Ricoh Aficio MP2000SP User Manual
Here you can view all the pages of manual Ricoh Aficio MP2000SP User Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
Network Settings
23
1
Settings Required to Use Scan to Folder Function
This section lists the settings required for sending file.
Ethernet
This section lists the settings required for sending file with Ethernet cable.
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN...](http://img.usermanuals.tech/thumb/64/37674/w300_Ricoh_Aficio_MP2000SP-30.png "Page 31
Network Settings
23
1
Settings Required to Use Scan to Folder Function
This section lists the settings required for sending file.
Ethernet
This section lists the settings required for sending file with Ethernet cable.
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN...")
Network Settings 23 1 Settings Required to Use Scan to Folder Function This section lists the settings required for sending file. Ethernet This section lists the settings required for sending file with Ethernet cable. For details about how to specify the settings, see Interface Setting and File Transfer. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN...
Page 32
![Page 32
Connecting the Machine
24
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending file with IEEE 802.11b (wire-
less LAN).
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected...](http://img.usermanuals.tech/thumb/64/37674/w300_Ricoh_Aficio_MP2000SP-31.png "Page 32
Connecting the Machine
24
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending file with IEEE 802.11b (wire-
less LAN).
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected...")
Connecting the Machine 24 1 IEEE 802.11b (wireless LAN) This section lists the settings required for sending file with IEEE 802.11b (wire- less LAN). For details about how to specify the settings, see Interface Setting and File Transfer. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con- nected, the selected...
Page 33
![Page 33
Network Settings
25
1
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with Ether-
net cable.
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed....](http://img.usermanuals.tech/thumb/64/37674/w300_Ricoh_Aficio_MP2000SP-32.png "Page 33
Network Settings
25
1
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with Ether-
net cable.
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed....")
Network Settings 25 1 Settings Required to Use the Network Delivery Scanner This section lists the settings required for delivering data to network. Ethernet This section lists the settings required for delivering data to network with Ether- net cable. For details about how to specify the settings, see Interface Setting and File Transfer. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed....
Page 34
![Page 34
Connecting the Machine
26
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for delivering data to network with IEEE
802.11b (wireless LAN).
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the...](http://img.usermanuals.tech/thumb/64/37674/w300_Ricoh_Aficio_MP2000SP-33.png "Page 34
Connecting the Machine
26
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for delivering data to network with IEEE
802.11b (wireless LAN).
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the...")
Connecting the Machine 26 1 IEEE 802.11b (wireless LAN) This section lists the settings required for delivering data to network with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see Interface Setting and File Transfer. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the...
Page 35
![Page 35
Network Settings
27
1
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
Ethernet cable.
For details about how to specify the settings, see Interface Setting.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed....](http://img.usermanuals.tech/thumb/64/37674/w300_Ricoh_Aficio_MP2000SP-34.png "Page 35
Network Settings
27
1
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
Ethernet cable.
For details about how to specify the settings, see Interface Setting.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed....")
Network Settings 27 1 Settings Required to Use Network TWAIN Scanner This section lists the settings required for using TWAIN Scanner under the net- work environment. Ethernet This section lists the settings required for using network TWAIN Scanner with Ethernet cable. For details about how to specify the settings, see Interface Setting. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed....
Page 36
![Page 36
Connecting the Machine
28
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using network TWAIN Scanner with
IEEE 802.11b (wireless LAN).
For details about how to specify the settings, see Interface Setting.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface...](http://img.usermanuals.tech/thumb/64/37674/w300_Ricoh_Aficio_MP2000SP-35.png "Page 36
Connecting the Machine
28
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using network TWAIN Scanner with
IEEE 802.11b (wireless LAN).
For details about how to specify the settings, see Interface Setting.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface...")
Connecting the Machine 28 1 IEEE 802.11b (wireless LAN) This section lists the settings required for using network TWAIN Scanner with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see Interface Setting. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface...
Page 37
Network Settings 29 1 Using Utilities to Make Network Settings You can also specify network settings using utilities such as Web Image Monitor, SmartDeviceMonitor for Admin, and telnet. Note ❒For details about using Web Image Monitor, see Using Web Image Monitor, Network Guide. ❒For details about using SmartDeviceMonitor for Admin, see Using SmartDe- viceMonitor for Admin, Network Guide. ❒For Details about using telnet, see Remote Maintenance by telnet, Network Guide. Reference Using Web Image Monitor...
Page 38
![Page 38
Connecting the Machine
30
1
❖[Network] → [Machine IPv6 Address] → [Manual Config. Address]
Web Image Monitor: Can be used for specifying the setting.
SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
telnet: Can be used for specifying the setting.
❖[Network] → [IPv6 Stateless Setting]
Web Image Monitor: Can be used for specifying the setting.
SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
telnet: Can be used for specifying the setting....](http://img.usermanuals.tech/thumb/64/37674/w300_Ricoh_Aficio_MP2000SP-37.png "Page 38
Connecting the Machine
30
1
❖[Network] → [Machine IPv6 Address] → [Manual Config. Address]
Web Image Monitor: Can be used for specifying the setting.
SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
telnet: Can be used for specifying the setting.
❖[Network] → [IPv6 Stateless Setting]
Web Image Monitor: Can be used for specifying the setting.
SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
telnet: Can be used for specifying the setting....")
Connecting the Machine 30 1 ❖[Network] → [Machine IPv6 Address] → [Manual Config. Address] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [IPv6 Stateless Setting] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting....
Page 39
![Page 39
Network Settings
31
1
❖[Network] → [WINS Configuration] → [On] → [Scope ID]
Web Image Monitor: Can be used for specifying the setting.
SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
telnet: Can be used for specifying the setting.
❖[Network] → [Effective Protocol] → [IPv4]
Web Image Monitor: Can be used for specifying the setting.
SmartDeviceMonitor for Admin: When in communication with this ma-
chine with IPX/SPX, TCP/IP setting is enabled.
telnet: Can be used for...](http://img.usermanuals.tech/thumb/64/37674/w300_Ricoh_Aficio_MP2000SP-38.png "Page 39
Network Settings
31
1
❖[Network] → [WINS Configuration] → [On] → [Scope ID]
Web Image Monitor: Can be used for specifying the setting.
SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
telnet: Can be used for specifying the setting.
❖[Network] → [Effective Protocol] → [IPv4]
Web Image Monitor: Can be used for specifying the setting.
SmartDeviceMonitor for Admin: When in communication with this ma-
chine with IPX/SPX, TCP/IP setting is enabled.
telnet: Can be used for...")
Network Settings 31 1 ❖[Network] → [WINS Configuration] → [On] → [Scope ID] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [IPv4] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: When in communication with this ma- chine with IPX/SPX, TCP/IP setting is enabled. telnet: Can be used for...
Page 40
![Page 40
Connecting the Machine
32
1
❖[Network] → [NW Frame Type] → [Ethernet II]
Web Image Monitor: Can be used for specifying the setting.
SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
telnet: Can be used for specifying the setting.
❖[Network] → [NW Frame Type] → [Ethernet 802.2]
Web Image Monitor: Can be used for specifying the setting.
SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
telnet: Can be used for specifying the setting.
❖[Network] → [NW...](http://img.usermanuals.tech/thumb/64/37674/w300_Ricoh_Aficio_MP2000SP-39.png "Page 40
Connecting the Machine
32
1
❖[Network] → [NW Frame Type] → [Ethernet II]
Web Image Monitor: Can be used for specifying the setting.
SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
telnet: Can be used for specifying the setting.
❖[Network] → [NW Frame Type] → [Ethernet 802.2]
Web Image Monitor: Can be used for specifying the setting.
SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
telnet: Can be used for specifying the setting.
❖[Network] → [NW...")
Connecting the Machine 32 1 ❖[Network] → [NW Frame Type] → [Ethernet II] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Ethernet 802.2] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [NW...