Ricoh Projector PJ WU6181N User Manual

46
NETWORK SETTINGS
http:///index.html
• SETTINGS
WIRED
SETTINGSet for wired LAN.
APPLY Apply your settings to wired LAN.
PROFILE 1/PROFILE 2 Two settings can be set for wired LAN connection. Select PROFILE 1 or PROFILE 2. 
DISABLE Turn off wired LAN connection
DHCP ON Automatically assign IP address, subnet mask, and gateway to the projector from your DHCP 
server.
DHCP OFF Set IP address, subnet mask, and gateway to the projector assigned by your network administrator.
IP ADDRESS Set your IP address of...

47
• NAME
PROJECTOR NAMEEnter a name for your projector so that your computer can identify the projector. A projector 
name must be 16 characters or less. 
TIP: Projector name will not be affected even when [RESET] is done from the menu.
HOST NAME Enter the hostname of the network connected to the projector. A host name must be 15 or less.
DOMAIN NAME Enter the domain name of the network connected to the projector. A domain name must be 
60 characters or less.
• ALERT MAIL
ALERT MAILThis option will...

48
• NETWORK SERVICE
PJLink PASSWORDSet a password for PJLink*. A password must be 32 characters or less. Do not forget your 
password. However, if you forget your password, consult with your dealer.
HTTP PASSWORD Set a password for HTTP server. A password must be 10 characters or less.
When a password is set up, you will be prompted for your user name (arbitrary) and password 
during LOGON.
AMX BEACON Turn on or off for detection from AMX Device Discovery when connecting to the network sup-
ported by...

49
NETWORK SETTINGS
http:///index.html
• SETTINGS
WIRED or WIRELESS
SETTINGSet for wired LAN or for wireless LAN.
APPLY Apply your settings to wired LAN or wireless LAN.
DISABLE Turn off wired LAN connection
PROFILE 1/PROFILE 2 Two settings can be set for wired LAN connection. Select PROFILE 1 or PROFILE 2. 
DHCP ON Automatically assign IP address, subnet mask, and gateway to the projector from your DHCP 
server.
DHCP OFF Set IP address, subnet mask, and gateway to the projector assigned by your network...

50
SITE SURVEYDisplays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access.
NETWORK TYPE Select communication method when using wireless LAN.
INFRASTRUCTURE: Select this option when communicating with one or more equipment con-
nected to the wireless LAN network via a wireless access point.
AD HOC: Select this option when using the wireless LAN to directly communicate with a com-
puter in peer-to-peer mode. 
SECURITY TYPE Turn on or off the encryption mode for secure...

51
• NETWORK SERVICE
HTTP PASSWORDSet a password for HTTP server. A password must be 10 characters or less.
• CRESTRON
ROOMVIEW for managing from the computer.
DISABLEDisables ROOMVIEW.
ENABLE Enables ROOMVIEW.
CRESTRON CONTROL for managing from the controller.
DISABLEDisables CRESTRON CONTROL.
ENABLE Enables CRESTRON CONTROL. 
IP ADDRESS Set your IP address of CRESTRON SERVER.
IP ID Set your IP ID of CRESTRON SERVER.
TIP: The CRESTRON settings are required only for use with CRESTRON ROOMVIEW.
For more...

52
❾ Projecting Your Computer ’s Screen Image from the Projector via a 
Network [NETWORK PROJECTOR] 
By selecting the projector connected to the same network as that of your PC, the PC screen image can be projected to the screen 
via network. There is no need of connection using the computer cable (VGA).
Operation Environment
Applicable OSWindows 8/8.1 Pro
Windows 8/8.1 Enterprise
Windows 7 Professional
Windows 7 Ultimate
Windows 7 Enterprise 
Windows Vista Home Premium
Windows Vista Business
Windows...

53
• When operating with the main body, press briefly the “INPUT” button to display the [INPUT TERMINAL] screen of the on-
screen menu.
  Press the ▼ button to select [8:ETHERNET] and then press the “ENTER” button to display the application menu screen.
2. Press the SELECT ▼ or ▲ button to select [NETWORK] and press the ENTER button.
  In the screen, the [APPLICATION MENU] menu is displayed.
3. From the [APPLICATION MENU] menu, select [NETWORK PROJECTOR].
  The [PROJECTOR NAME/DISPLAY...

54
Projecting the Image with Network Projector
1. Click [Start] from the desktop of Windows 7.
2.  Click [All Programs].
3.  Click [Accessories].
4.  Click [Connect to a Network Projector].
  When the [Permission Connect to a Network Projector] window appears,click [Yes.].
  The “Connect to a Network Projector” window appears.
5. Click [→ Search for a projector (recommended)].
  In the “Available projectors” box, “WU6181N Series” is displayed.
6.  Click [WU6181N Series].
  The message “Enter the password...

55
7. Input the password to the password input box displayed by the operation at step 3 on page 53.
8. Click [Connect].
  The network projector function works and the screen of Windows 7 is projected from the projector.
• If the resolution of your computer’s screen is different from the projector’s screen resolution, the NETWORK PROJECTOR 
function may not work. If this happens, change the resolution of the computer’s screen to lower resolution than the one 
displayed at Step 3 on page 53.
NOTE: When the...