions
Power does not turn on. • Make sure the power plug or connector is connected
correctly.
• Make sure the lamp cover is mounted correctly. For
details, see page 159 \"Replacing the Lamp\".
•
When projecting an image on the tabletop, be sure to
press the [Power] button and wait until the projector
cooling process completes before disconnecting the
power cord.
If...")
Common Problems If you think a malfunction has occurred, check the following before contacting your service representative. Problem Solutions Power does not turn on. • Make sure the power plug or connector is connected correctly. • Make sure the lamp cover is mounted correctly. For details, see page 159 "Replacing the Lamp". • When projecting an image on the tabletop, be sure to press the [Power] button and wait until the projector cooling process completes before disconnecting the power cord. If...