Ricoh Aficio MP 6000SP User Manual
Here you can view all the pages of manual Ricoh Aficio MP 6000SP User Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
Connecting to the Interfaces
11
1
Checking the Connection
This section describes how to check the IEEE 802.11b (wireless LAN) interface.
Check the wireless LAN connection.
Make sure the LED of the IEEE 802.11b interface unit is lit.
❖When using in infrastructure mode
1.If [LAN Type] on the [Interface Set-
tings] / [Network] screen is not set to
[IEEE 802.11b], it does not light, even
if the main power is on.
2.If it is connected properly to the
network, the LED is green when in
infrastructure mode. If...](http://img.usermanuals.tech/thumb/64/37691/w300_Ricoh_Aficio_MP_6000SP-20.png "Page 21
Connecting to the Interfaces
11
1
Checking the Connection
This section describes how to check the IEEE 802.11b (wireless LAN) interface.
Check the wireless LAN connection.
Make sure the LED of the IEEE 802.11b interface unit is lit.
❖When using in infrastructure mode
1.If [LAN Type] on the [Interface Set-
tings] / [Network] screen is not set to
[IEEE 802.11b], it does not light, even
if the main power is on.
2.If it is connected properly to the
network, the LED is green when in
infrastructure mode. If...")
Connecting to the Interfaces 11 1 Checking the Connection This section describes how to check the IEEE 802.11b (wireless LAN) interface. Check the wireless LAN connection. Make sure the LED of the IEEE 802.11b interface unit is lit. ❖When using in infrastructure mode 1.If [LAN Type] on the [Interface Set- tings] / [Network] screen is not set to [IEEE 802.11b], it does not light, even if the main power is on. 2.If it is connected properly to the network, the LED is green when in infrastructure mode. If...
Page 22
Connecting the Machine 12 1 ❖When using in adhoc mode / 802.11 adhoc mode 1.If the IEEE 802.11b interface unit is working, it is lit in orange. 2.If it is connected properly to the network, the LED is green when in adhoc mode or 802.11 adhoc mode. If the LED is blinking, the machine is searching for devices. The LED will light after a few seconds. Print the configuration page to verify settings. Note ❒For more information about printing a configuration page, see “Printing the configuration page”....
Page 23
Network Settings 13 1 Network Settings This section describes the network settings you can change with User Tools (Sys- tem Settings). Make settings according to functions you want to use and the in- terface to be connected. Important ❒These settings should be made by the systems administrator, or after consult- ing with the systems administrator. Settings Required to Use the Printer/LAN-Fax This section lists the settings required for using the printer or LAN-Fax function. Ethernet This section lists...
Page 24
![Page 24
Connecting the Machine
14
1
Note
❒IPv6 can be used only for the printer function.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when optional wireless LAN board is installed. If Eth-
ernet and IEEE 802.11b (wireless LAN) are both connected, the selected inter-
face has priority.
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
IEEE 802.11b (wireless LAN)
This section lists the settings required for using the printer or LAN-Fax...](http://img.usermanuals.tech/thumb/64/37691/w300_Ricoh_Aficio_MP_6000SP-23.png "Page 24
Connecting the Machine
14
1
Note
❒IPv6 can be used only for the printer function.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when optional wireless LAN board is installed. If Eth-
ernet and IEEE 802.11b (wireless LAN) are both connected, the selected inter-
face has priority.
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
IEEE 802.11b (wireless LAN)
This section lists the settings required for using the printer or LAN-Fax...")
Connecting the Machine 14 1 Note ❒IPv6 can be used only for the printer function. ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when optional wireless LAN board is installed. If Eth- ernet and IEEE 802.11b (wireless LAN) are both connected, the selected inter- face has priority. Reference p.49 “Interface Settings” p.56 “File Transfer” IEEE 802.11b (wireless LAN) This section lists the settings required for using the printer or LAN-Fax...
Page 25
![Page 25
Network Settings
15
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Settings Required to Use Internet Fax
This section lists the settings required for using Internet Fax.
Ethernet
This section lists the...](http://img.usermanuals.tech/thumb/64/37691/w300_Ricoh_Aficio_MP_6000SP-24.png "Page 25
Network Settings
15
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Settings Required to Use Internet Fax
This section lists the settings required for using Internet Fax.
Ethernet
This section lists the...")
Network Settings 15 1 Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter- face board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.49 “Interface Settings” p.56 “File Transfer” Settings Required to Use Internet Fax This section lists the settings required for using Internet Fax. Ethernet This section lists the...
Page 26
![Page 26
Connecting the Machine
16
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], also make settings for Reception Pro-
tocol and POP3 / IMAP4...](http://img.usermanuals.tech/thumb/64/37691/w300_Ricoh_Aficio_MP_6000SP-25.png "Page 26
Connecting the Machine
16
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], also make settings for Reception Pro-
tocol and POP3 / IMAP4...")
Connecting the Machine 16 1 Note ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. ❒SMTP Server and Fax E-mail Account must be specified in order to send In- ternet Fax. ❒When POP before SMTP is set to [On], also make settings for Reception Pro- tocol and POP3 / IMAP4...
Page 27
Network Settings 17 1 IEEE 802.11b (wireless LAN) This section lists the settings required for using Internet Fax with an IEEE 802.11b (wireless LAN) connection. For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Menu User Tool Setting Requirements Interface Settings/NetworkMachine IPv4 Address Necessary Interface Settings/NetworkIPv4 Gateway Address Necessary Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As...
Page 28
![Page 28
Connecting the Machine
18
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], you must also make settings for Recep-
tion...](http://img.usermanuals.tech/thumb/64/37691/w300_Ricoh_Aficio_MP_6000SP-27.png "Page 28
Connecting the Machine
18
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], you must also make settings for Recep-
tion...")
Connecting the Machine 18 1 Note ❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con- nected, the selected interface takes precedence. ❒SMTP Server and Fax E-mail Account must be specified in order to send In- ternet Fax. ❒When POP before SMTP is set to [On], you must also make settings for Recep- tion...
Page 29
![Page 29
Network Settings
19
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒When setting [POP before SMTP] to [On], also make setting for [Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port]....](http://img.usermanuals.tech/thumb/64/37691/w300_Ricoh_Aficio_MP_6000SP-28.png "Page 29
Network Settings
19
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒When setting [POP before SMTP] to [On], also make setting for [Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port]....")
Network Settings 19 1 Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[LAN Type] is displayed when optional wireless LAN interface board is in- stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒When setting [POP before SMTP] to [On], also make setting for [Reception Proto- col] and [POP3 / IMAP4 Settings]. ❒When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail Communication Port]....
Page 30
Connecting the Machine 20 1 IEEE 802.11b (wireless LAN) This section lists the settings required for sending e-mail with an IEEE 802.11b (wireless LAN) connection. For details about specifying the settings, see “Interface Settings” and “File Transfer”. Heading Setting Item Setting Requirements Interface Settings/NetworkMachine IPv4 Address Necessary Interface Settings/NetworkIPv4 Gateway Address Necessary Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration...