Ricoh Aficio MP 7500 User Manual
Here you can view all the pages of manual Ricoh Aficio MP 7500 User Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
Connecting to the Interfaces
13
1
Checking the Signal
When using in infrastructure mode, you can check the machines radio wave sta-
tus using the control panel.
APress [System Settings].
BPress [Interface Settings].
CPress [IEEE 802.11b].
DPress [Wireless LAN Signal].
The machines radio wave status appears.
EAfter checking radio wave status, press [Exit].
FPress the {User Tools/Counter} key to return to the User Tools / Counter / En-
quiry menu.
Note
❒To check the radio wave status, press [IEEE 802.11b]...](http://img.usermanuals.tech/thumb/64/37694/w300_Ricoh_Aficio_MP_7500-20.png "Page 21
Connecting to the Interfaces
13
1
Checking the Signal
When using in infrastructure mode, you can check the machines radio wave sta-
tus using the control panel.
APress [System Settings].
BPress [Interface Settings].
CPress [IEEE 802.11b].
DPress [Wireless LAN Signal].
The machines radio wave status appears.
EAfter checking radio wave status, press [Exit].
FPress the {User Tools/Counter} key to return to the User Tools / Counter / En-
quiry menu.
Note
❒To check the radio wave status, press [IEEE 802.11b]...")
Connecting to the Interfaces
13
1
Checking the Signal
When using in infrastructure mode, you can check the machines radio wave sta-
tus using the control panel.
APress [System Settings].
BPress [Interface Settings].
CPress [IEEE 802.11b].
DPress [Wireless LAN Signal].
The machines radio wave status appears.
EAfter checking radio wave status, press [Exit].
FPress the {User Tools/Counter} key to return to the User Tools / Counter / En-
quiry menu.
Note
❒To check the radio wave status, press [IEEE 802.11b]...
Page 22
Connecting the Machine 14 1Network Settings This section describes the network settings you can change with User Tools (Sys- tem Settings). Make settings according to functions you want to use and the in- terface to be connected. Important ❒These settings should be made by the systems administrator, or after consult- ing with the systems administrator. Settings Required to Use the Printer This section lists the settings required for using the printer function. Ethernet This section lists the settings...
Page 23
![Page 23
Network Settings
15
1
Note
❒IPv6 can be used only for the printer function.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when optional wireless LAN board is installed. If
Ethernet and IEEE 802.11b (wireless LAN) are both connected, the selected in-
terface has priority.
Reference
p.55 “Interface Settings”
p.65 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for using Printer with IEEE 1394 inter-
face...](http://img.usermanuals.tech/thumb/64/37694/w300_Ricoh_Aficio_MP_7500-22.png "Page 23
Network Settings
15
1
Note
❒IPv6 can be used only for the printer function.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when optional wireless LAN board is installed. If
Ethernet and IEEE 802.11b (wireless LAN) are both connected, the selected in-
terface has priority.
Reference
p.55 “Interface Settings”
p.65 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for using Printer with IEEE 1394 inter-
face...")
Network Settings 15 1 Note ❒IPv6 can be used only for the printer function. ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when optional wireless LAN board is installed. If Ethernet and IEEE 802.11b (wireless LAN) are both connected, the selected in- terface has priority. Reference p.55 “Interface Settings” p.65 “File Transfer” IEEE 1394 (IPv4 over 1394) This section describes necessary set items for using Printer with IEEE 1394 inter- face...
Page 24
Connecting the Machine 16 1 IEEE 802.11b (wireless LAN) This section describes necessary set items for using Printer with IEEE 802.11b (wireless LAN). For details about specifying the settings, see Interface Settings and File Transfer. Heading Setting Item Setting Requirements Interface Settings/Network Machine IPv4 Address Mandatory Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network Machine IPv6 Address As required Interface Settings/Network IPv6 Gateway Address As...
Page 25
![Page 25
Network Settings
17
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.55 “Interface Settings”
p.65 “File Transfer”
Settings Required to Use E-mail Function
This section describes necessary set items for sending e-mail.
Ethernet
This section describes...](http://img.usermanuals.tech/thumb/64/37694/w300_Ricoh_Aficio_MP_7500-24.png "Page 25
Network Settings
17
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.55 “Interface Settings”
p.65 “File Transfer”
Settings Required to Use E-mail Function
This section describes necessary set items for sending e-mail.
Ethernet
This section describes...")
Network Settings 17 1 Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter- face board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.55 “Interface Settings” p.65 “File Transfer” Settings Required to Use E-mail Function This section describes necessary set items for sending e-mail. Ethernet This section describes...
Page 26
![Page 26
Connecting the Machine
18
1Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒When setting [POP before SMTP] to [On], also make setting for[Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication...](http://img.usermanuals.tech/thumb/64/37694/w300_Ricoh_Aficio_MP_7500-25.png "Page 26
Connecting the Machine
18
1Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒When setting [POP before SMTP] to [On], also make setting for[Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication...")
Connecting the Machine 18 1Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[LAN Type] is displayed when optional wireless LAN interface board is in- stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒When setting [POP before SMTP] to [On], also make setting for[Reception Proto- col] and [POP3 / IMAP4 Settings]. ❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail Communication...
Page 27
![Page 27
Network Settings
19
1
Note
❒[IEEE 1394] is displayed when optional IEEE 1394 interface board is installed.
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒When setting [POP before SMTP] to [On], also make setting for[Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication Port].
Reference
p.55 “Interface Settings”
p.65 “File Transfer”
IEEE 802.11b (wireless LAN)
This section describes...](http://img.usermanuals.tech/thumb/64/37694/w300_Ricoh_Aficio_MP_7500-26.png "Page 27
Network Settings
19
1
Note
❒[IEEE 1394] is displayed when optional IEEE 1394 interface board is installed.
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒When setting [POP before SMTP] to [On], also make setting for[Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication Port].
Reference
p.55 “Interface Settings”
p.65 “File Transfer”
IEEE 802.11b (wireless LAN)
This section describes...")
Network Settings 19 1 Note ❒[IEEE 1394] is displayed when optional IEEE 1394 interface board is installed. ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒When setting [POP before SMTP] to [On], also make setting for[Reception Proto- col] and [POP3 / IMAP4 Settings]. ❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail Communication Port]. Reference p.55 “Interface Settings” p.65 “File Transfer” IEEE 802.11b (wireless LAN) This section describes...
Page 28
![Page 28
Connecting the Machine
20
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒When setting [POP before SMTP] to [On], also make setting for[Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication...](http://img.usermanuals.tech/thumb/64/37694/w300_Ricoh_Aficio_MP_7500-27.png "Page 28
Connecting the Machine
20
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒When setting [POP before SMTP] to [On], also make setting for[Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication...")
Connecting the Machine 20 1 Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[LAN Type] is displayed when optional wireless LAN interface board is in- stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒When setting [POP before SMTP] to [On], also make setting for[Reception Proto- col] and [POP3 / IMAP4 Settings]. ❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail Communication...
Page 29
![Page 29
Network Settings
21
1
Settings Required to Use Scan to Folder Function
This section describes necessary set items for sending file.
Ethernet
This section describes necessary set items for sending file with ethernet cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN...](http://img.usermanuals.tech/thumb/64/37694/w300_Ricoh_Aficio_MP_7500-28.png "Page 29
Network Settings
21
1
Settings Required to Use Scan to Folder Function
This section describes necessary set items for sending file.
Ethernet
This section describes necessary set items for sending file with ethernet cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN...")
Network Settings 21 1 Settings Required to Use Scan to Folder Function This section describes necessary set items for sending file. Ethernet This section describes necessary set items for sending file with ethernet cable. For details about specifying the settings, see Interface Settings and File Transfer. Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[LAN Type] is displayed when optional wireless LAN interface board is in- stalled. If both ethernet and wireless LAN...
Page 30
![Page 30
Connecting the Machine
22
1
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for sending file with IEEE 1394 inter-
face cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒[IEEE 1394] is displayed when optional IEEE 1394 interface board is installed.
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
Reference
p.55 “Interface Settings”
p.65 “File Transfer”
Heading Setting Item Setting Requirements
Interface...](http://img.usermanuals.tech/thumb/64/37694/w300_Ricoh_Aficio_MP_7500-29.png "Page 30
Connecting the Machine
22
1
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for sending file with IEEE 1394 inter-
face cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒[IEEE 1394] is displayed when optional IEEE 1394 interface board is installed.
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
Reference
p.55 “Interface Settings”
p.65 “File Transfer”
Heading Setting Item Setting Requirements
Interface...")
Connecting the Machine 22 1 IEEE 1394 (IPv4 over 1394) This section describes necessary set items for sending file with IEEE 1394 inter- face cable. For details about specifying the settings, see Interface Settings and File Transfer. Note ❒[IEEE 1394] is displayed when optional IEEE 1394 interface board is installed. ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. Reference p.55 “Interface Settings” p.65 “File Transfer” Heading Setting Item Setting Requirements Interface...