Ricoh Mp C2500 User Guide

Interface Settings
63
2
IEEE 1394
This section describes the user tools in the IEEE 1394 menu under Interface Set-
tings.
[IEEE 1394] is displayed when this machine is installed with the IEEE 1394 inter-
face board.
❖IPv4 Address
Before using this machine in the network environment, you must specify the
IPv4 address and subnet mask.
When you select [Specify], enter the [Machine IPv4 Address] and [Sub-net Mask]
as “xxx.xxx.xxx.xxx” (“x” indicates a number).
If the IEEE 1394 interface board is installed,...

System Settings
64
2
❖WINS Configuration
Specify the WINS server settings.
If [On] is selected, specify the [WINS Server] IPv4 address as “xxx.xxx.xxx.xxx”
(“xxx” indicates a number).
If DHCP is in use, specify the [Scope ID].
Enter [Scope ID] using up to 31 characters.
On
 Primary WINS Server:000.000.000.000
 Secondary WINS Server:000.000.000.000
Scope ID
Off
❖IPv4 over 1394
When you use the IPv4 over 1394 function of the IEEE 1394 interface to con-
nect the machine to the network, or you print...

Interface Settings
65
2
IEEE 802.11b
This section describes the user tools in the IEEE 802.11b menu under Interface
Settings.
[IEEE 802.11b] is displayed when this machine is installed with the wireless LAN
interface board.
Be sure to make all settings simultaneously.
❖Communication Mode
Specifies the communication mode of the wireless LAN.
802.11 Ad hoc
Ad hoc
 Infrastructure
❖SSID Setting
Specifies SSID to distinguish the access point in infrastructure mode or 802.11
ad hoc mode.
The characters that...

System Settings
66
2
❖Transmission Speed
Specifies the communication speed of the IEEE 802.11b (wireless LAN).
Auto Select
 11Mbps Fixed
 5.5Mbps Fixed
2Mbps Fixed
1Mbps Fixed
❖Restore Factory Defaults
You can return the IEEE 802.11b (wireless LAN) settings to their defaults.
No
Yes
Print List
You can check items related to the network environment.
The configuration page shows the current network settings and network infor-
mation.
APress [System Settings].
BPress [Interface Settings].
CPress...

Interface Settings
67
2
DPress the {Start} key.
The configuration page is printed.
EPress [Exit].
FPress the {User Tools/Counter} key.
Note
❒You can also exit by pressing [Exit] on the User Tools main menu. 

System Settings
68
2File Transfer
This section describes the user tools in the File Transfer menu under System Set-
tings.
❖Delivery Option
Enables or disables sending stored or scanned documents to the ScanRouter
delivery server.
On
 Main Delivery Server IPv4 Address 
 Sub Delivery Server IPv4 Address
Off
Specify this option when selecting whether or not to use the ScanRouter de-
livery software. If you do, you will have to preregister I/O devices in the
ScanRouter delivery software.
❖Capture Server...

File Transfer
69
2
 File to Deliver
Specify whether all received fax documents or only received fax docu-
ments that include delivery codes (ID or SUB/SEP codes) are sent to the
ScanRouter delivery software.
 File with Delivery Code
All Files
 Delivery Failure File
If a received fax document cannot be sent to the ScanRouter delivery soft-
ware, it is stored in memory. To print a stored file, select [Print File], to de-
lete, select [Delete File].
If the machine can send the data to the ScanRouter...

System Settings
70
2
❖SMTP Authentication
Specify SMTP authentication (PLAIN, LOGIN, CRAMMD5, DIGEST-MD5).
When sending e-mail to an SMTP server, you can enhance the SMTP server
security level using authentication that requires entering the user name and
password.
If the SMTP server requires authentication, set [SMTP Authentication] to [On],
and then specify the user name, password and encryption.
Enter the user name and password to be set for the Administrators e-mail ad-
dress when using Internet Fax....

File Transfer
71
2
❖Reception Protocol
Specify Reception Protocol for receiving Internet Fax.
POP3
IMAP4
SMTP
❖POP3 / IMAP4 Settings
Specify the POP3/IMAP4 server name for receiving Internet faxes.
The specified POP3/IMAP4 server name is used for [POP before SMTP].
Server Name
If DNS is in use, enter the host name.
If DNS is not in use, enter the POP3/IMAP4 or server IPv4 address.
Enter POP3/IMAP4 server name using up to 127 characters. Spaces cannot
be entered.
Encryption
Auto
Password encryption...

System Settings
72
2
❖E-mail Communication Port
Specify the port numbers for receiving Internet faxes. The specified POP3
port number is used for [POP before SMTP].
POP3: 110
IMAP4: 143
SMTP: 25
Enter a port number between 1 and 65535 using the number keys, and then
press the {q} key.
❖E-mail Reception Interval
Specify, in minutes, the time interval for receiving Internet faxes via POP3 or
IMAP4 server.
On: 15 minute(s)
Off
If [On] is selected, the time interval can be specified from 2 to 1440 in...