Ricoh Aficio MP2000LN User Manual
Have a look at the manual Ricoh Aficio MP2000LN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
Connecting the Machine
18
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to use the
send function.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒When SMTP...](http://img.usermanuals.tech/thumb/64/37673/w64_Ricoh_Aficio_MP2000LN-25.png "Page 26
Connecting the Machine
18
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to use the
send function.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒When SMTP...")
![Page 28
Connecting the Machine
20
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to use the
send function.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4...](http://img.usermanuals.tech/thumb/64/37673/w64_Ricoh_Aficio_MP2000LN-27.png "Page 28
Connecting the Machine
20
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to use the
send function.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4...")
![Page 29
Network Settings
21
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port.
Reference
p.45...](http://img.usermanuals.tech/thumb/64/37673/w64_Ricoh_Aficio_MP2000LN-28.png "Page 29
Network Settings
21
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port.
Reference
p.45...")
![Page 30
Connecting the Machine
22
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port....](http://img.usermanuals.tech/thumb/64/37673/w64_Ricoh_Aficio_MP2000LN-29.png "Page 30
Connecting the Machine
22
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port....")
![Page 31
Network Settings
23
1
Settings Required to Use Scan to Folder Function
This section lists the settings required for sending file.
Ethernet
This section lists the settings required for sending file with Ethernet cable.
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN...](http://img.usermanuals.tech/thumb/64/37673/w64_Ricoh_Aficio_MP2000LN-30.png "Page 31
Network Settings
23
1
Settings Required to Use Scan to Folder Function
This section lists the settings required for sending file.
Ethernet
This section lists the settings required for sending file with Ethernet cable.
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN...")
![Page 32
Connecting the Machine
24
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending file with IEEE 802.11b (wire-
less LAN).
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected...](http://img.usermanuals.tech/thumb/64/37673/w64_Ricoh_Aficio_MP2000LN-31.png "Page 32
Connecting the Machine
24
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending file with IEEE 802.11b (wire-
less LAN).
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected...")
![Page 33
Network Settings
25
1
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with Ether-
net cable.
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed....](http://img.usermanuals.tech/thumb/64/37673/w64_Ricoh_Aficio_MP2000LN-32.png "Page 33
Network Settings
25
1
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with Ether-
net cable.
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed....")
![Page 34
Connecting the Machine
26
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for delivering data to network with IEEE
802.11b (wireless LAN).
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the...](http://img.usermanuals.tech/thumb/64/37673/w64_Ricoh_Aficio_MP2000LN-33.png "Page 34
Connecting the Machine
26
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for delivering data to network with IEEE
802.11b (wireless LAN).
For details about how to specify the settings, see Interface Setting and File
Transfer.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the...")
![Page 35
Network Settings
27
1
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
Ethernet cable.
For details about how to specify the settings, see Interface Setting.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed....](http://img.usermanuals.tech/thumb/64/37673/w64_Ricoh_Aficio_MP2000LN-34.png "Page 35
Network Settings
27
1
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
Ethernet cable.
For details about how to specify the settings, see Interface Setting.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed....")
![Page 36
Connecting the Machine
28
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using network TWAIN Scanner with
IEEE 802.11b (wireless LAN).
For details about how to specify the settings, see Interface Setting.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface...](http://img.usermanuals.tech/thumb/64/37673/w64_Ricoh_Aficio_MP2000LN-35.png "Page 36
Connecting the Machine
28
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using network TWAIN Scanner with
IEEE 802.11b (wireless LAN).
For details about how to specify the settings, see Interface Setting.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface...")
Network Settings 23 1 Settings Required to Use Scan to Folder Function This section lists the settings required for sending file. Ethernet This section lists the settings required for sending file with Ethernet cable. For details about how to specify the settings, see Interface Setting and File Transfer. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. Reference p.45 “Interface Settings” p.51 “File Transfer” Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address Necessary Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network LAN Type Necessary Interface Settings/Network Permit SNMPv3 Communictn. As required Interface Settings/Network Permit SSL/TLS Comm. As required Interface Settings/Network Host Name As required File Transfer Default User Name/PW(Send) As required Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 24 1 IEEE 802.11b (wireless LAN) This section lists the settings required for sending file with IEEE 802.11b (wire- less LAN). For details about how to specify the settings, see Interface Setting and File Transfer. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con- nected, the selected interface takes precedence. Reference p.45 “Interface Settings” p.51 “File Transfer” Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address Necessary Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network LAN Type Necessary Interface Settings/Network Permit SNMPv3 Communictn. As required Interface Settings/Network Permit SSL/TLS Comm. As required Interface Settings/Network Host Name As required Interface Setting/ IEEE 802.11bCommunication Mode Necessary Interface Setting/ IEEE 802.11bSSID Setting As required Interface Setting/ IEEE 802.11bChannel As required Interface Setting/ IEEE 802.11bSecurity Type As required Interface Setting/ IEEE 802.11bCommunication Speed As required File Transfer Default User Name/PW(Send) As required Downloaded From ManualsPrinter.com Manuals
Network Settings 25 1 Settings Required to Use the Network Delivery Scanner This section lists the settings required for delivering data to network. Ethernet This section lists the settings required for delivering data to network with Ether- net cable. For details about how to specify the settings, see Interface Setting and File Transfer. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se- lected interface takes precedence. ❒If Delivery Option is set to [On], check that IPv4 Address is set. Reference p.45 “Interface Settings” p.51 “File Transfer” Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network Ethernet Speed As required Interface Settings/Network LAN Type Necessary Interface Settings/Network Permit SNMPv3 Communictn. As required Interface Settings/Network Permit SSL/TLS Comm. As required Interface Settings/Network Host Name As required File Transfer Delivery Option As required Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 26 1 IEEE 802.11b (wireless LAN) This section lists the settings required for delivering data to network with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see Interface Setting and File Transfer. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒If Delivery Option is set to [On], check that IPv4 Address is set. Reference p.45 “Interface Settings” p.51 “File Transfer” Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network LAN Type Necessary Interface Settings/Network Permit SNMPv3 Communictn. As required Interface Settings/Network Permit SSL/TLS Comm. As required Interface Settings/Network Host Name As required Interface Setting/ IEEE 802.11bCommunication Mode Necessary Interface Setting/ IEEE 802.11bSSID Setting As required Interface Setting/ IEEE 802.11bChannel As required Interface Setting/ IEEE 802.11bSecurity Type As required Interface Setting/ IEEE 802.11bCommunication Speed As required File Transfer Delivery Option As required Downloaded From ManualsPrinter.com Manuals
Network Settings 27 1 Settings Required to Use Network TWAIN Scanner This section lists the settings required for using TWAIN Scanner under the net- work environment. Ethernet This section lists the settings required for using network TWAIN Scanner with Ethernet cable. For details about how to specify the settings, see Interface Setting. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se- lected interface takes precedence. Reference p.45 “Interface Settings” Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network LAN Type Necessary Interface Settings/Network Ethernet Speed As required Interface Settings/Network Permit SNMPv3 Communictn. As required Interface Settings/Network Permit SSL/TLS Comm. As required Interface Settings/Network Host Name As required Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 28 1 IEEE 802.11b (wireless LAN) This section lists the settings required for using network TWAIN Scanner with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see Interface Setting. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.45 “Interface Settings” Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required Interface Settings/Network Domain Name As required Interface Settings/Network WINS Configuration As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network LAN Type Necessary Interface Settings/Network Permit SNMPv3 Communictn. As required Interface Settings/Network Permit SSL/TLS Comm. As required Interface Settings/Network Host Name As required Interface Setting/ IEEE 802.11bCommunication Mode Necessary Interface Setting/ IEEE 802.11bSSID Setting As required Interface Setting/ IEEE 802.11bChannel As required Interface Setting/ IEEE 802.11bSecurity Type As required Interface Setting/ IEEE 802.11bCommunication Speed As required Downloaded From ManualsPrinter.com Manuals
Network Settings 29 1 Using Utilities to Make Network Settings You can also specify network settings using utilities such as Web Image Monitor, SmartDeviceMonitor for Admin, and telnet. Note ❒For details about using Web Image Monitor, see Using Web Image Monitor, Network Guide. ❒For details about using SmartDeviceMonitor for Admin, see Using SmartDe- viceMonitor for Admin, Network Guide. ❒For Details about using telnet, see Remote Maintenance by telnet, Network Guide. Reference Using Web Image Monitor Network Guide Using SmartDeviceMonitor for Admin Network Guide Remote Maintenance by telnet, Network Guide Interface Settings Change settings by using Web Image Monitor, SmartDeviceMonitor for Admin, and telnet. ❖[Network] → [Machine IPv4 Address] → [Auto-Obtain (DHCP)] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Machine IPv4 Address] → [Specify] → [IP Add.] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Machine IPv4 Address] → [Specify] → [Subnet M] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [IPv4 Gateway Address] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 30 1 ❖[Network] → [Machine IPv6 Address] → [Manual Config. Address] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [IPv6 Stateless Setting] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [DNS Configuration] → [Auto-Obtain (DHCP)] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [DNS Configuration] → [Specify] → [Server 1-3] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [DDNS Configuration] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Domain Name] → [Auto-Obtain (DHCP)] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Domain Name] → [Specify] → [Domain] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [WINS Configuration] → [On] → [Server 1-2] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Network Settings 31 1 ❖[Network] → [WINS Configuration] → [On] → [Scope ID] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [IPv4] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: When in communication with this ma- chine with IPX/SPX, TCP/IP setting is enabled. telnet: Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [IPv6] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [NetWare] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: When in communication with this ma- chine with TCP/IP, NetWare (IPX/SPX) setting is enabled. telnet: Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [SMB] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [AppleTalk] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [NCP Delivery Protocol] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Can be used for specifying the setting. telnet: Cannot be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Auto Select] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 32 1 ❖[Network] → [NW Frame Type] → [Ethernet II] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Ethernet 802.2] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Ethernet 802.3] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Ethernet SNAP] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [SMB Computer Name] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [SMB Work Group] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [Ethernet Speed] Web Image Monitor: Cannot be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. ❖[Network] → [LAN Type] → [Ethernet] Web Image Monitor: Can be used for specifying the setting. SmartDeviceMonitor for Admin: Cannot be used for specifying the setting. telnet: Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals