Remington 798, 799 Instruction Manual

Loading a Rifle With a Detachable Box Magazine (cont’d)
NOTESingle loading:Your rifle may be loaded with a single round in the chamber and no cartridges in the detachable box magazine.  To singleload
the rifle, simply skip Steps 4 through 7 above.
Loading the magazine only:Your rifle may be loaded with no round in the chamber and a full magazine.  To accomplish this type of loading,
follow Steps 1 through 7 above.  Then do not load a round directly into the chamber and press down on the top cartridge of...

Unloading a Rifle With a Hinged Floor Plate (cont’d)
WARNINGAt this stage of the unloading process, your rifle still has a live round in the chamber which may be fired even though the magazine has been
unloaded.  Never assume your rifle cannot fire simply because the magazine is empty.
5. The magazine spring and follower will be released from the magazine allowing the cartridges to empty out
from the magazine into your hand. 
(SeePicture 18)
6. With the bolt open (fully to the rear), look into the...

Unloading a Rifle With a Detachable Box Magazine (cont’d)
WARNINGAt this stage in the unloading process, your rifle still has a live round in the chamber which may be fired even though the box magazine has
been removed.  Never assume your rifle cannot fire simply because the box magazine has been removed.
4. Lift the bolt handle and pull the bolt fully to the rear to remove the cartridge from the chamber.
(SeePicture 20)
5. With the bolt open (fully to the rear), look into the chamber and magazine well...

15
Picture 21
CLEANING INSTRUCTIONS
WARNINGNEVER attempt to clean a loaded firearm.  Make sure the rifle is completely unloaded (chamber and magazine empty) before cleaning.
Cleaning the Barrel
1. Make sure the safety is engaged in the “safe” position.
2. Remove the bolt from the rifle.
3. Select a cleaning rod and brush of the appropriate caliber for your rifle.
4. Soak the cleaning brush with a quality gun cleaning solvent (such as Remington BriteBore® solvent or 
Remington Bore Cleaner).
5. Push the...

PARTS & SERVICE
To Order Parts
ALL PARTS ARE SUBJECT TO A $10.00 CHARGE FOR SHIPPING AND HANDLING.  Some parts are restricted and
may only be installed by returning the rifle to us.  When ordering parts, please state the Model, Caliber, Serial
Number, and Finish Color when ordering.  For parts information, call (321)6391432.
Service
To obtain information about returning your rifle for service or repairs, call (321)6391432.
One Year Limited Warranty
This rifle is warranted to the original retail customer...

17
MODEL 798
Bolt Action Centerfire Rifle
16     

MODEL 798
Bolt Action Centerfire Rifle
PARTS LIST
17
3 Receiver
4 Barrel
1,2 Bolt
34 Ejector Box
35 Ejector Box Spring
36 Ejector
37 Ejector Box Screw
38 Screw
39 Extractor Ring
6 Bolt Sleeve 7Bolt Sleeve Catch
8 Bolt Sleeve Catch Spring
9 Firing Pin Spring
5 Firing Pin
10 Cocking Piece
14 Sear15Safety Lever Screw
16 Pusher
11,12 Safety
17 Safety Lever18Safety Screw
19 Trigger
20 Sear Spring
21,27Sear Pin
22 Screw
23Pusher Screw
24Pusher Spring
25 Ball Spring
26 Fixing Ring28 Safety Spring
29 Lower...

19
18
MODEL 799
Bolt Action Centerfire Rifle    

19
MODEL 799
Bolt Action Centerfire Rifle
PARTS LIST
4 Receiver
5 Barrel
1 Bolt
36 Extractor
37 Ring
38 Bolt Guide Pin
39 Ejector Box
40 Ejector Box Spring
41 Ejector Box Screw
42 Screw43Ejector
44Bolt Guide
11 Sear Pin
6 Bolt Sleeve
7 Cocking Piece
8Firing Pin
9 Bolt Sleeve Catch
10 Bolt Sleeve Catch Spring
11 Screw12Firing Pin Spring
15 Housing
16 Sear
17 Safety Lever Screw
18 Pusher
13 Safety14Safety
20 Safety Screw
21 Trigger
22Sear Spring24 Screw
25 Pusher Screw
26 Pusher Spring
27 Ball Spring
28...

Remington is a trademark registered in the United States Patent and Trademark Office by Remington Arms Company, Inc.