Ricoh Aficio MP C3000 User Manual
Here you can view all the pages of manual Ricoh Aficio MP C3000 User Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 121
Stamp 113 3 ❖Stamp Color You can set the selected priority color when printing the date. Yellow Red Cyan Magenta Green Blue Black ❖Page Numbering Initial Letter You can select the page numbering initial letter between “P1, P2.../P.1, P.2...” and “S1, S2.../S.1, S.2...”. P1, P2.../P.1, P.2... S1, S2.../S.1, S.2... Downloaded From ManualsPrinter.com Manuals
Page 122
![Page 122
Copier / Document Server Features
114
3Input/Output
This section describes the user tools in the Input/Output menu under Copier /
Document Server Features.
❖Switch to Batch
You can select to have Batch mode or SADF mode displayed when you press
the [Special Original] key.
Batch
SADF
❖SADF Auto Reset
In SADF mode, an original must be set within a specified time after the pre-
vious original has been fed.
You can adjust this time from 3 to 99 seconds in increments of 1 second.
The default setting is 5...](http://img.usermanuals.tech/thumb/64/37699/w300_Ricoh_Aficio_MP_C3000-121.png "Page 122
Copier / Document Server Features
114
3Input/Output
This section describes the user tools in the Input/Output menu under Copier /
Document Server Features.
❖Switch to Batch
You can select to have Batch mode or SADF mode displayed when you press
the [Special Original] key.
Batch
SADF
❖SADF Auto Reset
In SADF mode, an original must be set within a specified time after the pre-
vious original has been fed.
You can adjust this time from 3 to 99 seconds in increments of 1 second.
The default setting is 5...")
Copier / Document Server Features 114 3Input/Output This section describes the user tools in the Input/Output menu under Copier / Document Server Features. ❖Switch to Batch You can select to have Batch mode or SADF mode displayed when you press the [Special Original] key. Batch SADF ❖SADF Auto Reset In SADF mode, an original must be set within a specified time after the pre- vious original has been fed. You can adjust this time from 3 to 99 seconds in increments of 1 second. The default setting is 5...
Page 123
Input/Output 115 3 ❖Select Stapling Position Specify which Top 2 staples or Bottom shown on the initial display with pri- ority. The optional 500-sheet finisher, 1000-sheet finisher, or booklet finisher is re- quired to use this function. Top Slant/Left Bottom Slant/Left Lett 2 Top 2 Top Bottom Saddle Stitch Off ❖Select Punch Type Specify which punch type (2 holes or 3 holes) has priority to be shown on the initial display. The optional 500-sheet finisher, 1000-sheet finisher, or booklet...