Ricoh Gr 1 Instruction Manual

Before You Begin
19
Playback display
12345678
91011171612131416
15
Still image mode
Movie mode
1
Folder-file number ...............................P. 111
2 Current frame/Total frames ...................... —
3 Battery level ........................................... P. 20
4 Eye-Fi connection ................................... P. 20
5 Protected image ..................................... P. 85
6 DPOF print indicator ............................... P. 95
7 Data source...

Before You Begin
20
Battery Level Indicator
IconStatus
Battery fully charged.
Battery partially charged. Recharging the battery is recommended.
Low battery. Recharge the battery.
Eye-Fi Connection
When using an Eye-Fi card (GP. 24), the connection status is displayed in 
the shooting and playback modes.
IconStatus
Not connected
Connecting
Waiting for data transfer
Transferring
Connection terminated
Transferred images
Eye-Fi card information acquisition error
•	 Turn	the	camera	 off	and	 on.	If	the	 issue...

Before You Begin
21
Changing the Display
Use	the	DISP.	 button	 to	change	 the	information	 displayed	on	the	 picture	
display.
Shooting Mode
Select from the following displays in shooting mode:
Information display Grid guide
Level Information display Histogram
Graphic display
You	can	specify	the	information	displayed	
each time the DISP. button is pressed in [DISP. 
Button Display Setting] on the [Setup] menu. 
(GP. 110)
 Note ------------------------------------------------------------------------\...

Before You Begin
22
Playback Mode
Normal indicator displayDetailed information display
No indicator display White saturation display
 Note ------------------------------------------------------------------------\
-----------------------------------
•	 If	[On]	 is	selected	 for	[White	 Saturation	 Display]	in	the	 [Setup]	 menu,	the	white	 saturation	 areas	of	
the	 image	 flash	in	black	 in	the	 Highlights	 display.	When	this	is	set	 to	[Off ]	 (default	 setting),	 the	white	
saturation display is not...

Before You Begin
23
Getting Ready
Prepare the camera for use.
Inserting the Battery and a Memory Card
Be sure the camera is off before inserting or removing the battery and mem-
ory card.
SD memory cards, SDHC memory cards, and SDXC memory cards can be 
used with this camera. (“Memory card” refers to these memory cards in this 
guide.)
1 Slide the release lever on the bottom of the 
camera toward OPEN to open the battery/
card cover.
2 Make sure the memory card is facing the 
right way and then push the...

Before You Begin
24
 Eye-Fi Cards ------------------------------------------------------------------------\
--------------------------
•	 This	 camera	 is	compatible	 with	Eye-Fi	 cards	(X2	Series),	 SD	memory	 cards	with	built-in	 wireless LAN 
functionality. For more information on Eye-Fi cards, visit the Eye-Fi Website (http://www.eyefi.co.jp).
•	 When	using	an	Eye-Fi	card,	the	following	settings	are	displayed	in	the	[Setup]	menu.
Eye-Fi Connection Settings [Off ]:	Disables	 the	wireless	 LAN	function...

Before You Begin
25
Data Storage Location
Pictures taken with this camera can be recorded to the internal memory or a 
memory card. When a memory card is not set in the camera, data is recorded 
to the internal memory.
 Caution ------------------------------------------------------------------------\
-------------------------------
•	 Pictures	will	not	be	recorded	 to	the	 internal	 memory	 when	a	memory	 card	is	inserted,	 even	if	the	
memory card is full.
•	 If	 the	number	 of	files	 stored	 in	a...

Before You Begin
26
Charging the Battery
Charge the rechargeable battery (DB-65) using the included USB	cable	and	
USB	power	adapter	(AC-U1)	with	included	Power plug before use.
1 Insert the Power plug to the USB 
power adapter.
Insert it until it clicks into place.
2 Open the terminal cover, and 
connect the USB cable to the USB/
AV OUT terminal.
3 Connect the USB cable to the USB 
power adapter.
4 Plug the USB power adapter into a power outlet.
The auto focus/flash lamp turns on and charging starts....

Before You Begin
27
 Storage capacity ------------------------------------------------------------------------\
--------------------
•	 Approximately	290	shots	can	be	taken	when	the	battery	is	fully	charged.
•	 This	 is	based	 on	tests	 conducted	 according	to	CIPA	 standards	 under	the	following	 conditions:	 tem-
perature 23°C (73°F); picture display on; 10 shots taken with 30 seconds between shots and the flash 
fired with every other shot; and the cycle repeated after the camera has been turned off...

Before You Begin
28
Turning the Camera On and Off
Press the POWER button to turn the camera on.
The POWER button lights, and then the auto fo-
cus/flash lamp blinks for several seconds.
When the POWER button is pressed again, the 
power turns off. (If the date is not set, [0] is dis-
played.)
Using the Camera in Playback Mode
Press and hold the 6 button for at least one 
second to turn the camera on in playback 
mode.
Press the 6 button again to turn the camera 
off.