Ricoh Pentax K-3 Camera User Manual

4Playback
69
6Press F.The screen of Step 3 reappears.
7Press  E.The save confirmation screen appears.
8Select [Save to SD1] or [Save to SD2] and press 
E.
t  Memo
• Select dividing points in chronological order from the 
beginning of the movie. When canceling the selected dividing 
points, cancel each of them in reverse order (from the end of 
the movie to the beginning). In an order other than specified, 
you can neither select frames as a dividing point nor cancel 
the selections of the dividing...

4Playback
70
8Select [Save to SD1] or [Save to SD2] and press 
E.
When [Select single image] is selected, select [Continue] or 
[Exit], and press  E.
u  Caution• Only RAW images captured with this camera can be 
developed.
t  Memo• When [Select multiple images] or [Select a folder] is selected 
in Step 2, a folder with a new number is created, and the 
JPEG images are stored in the new folder.
• With the provided software “Digital Camera Utility 5”, you can  develop RAW files on a computer, 

5Settings
71
For each exposure mode, you can select the parameters for 
when Q and  R are turned and  M is pressed.
1Select [E-Dial Programming] in  A4 menu and 
press  D.
The [E-Dial Programming] screen appears.
2Select an exposure mode and press  D.The screen for the selected exposure mode appears.
3Select the desired setting 
for each exposure mode 
and press E.
4Press F.The [E-Dial Programming] screen reappears.
Repeat Steps 2 to 4.
5Press  F twice. t
 Memo
• If you select [Rotation Direction] in...

5Settings
72
4Press F.The [Button Customization] screen reappears.
Repeat Steps 2 to 4.
5Press  F twice.
u  Caution
• [LCD Panel Illumination] in [RAW/Fx Button] cannot be 
selected when [22. LCD Panel Illumination] is set to [Off] in 
the  E4 menu.
1Set [RAW/Fx Button] to [One Push File Format] 
in Step 3 of “Setting the Button Operation” 
(p.71).
2Select  T or  S for [Cancel after 1 shot].
3Select the file format when 
P  is pressed.
The left side is the [File Format] 
setting and the right side is the...

5Settings
73
Camera settings can be saved to O, P , and  Q of the mode 
dial and used repeatedly.
The following settings can be saved.
1Set all of the settings to save on the camera.
2Select [Save USER Mode] in  A4 menu and 
press  D.
The [Save USER Mode] screen appears.
3Select [Save Settings] and 
press D.
The [Save Settings] screen 
appears.
4Select [USER1], [USER2] or [USER3], and press 
D.
5Select [Save] and press  E.The screen of Step 3 reappears.
u Caution• [Save USER Mode] cannot be selected when...

5Settings
74
4After entering the text, move the text selection 
cursor to [Finish], and press E.
The [Rename USER Mode] screen reappears.
1Set the mode dial to  O, P , or  Q.The USER mode guide is 
displayed for 30 seconds.
Use  AB to check the saved 
settings.
2Change the settings as necessary.The exposure mode can be 
changed in [Exposure Mode] of 
the  A1 menu.
t Memo• The settings changed in Step 2 are not saved as USER mode 
settings. When the camera is turned off, the camera returns 
to the...

5Settings
75
t Memo• Refer to “List of World Time Cities” (p.94) for cities that can be 
selected as a hometown or destination.
• Select [ F Hometown] in Step 3 to change the city and DST 
settings for the hometown.
• G  appears in the control panel when [Time Setting] is set to 
G .
Most of the functions set on this camera are saved even if the 
camera is turned off. For the following function settings, you can 
select whether to save the settings ( T) or to return the settings 
to their default values...

5Settings
76
When images are captured with this camera, a folder is 
automatically created and the captured images are stored in the 
new folder. Each folder name consists of a sequential number 
from 100 to 999 and a string of 5 characters.
You can change the folder name in [Folder Name] of the D2 
menu.
1Select [Folder Name] in  D2 menu and press D.The [Folder Name] screen appears.
2Select a folder name and 
press  E.
Proceed to Step 5 if you do not need to change the folder 
name.
3Press  B, and then...

5Settings
77
One of the following string of characters is used as the file name 
prefix depending on the [21. Color Space] setting of the E3 
menu.
The first four characters can be changed to a character string of 
your choice.
1Select [File Name] in  D2 menu and press  D.The [File Name] screen appears.
2Select  A or  C and press 
D .
The text-entry screen appears.
3Change the text.Up to 4 single-byte alphanumeric characters can be 
entered.
Refer to Steps 3 and 4 of “Editing a Setting Name” (p.73) for...

5Settings
78
Sets the photographer and copyright information embedded in 
Exif data.
1Select [Copyright Information] in D2 menu and 
press  D.
The [Copyright Information] screen appears.
2Use CD to set [Embed 
Copyright Data].
3Select [Photographer] or [Copyright Holder], 
and press D.
The text-entry screen appears.
4Change the text.Up to 32 single-byte alphanumeric characters and symbols 
can be entered.
Refer to Steps 3 and 4 of “Editing a Setting Name” (p.73) for 
how to enter text.
5Press  F twice.
t...