Remington 7400 Instruction Manual

11
To Adjust the Sights
TO ADJUST THE REAR SIGHT:
For elevation (up and down adjustments) and windage 
(left and right adjustments), move the rear sight in the 
same direction as you need to move the bullet on the 
target. See Picture 12.
NOTE:For more information on ballistics and trajectory, see the 
REMINGTON®catalog.
TELESCOPIC SIGHTS:
The top of the receiver has holes for the installation of telescopic sights.
Lubrication and Maintenance
NOTE:The chamber should be cleaned before loading and firing...

TO CLEAN THE CHAMBER: 
Use the chamber brush that comes with the firearm.
WARNING:Check the chamber and magazine to make sure that there are
no cartridges in the firearm. 
1. Engage the safety mechanism. 
RED BAND WILL NOT SHOW. 
2. Pull the operating handle rearward until held open by the magazine 
follower. 
3. Put the brush into the cleaning solvent. 
4. Push the brush into the chamber through the ejection port. Repeat 
several times. See Picture 13.
5. Using the rear of the cleaning brush with...

How to Obtain Parts and Service From Remington.®
TO ORDER PARTS:
Many Remington Dealers and Authorized Repair Centers carry a full line of parts. Please check with them first
before ordering parts.
To expedite your PARTS order or request REPAIR SERVICE visit our web site at www.remington.com. Detailed
instructions are provided along with parts and/or service order forms. You may also reach Remington by calling
our toll free customer service number, 1-800-243-9700, Mon.-Fri., 9:00 AM-5:00 PM Eastern time....

14
MODEL 7400™
Autoloading Centerfire Rifle  

15
NOTE:Basic .30-06 Caliber listed below.
See Exploded View for proper identification of parts.
1 Action Bar Assembly
2 Action Spring
3 Action Tube
4 Action Tube Support
5 Action Tube Support Pin
6 Barrel Assembly
7 Barrel Extension Bolt
8 Barrel Take Down Nut (.30-06)
9 Breech Bolt
10 Butt Plate Frame (New Style not Shown) 
11 Butt Plate Frame Screw
Butt Plate Insert (New Style not Shown)
Butt Plate Insert Screw
13 Cam Pin
14 Disconnector
15 Disconnector Spring
16 Ejector Port Cover
17 Ejector
18...

16
Model _________________ Serial # ________________  Date Purchased ______________
Purchased From ___________________________ Price Paid _________________________
Remember to complete and return the Firearm Warranty Registration Card in order to 
obtain full benefit of your Limited Two Year Firearm Warranty.
A WORD ON THE MAINTENANCE AND CARE OF YOUR REMINGTON FIREARM
Don’t Alter or Modify Your Gun and Have it Serviced Regularly.
Your firearm hasbeen designed to operate according to certain factory...

DATE SERVICE PERFORMED PERFORMED BY
Firearm Maintenance Record
17 

18
DATE SERVICE PERFORMED PERFORMED BY
Firearm Maintenance Record 

DATE SERVICE PERFORMED PERFORMED BY
Firearm Maintenance Record
19 

Printed in U.S.A. Remington is a trademark registered in the United States Patent 
and Trademark Office by Remington Arms Company, Inc.
Form RD 7056  Rev. Orig 4-01