Remington 7600 Instruction Manual

To Adjust the Sights
TO ADJUST THE REAR SIGHT:
For elevation (up and down adjustments) and
windage (left and right adjustments), move the rear
sight in the same direction as you need to move the
bullet on the target. See Picture 12.
NOTE:For more information on ballistics and trajectory,
see the REMINGTON®catalog.
TELESCOPIC SIGHTS:
The top of the receiver has holes for the installation of
telescopic sights.
Lubrication and Maintenance
NOTE:The chamber should be cleaned before loading and firing the...

TO CLEAN THE TRIGGER PLATE ASSEMBLY:
WARNING:
Make sure there are no cartridges in the magazine or chamber.
1. Engage the safety mechanism. 
RED BAND WILL NOT SHOW.
2. Close the action. 
3. Tap out front and rear trigger plate pins. 
4. Lift rear of the trigger plate assembly and remove the assembly
from the receiver. See Picture 13.
NOTE:Clean trigger plate assembly as a unit with Rem™ Oil.
5. Spray the trigger plate assembly with Rem™ Oil as shown. See Picture 14.
Let stand for 15 minutes. Spray again...

13
REPAIR SERVICES
1. To locate the Remington®Authorized Repair Center nearest you visit our web site at www.remington.com
and use our Repair Service Locator. If you need additional on-line assistance, e-mail us at info@reming-
ton.com to obtain a listing of Authorized Repair Centers. Contact the Authorized Repair Center of your
choice for evaluation of your firearm and/or additional shipping instructions.
2. If your Remington Authorized Repair Center cannot provide the service or repair you require and...

14
MODEL 7600™
Pump Action Centerfire Rifle  

15
NOTE:Basic .30-06 Caliber listed below.
See Exploded View for proper identification of parts.
1 Action Bar Assembly
2 Action Bar Lock
3 Action Bar Lock Spring
4 Action Tube Assembly
5 Action Tube Ring
6 Barrel Assembly
7 Barrel Extension Bolt
8 Breech Bolt
9 Butt Plate Frame (New Style not Shown)
10 Butt Plate Frame Screw
Butt Plate Insert (Not Shown)
Butt Plate Insert Screw
12 Cam Pin (Large)
13 Cam Pin (Small)
14 Elevation Screw
15 Ejector Port Cover
16 Ejector
17 Ejector Retaining Pin
18 Ejector...

16
Model _________________ Serial # ________________  Date Purchased ______________
Purchased From ___________________________ Price Paid _________________________
Remember to complete and return the Firearm Warranty Registration Card in order to 
obtain full benefit of your Limited Two Year Firearm Warranty.
A WORD ON THE MAINTENANCE AND CARE OF YOUR REMINGTON FIREARM
Don’t Alter or Modify Your Gun and Have it Serviced Regularly.
Your firearm hasbeen designed to operate according to certain factory...

17
DATE SERVICE PERFORMED PERFORMED BY
Firearm Maintenance Record 

18
DATE SERVICE PERFORMED PERFORMED BY
Firearm Maintenance Record 

19
DATE SERVICE PERFORMED PERFORMED BY
Firearm Maintenance Record 

Printed in U.S.A. Remington is a trademark registered in the United States Patent 
and Trademark Office by Remington Arms Company, Inc.
Form RD 7057  Rev. Orig 4-01