Ricoh Mp C3000 Service Manual
Here you can view all the pages of manual Ricoh Mp C3000 Service Manual. The Ricoh manuals for All in One Printer are available online for free. You can easily download all the documents as PDF.
Page 1161
INTERNAL SHIFT TRAY B791
B791 INTERNAL SHIFT SORT TRAY SH3000
Page Date Added/Updated/New
None
Page 1162
Page 1163
![Page 1163
SM i B791
INTERNAL SHIFT TRAY B791
TABLE OF CONTENTS
1. REPLACEMENT AND ADJUSTMENT ............................................ 1
1.1 TRAY COVE R ........................................................................\
....................... 1
1.2 TRAY MOTOR AND HALF TURN SENSOR BOARD ................................... 2
2. DETAILED DESCRIPTIONS ............................................................ 3
2.1 COMPONENT LAYOUT...](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-1162.png "Page 1163
SM i B791
INTERNAL SHIFT TRAY B791
TABLE OF CONTENTS
1. REPLACEMENT AND ADJUSTMENT ............................................ 1
1.1 TRAY COVE R ........................................................................\
....................... 1
1.2 TRAY MOTOR AND HALF TURN SENSOR BOARD ................................... 2
2. DETAILED DESCRIPTIONS ............................................................ 3
2.1 COMPONENT LAYOUT...")
SM i B791 INTERNAL SHIFT TRAY B791 TABLE OF CONTENTS 1. REPLACEMENT AND ADJUSTMENT ............................................ 1 1.1 TRAY COVE R ........................................................................\ ....................... 1 1.2 TRAY MOTOR AND HALF TURN SENSOR BOARD ................................... 2 2. DETAILED DESCRIPTIONS ............................................................ 3 2.1 COMPONENT LAYOUT...
Page 1164
Page 1165
Read This First Safety and Symbols Replacement Procedure Safety ƒ Turn off the main power switch and unplug the machine before beginning any of the replacement procedures in this manual. Symbols Used in this Manual This manual uses the following symbols. : See or Refer to : Screws : Connector : Clip ring : Clamp : E-ring
Page 1166
Page 1167
![Page 1167
Tray Cover
SM 1 B791
B791
Internal Shift Tray
1. REPLACEMENT AND ADJUSTMENT
1.1 TRAY COVER
1. Remove the tray cover [A] by pressing on the two pawls [B] on the left side of the
cover.
– When Attaching the Tray Cover –
ƒ The right side of the tray cover should be attached first.
1. Fit the pawls [C] on the shift tray.
2. Align the square [D] so that it fits into the groove in the underside of the tray cover and
does not interfere with the attachment of the cover.
3. Complete...](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-1166.png "Page 1167
Tray Cover
SM 1 B791
B791
Internal Shift Tray
1. REPLACEMENT AND ADJUSTMENT
1.1 TRAY COVER
1. Remove the tray cover [A] by pressing on the two pawls [B] on the left side of the
cover.
– When Attaching the Tray Cover –
ƒ The right side of the tray cover should be attached first.
1. Fit the pawls [C] on the shift tray.
2. Align the square [D] so that it fits into the groove in the underside of the tray cover and
does not interfere with the attachment of the cover.
3. Complete...")
Tray Cover SM 1 B791 B791 Internal Shift Tray 1. REPLACEMENT AND ADJUSTMENT 1.1 TRAY COVER 1. Remove the tray cover [A] by pressing on the two pawls [B] on the left side of the cover. – When Attaching the Tray Cover – ƒ The right side of the tray cover should be attached first. 1. Fit the pawls [C] on the shift tray. 2. Align the square [D] so that it fits into the groove in the underside of the tray cover and does not interfere with the attachment of the cover. 3. Complete...
Page 1168
![Page 1168
Tray Motor and Half Turn Sensor Board
B791 2 SM
1.2 TRAY MOTOR AND HALF TURN SENSOR BOARD
1. Slip disc [A]
2. Tray motor [B] (
x 1)
3. Half turn sensor board [C] (
x 1).](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-1167.png "Page 1168
Tray Motor and Half Turn Sensor Board
B791 2 SM
1.2 TRAY MOTOR AND HALF TURN SENSOR BOARD
1. Slip disc [A]
2. Tray motor [B] (
x 1)
3. Half turn sensor board [C] (
x 1).")
Tray Motor and Half Turn Sensor Board B791 2 SM 1.2 TRAY MOTOR AND HALF TURN SENSOR BOARD 1. Slip disc [A] 2. Tray motor [B] ( x 1) 3. Half turn sensor board [C] ( x 1).
Page 1169
Component Layout SM 3 B791 B791 Internal Shift Tray 2. DETAILED DESCRIPTIONS 2.1 COMPONENT LAYOUT 1. Tray Cover 2. Slip Disc 3. Tray Motor 4. Half Turn Sensor Board
Page 1170
![Page 1170
Basic Operation
B791 4 SM
2.2 BASIC OPERATION
The shift tray allows copies to be sorted into separate piles on one tray.
From the left-right movement of the tray cover [A], the piles of copies are offset into two
positions, slightly overlapping one another.
The half turn sensor [B] detects the actuator [C ] of the slip disc. As a result, the machine
can determine if the tray is at the front side or the rear side.](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-1169.png "Page 1170
Basic Operation
B791 4 SM
2.2 BASIC OPERATION
The shift tray allows copies to be sorted into separate piles on one tray.
From the left-right movement of the tray cover [A], the piles of copies are offset into two
positions, slightly overlapping one another.
The half turn sensor [B] detects the actuator [C ] of the slip disc. As a result, the machine
can determine if the tray is at the front side or the rear side.")
Basic Operation B791 4 SM 2.2 BASIC OPERATION The shift tray allows copies to be sorted into separate piles on one tray. From the left-right movement of the tray cover [A], the piles of copies are offset into two positions, slightly overlapping one another. The half turn sensor [B] detects the actuator [C ] of the slip disc. As a result, the machine can determine if the tray is at the front side or the rear side.