Ricoh Aficio MP C2500e1 User Manual

Stamp
113
3
❖Stamp Color
You can set the selected priority color when printing the date.
Yellow
Red
Cyan
Magenta
Green
Blue
Black
❖Page Numbering Initial Letter
You can select the page numbering initial letter between “P1, P2.../P.1, P.2...”
and “S1, S2.../S.1, S.2...”.
P1, P2.../P.1, P.2...
 S1, S2.../S.1, S.2...
Downloaded From ManualsPrinter.com Manuals 

Copier / Document Server Features
114
3Input/Output
This section describes the user tools in the Input/Output menu under Copier /
Document Server Features.
❖Switch to Batch
You can select to have Batch mode or SADF mode displayed when you press
the [Special Original] key.
Batch
SADF
❖SADF Auto Reset
In SADF mode, an original must be set within a specified time after the pre-
vious original has been fed.
You can adjust this time from 3 to 99 seconds in increments of 1 second.
The default setting is 5...

Input/Output
115
3
❖Select Stapling Position
Specify which Top 2 staples or Bottom shown on the initial display with pri-
ority.
The optional 500-sheet finisher, 1000-sheet finisher, or booklet finisher is re-
quired to use this function.
Top Slant/Left
 Bottom Slant/Left
Lett 2
Top 2
Top
Bottom
 Saddle Stitch
Off
❖Select Punch Type
Specify which punch type (2 holes or 3 holes) has priority to be shown on the
initial display.
The optional 500-sheet finisher, 1000-sheet finisher, or booklet...

Copier / Document Server Features
116
3
❖Simplified Screen: Finishing Types
You can select which key is displayed with higher priority for “Finishing
Types” on the Simplified Screen.
Stack
Staple: Top
Staple: Slant
 Staple: Bottom
Staple: Left 2
2 Holes Left
3 Holes Left
4 Holes Left
Do not Display
Reference
“Orientation-Fixed Paper or Two-Sided Paper”, Troubleshooting
“Batch mode”, Copy/ Document Server Reference
“Sort”, Copy/ Document Server Reference
Downloaded From ManualsPrinter.com Manuals 

Adjust Color Image
117
3 Adjust Color Image
This section describes the user tools in the Adjust Color Image menu under Cop-
ier / Document Server Features.
❖ADS Background (Full Color)
“The background density is adjusted to skip the texture and copy. You can
adjust the background density up to 5 levels when in Full Color.
Center of the 5 level adjustment is set by default.
❖Color Sensitivity
You can adjust the color specified to convert in “Color Convert” and the color
specified for “Erase Color”, in 5...

Copier / Document Server Features
118
3Settings for the Document Server
For details, see “System Settings”, and “Copier / Document Server Features”.
❖Copier / Document Server Features
❖System Settings
Reference
p.89 “Copier / Document Server Features”
p.47 “System Settings”
Heading items Default
General Features Document Server Storage key2 Sided original: 
Top to Top
General Features Document Server Storage key
1 Sided → 1 Sided 
Combine: 2 originals
General Features Document Server Storage key1 Sided →...

119
4. Facsimile Features
This chapter describes user tools in the Facsimile Features menu.
General Features
This section describes the user tools in the General Features menu under Facsim-
ile Features.
❖Quick Operation Key (1-3)
Frequently used functions programmed as Quick Operation keys are shown
on the menu immediately after the power is turned on.
If [On] is selected, the Quick Operation keys can be programmed with the fol-
lowing items:
On
 Manual E-mail RX
 PIN Code TX
 Send Later
Subject...

Facsimile Features
120
4
Up to three functions can be programmed to a Quick Operation keys.
Functions that appear dimmed have already been set.
❖Switch Title of Quick Dial Table
Select the title to be shown on the destination list.
 Title 1
 Title 2
 Title 3
❖Search Destination
Select a destination list to be used in “Search Destination”.
You can select from Address Book, or registered LDAP Server.
❖Communication Page Count
Checks the transmission and reception, and totals on the display....

General Features
121
4
❖On Hook Mode Release Time
Use this function to specify a time to cancel On Hook mode after you transmit
using On Hook dialing.
1 minute
3 minutes
5 minutes
 10 minutes
Reference
p.168 “Box Settings”
“Adjusting the Volume”, Troubleshooting
“Sending at a Specific Time (Send Later)”, Facsimile Reference
“Fax Header Print”, Facsimile Reference
“Reading the Display”, Facsimile Reference
Downloaded From ManualsPrinter.com Manuals 

Facsimile Features
122
4Scan Settings
This section describes the user tools in the Scan Settings menu under Facsimile
Features.
❖Program / Change / Delete Scan Size
You can program, change, or cancel frequently used scan sizes.
For details about programming Scan Size, see “Program / Change / Delete
Scan Size”.
Reference
p.139 “Program / Change / Delete Scan Size”
Downloaded From ManualsPrinter.com Manuals