Home > Remington > Firearms > Remington SPR 18 Instruction Manual

Remington SPR 18 Instruction Manual

Here you can view all the pages of manual Remington SPR 18 Instruction Manual. The Remington manuals for Firearms are available online for free. You can easily download all the documents as PDF.

Page 11

11
Instructions For Assembly Of Rifle  (cont’d)
4.Now that the barrel has been locked into the receiver, you must reattach the fore end to the barrel.
Pull the forearm latch out and place the fore end on receiver.  With an upward swing motion lock the fore
end onto the barrel.  Do not force the fore end into its locked position.  While it may be necessary to push
the latch into its final flat position, never force the latch into position.  (See 
Picture 24.)
Loading and Unloading Your Rifle
WARNING
Never...

Page 12

Loading and Unloading Your Rifle  (cont’d)
TO LOAD:
1. Make sure the ammunition that you are using is the correct size and gauge.  The barrel is marked with the
caliber.
2. Visually inspect the chamber and barrel for obstructions by breaking open the rifle by depressing the
locking lever and tipping the barrel down.  The chamber and barrel should be free of oil or grease or
obstructions.  (See 
Picture 25).
3. After inspection, load the correct type of shot shell into the chamber making sure that the...

Page 13

13
Loading and Unloading Your Rifle  (cont’d)
TO UNLOAD:
1. Break open the rifle by depressing the locking lever and tipping the barrel down.  (See Picture 30).
2. Remove the cartridge from the chamber by grabbing it by the rim of the cartridge and pulling it form the
chamber.  (See 
Picture 31).
3. Visually check the barrel to make sure that it is free from obstructions.  (See 
Picture 32).
Firing Your Rifle
WARNING: NEVER LOAD A CARTRIDGE INTO THE CHAMBER UNTIL YOU ARE READY TO FIRE THE RIFLE.
WARNING...

Page 14

15
Firing Your Rifle  (cont’d)
TO FIRE THE RIFLE:
1. Make sure the rifle is pointed in a safe direction with the trigger block safety engaged.  (See Picture 33).
2. Make sure you are wearing eye and ear protection.
3. Keep your fingers away from the trigger.  (See 
Picture 34).
4. Push the trigger block safety to the “off” or “fire” position with the red ring showing.  (See 
Picture 35).
5.With the butt stock held firmly against your shoulder and the barrel pointed towards your intended target,
place...

Page 15

Directions For Disassembly Of The Rifle
1. Make sure the rifle is unloaded (FOLLOW UNLOADING INSTRUCTIONS)  and pointed in a safe direc
tion.
2. Make sure the trigger block safety is engaged in the “on” or “safe” position.  (See 
Picture 37).
3. Remove the forend from the barrel by pulling out the mechanical lever in the lower center of the fore
end and removing the fore end in a downward outward swinging motion.  Never force the fore end off the
barrel and receiver.  (See 
Picture 38).
4. With the...

Page 16

16
Manufacturer’s Warning
This firearm was manufactured to properly perform with the original parts as designed.  It is your duty to make
sure any parts you buy are correctly installed and that neither replacements nor originals are altered or changed.
Your rifle has many parts that must relate correctly to other parts for safe and accurate operation.  Putting a gun
together wrong or with modified parts can result in a damaged gun, or personal injury or death to you or
others. Always let a qualified...

Page 17

17
DANGER – Ammunition Warning
Firearms may be damaged and serious personal injury or death to the shooter or bystanders may result from any
condition which contributes to the generation of excessive pressure or uncontrolled release of gas within the
firearm. Such adverse conditions can be caused by bore or chamber obstructions, propellant powder overloads or
by defective, incorrect or improperly loaded and assembled cartridge components. Even the strongest firearm can
be blown up as a result of...

Page 18

19
PARTS AND SERVICE  (cont’d)
One Year Limited Warranty
Transportation to and from our repair facilities, government fees, damage caused by failure to perform normal
maintenance, sales outside the United States, damage caused by use of high velocity, high pressure, reloaded or
other nonstandard ammunition, or by any unauthorized repair, modification, misuse, abuse or alteration of the rifle
is not covered by this Limited Warranty.
Implied Warranty
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES...

Page 19

19
PARTS LIST
Model SPR18 Single Shot Rifle Exploded View
1.  barrel22.  firing pin44.  stock screw
2.  sling swivel base 23.  firing pin retaining pin 45.  washer
3.  sling swivel ring 24.  locking lever pin 46.  buttplate 
4.  pin25.  locking lever47.  woodscrew
5.  front sight 26.  locking lever spring 48.  stock sling swivel base
6.  extractor pin 27.  locking lever spring pin 49.  cocking indicator spring
7.  extractor 28.  cocking indicator 50.  mainspring
8.  forend29.  hammer 51.  trigger spring...

Page 20

2021
MODEL 18 EXPLODED VIEW ENLARGED
Model 18 Parts Lists
1.barrel
7.extractor
60. extractor catch
61. extractor catch spring
62.  extractor catch pin 
Start reading Remington SPR 18 Instruction Manual

Related Manuals for Remington SPR 18 Instruction Manual

All Remington manuals